In your career, let’s prove what’s possible.
- Improve, and standardize test methods and test fixtures for Lam products.
- Lead test fixture transitions to suppliers, including training, documentation, and on-site support when required.
- Own supplier test and facility readiness, including test reviews, sign-off activities, and risk assessment prior to Test fixture building and transitions.
- Coordinate test fixture duplication and rebuild efforts in close collaboration with pilot team.
- Provide remote and on-site support to suppliers during test-related line-down situations to ensure rapid issue resolution.
- Verify and set up duplicated test fixtures to ensure proper functionality and compliance with requirements.
- Maintain and update test documentation and test fixture Bills of Materials (BOMs) when required.
- Drive continuous yield, quality, and process improvements through test data analysis, root cause investigations, and corrective action implementation.
- Support the introduction of new products/components, design changes, or process updates by assessing test impact and readiness at supplier sites.
- Define and maintain supplier test best practices to ensure consistency across remote factories.
- Escalate unresolved or systemic issues to Leads, or Supervisors in a timely and structured manner.
- Perform system-level and component-level electrical testing and troubleshooting.
- Utilize basic testing equipment such as multi-meter, power supply, and RS connections.
- Define and document test and diagnostic programs, including procedures to support testing of new components based on Non-Standard Request or Change Orders.
- Improve testing methods for systems and equipment throughout product development and manufacturing phases.
- Collaborate with the Manufacturing Engineering team, suppliers, account teams, and Supplier Engineering Technology (SET) members to ensure seamless integration and smooth transitions.
- Work with internal and external stakeholders to influence decisions and drive company objectives
|
|
|
|
|
Teilzeit | befristet | Praktikum
|
In your career, let’s prove what’s possible.
- Designs, develops, and implements cost-efficient methods to test and troubleshoot systemsand equipment for all phases of product development and manufacturing.
- Prepares test and diagnostic programs, designs test fixtures and equipment, and documentsspecifications and procedures for new products.
- Plans labor, cost, timeline, and equipment required for testing
- Managing of work packages for Lam internal and external resources, who supports with testfixture design and Python coding
- Transfer test fixtures to suppliers (including traveling and training)
- Off- and On-side support for supplier
- Support Manufacturing Engineering activities like assembly instruction creation, BOM andassembly verification for specific programs
- Implement new ideas and defining new ways of testing to reduce costs and test time
|
Teilzeit | befristet | Praktikum
|
befristet | Leasing, Zeitarbeit
|
|
|
In your career, let’s prove what’s possible.
- Design, develop, and maintain electrical and electronic circuits throughout all phases of the product lifecycle.
- Drive component selection, circuit development, design verification, testing, and evaluation of control systems for our products.
- Collaborate closely with a multidisciplinary engineering team, including electrical, mechanical, and software engineers, technical support specialists, productivity engineers, and external suppliers, to design, develop, and enhance custom and OEM components.
- Develop, execute, and analyze test plans and procedures to ensure technical and operational requirements are fully met, validated, and documented.
- Collect, evaluate, and present technical data and findings to support informed decision-making during design, project, and program reviews.
|
Qualifikation und Anforderung
- Technische Ausbildung, HTL, FH, Uni oder Lehrabschluss
- Berufserfahrung in der Halbleiterindustrie von Vorteil
- Teamfähigkeit und Motivation
- Sauberkeit und sorgfältige Arbeitsweise
- Gute Umgangsformen im Team oder mit Kunden
- Fortgeschrittene EDV-Kenntnisse, Programmierkenntnisse von Vorteil
- Fachwissen im Bereich Sensorik und Aktorik von Vorteil
- Sehr gute Deutsch- und Englischkenntnisse in Wort und Schrift
- Belastbarkeit und Reisebereitschaft
|
Teilzeit | befristet | Praktikum
|
Vollzeit | Leasing, Zeitarbeit
In your career, let’s prove what’s possible.
- Support the full life cycle of mechanical and electro-mechanical systems from concept to productizationincluding conceptualization, designing, CAD modeling, development, and test/validation.
- Designs components using variety of metals, ceramics, quartz, plastics, and advanced coatings.
- Ensure documentation aligns with SEMI, Lam standards, and industry best practices for geometricdimensioning and tolerancing (GD&T).
- Conduct detailed analysis including structural, finite element analysis (FEA), thermal, heat transfer, stress,vibrations, fluid and gas flow dynamics, and manufacturability to properly specify designs.
- Conduct feasibility studies and test plans to characterize and validate design performance.
- Prepare high-quality reports and technical presentations to clearly communicate design intent, evaluationand validation to a diverse audience in design reviews.
- Collaborate with suppliers and internal teams to ensure solutions can be manufactured with high-quality,cost-optimized, and to requirements.
- Provide key deliverables including Failure Modes and Effects Analysis (FMEA), technical specifications,risk analysis, test specifications, and design review presentations
|
|
|
Vollzeit
Obdach
24.08.2026
Obdach
Ihre Aufgaben
- Entwicklung elektronischer Neuprodukte inklusive Embedded Software (C/C++) für Robotik, Smart Home und Akku-Plattform
- Konzeption, Aufbau und Test elektronischer Baugruppen vom Prototyp bis zur Serienreife
- Entwicklung von Test- und Serviceprogrammen sowie technische Unterstützung bei Neuentwicklungen
- Mitarbeit in Projekten und Sicherstellung von Qualitäts- und Normanforderungen inklusive Auditunterstützung
|
Teilzeit | befristet | Praktikum
|
Vollzeit | Teilzeit | befristet | Praktikum
|
Teilzeit | befristet | Praktikum
|
Nutze diese Karrierechance!
- Chauffieren der Kund:innen quer durch Klagenfurt mit unserer modernen Busflotte
- Ticketverkauf sowie kompetente und freundliche Betreuung unserer Kund:innen
- Tägliche Kontrolle der Verkehrs- und Betriebssicherheit Deines Busses
|
Dein Aufgabengebiet:
- Du bist verantwortlich für die Instandhaltung und Wartung von Maschinen und Produktionsanlagen.
- Du suchst und behebst Fehler und Störungen an Maschinen, Geräten und betriebsspezifischen Anlagen.
- Hierfür verwendest Du verschiedene Messverfahren und -geräte sowie Test- und Diagnosesoftware und beurteilst & dokumentierst die Messergebnisse.
|
|
|
|
|
Ihr Aufgabengebiet
- Funktionsbeschuss von Prototypen
- Durchführen von waffentechnischen Analysen und Definition möglicher Lösungen
- Technische Dokumentationen und Berichtswesen
- Endmontage von Prototypen und Unterstützung bei der Serienübergabe
- Unterstützung bei der Überarbeitung und Verbesserung bestehender Test- und Prüfabläufe
- Schiesskanäle und Vorrichtungen sauber sowie funktionsfähig halten
- Die Position bietet daher eine ausgezeichnete Grundlage für eine fachliche Weiterentwicklung. Bei entsprechender Eignung und Entwicklung besteht daher die Möglichkeit, schrittweise Aufgaben in der Konstruktion und Produktentwicklung zu übernehmen.
|
Vollzeit | Teilzeit | Praktikum
|
In your career, let’s prove what’s possible.
- Design, develop, and maintain analogue and digital electronic circuits throughout the complete product lifecycle
- Perform component selection, schematic capture, circuit simulation, and PCB design to meet performance, cost, and reliability targets
- Drive technical requirements from concept through implementation, test, and release
- Collaborate with mechanical, software, systems, manufacturing, quality, and service engineering teams during product development
- Support system integration activities involving sensors, actuators, communication networks, and control systems
- Create and maintain engineering documentation including schematics, test reports, BOMs, design reviews, and technical specifications
|
Vollzeit
Obdach
25.08.2026
Obdach
Ihre Aufgaben
- Entwicklung innovativer Hardwarelösungen für Rasenmäher und Rasenroboter - von der Konzeptphase bis zur Serienreife
- Schaltungs- und Leiterplattenentwicklung inklusive Layout, Komponentenwahl sowie Erstellung relevanter Fertigungsunterlagen
- Analyse und Auslegung sicherheitsrelevanter Funktionen inklusive Risiko- und Zuverlässigkeitsbewertung (zB MTTFd)
- Aufbau, Test und Validierung von Prototypen sowie enge Zusammenarbeit mit internen Bereichen und Unterstützung bei EMV-Themen und Audits
|
Vollzeit | Leasing, Zeitarbeit
|
|
|
In your career, let’s prove what’s possible.
- Responsible for performing professional process engineering research, development and evaluation in semiconductor environment
- Reviews processing techniques and methods applied in the manufacture, fabrication and evaluation of products including in-house lab demonstrations
- Conceives and plans projects involving definition and selection of new concepts and approaches
- Works with customer and senior engineers cross functionally to understand roadmaps, process flow, inflection points, requirements and business issues/ challenges.
- Acts as customer technology manager in the planning, data collection, analysis and reporting
- Acts as single point of contact accountable for process related customer requests
- Drives introduction and evaluation of new technologies at customer sites including new tool qualification
|
|
|
|
|
