Was wir bieten
- Flexible Arbeitszeiten
- Weiterentwicklungspotenzial
- Abwechslungsreiches Aufgabengebiet
- Erfolgreiches Unternehmen mit flacher Hierarchie
- Angenehmes Betriebsklima
|
Dein Aufgabengebiet:
- Selbstständige, eigenverantwortliche Abwicklung aller operativen kaufmännischen Baustellen-Agenden
- Erstellung von Baustellenerfolgsübersichten und Auswertungen
- Berichtswesen sowie laufende Soll-Ist-Vergleiche
- Durchführen der Baustellenabrechnung
- Unterstützung im Bereich Materialeinkauf
- Rechnungsprüfung und -buchung
|
Allgemeines
- Laufende Buchhaltungstätigkeiten mit Schwerpunkt Immobilien-und Hausverwaltung
- Prüfen und Erstellen von Mietvorschreibungen, Indexabrechnungen sowie Betriebskostenabrechnungen
- Fristenüberwachung
- Erstellung der monatlichen Abschlüsse
- Mitarbeit bei der Erstellung von monatlichen Soll/Ist Vergleichen, Reporting und beim Jahresabschluss
- Mitarbeit bei der jährlichen Budgetplanung
- Mitarbeit bei der Erstellung, Prüfung und Verwaltung von Verträgen, sowie Fristenüberwachung
- Organisatorische Unterstützung und laufende Korrespondenz mit Behörden, Hausverwaltungen und Mietern
|
Allgemeines
- Sie sind für den Bereich Non Food verantwortlich (Elektro- und Büroartikel, Haushalts- und Saisonartikel, Spielwaren)
- Sie sind Verkäufer:in aus Leidenschaft und die persönliche Beratung macht Ihnen Freude
- Sie koordinieren die Warenverfügbarkeit und Warenpräsentation (Fokus auf attraktive Aktions- und Saisonplatzierungen)
- Sie setzen Sortimentsvorgaben und Arbeitstechniken selbständig um
- Die Motivation und die Weiterentwicklung Ihrer Mitarbeitenden liegen Ihnen am Herzen
- Gemeinsam mit Ihrem Team arbeiten Sie laufend an der Erfüllung der Bereichskennzahlen
|
In your career, let’s prove what’s possible.
- Plan, support, report specific type of shipments to worldwide customers
- Execute daily export compliance tasks
- Verify export documentation to ensure that same is accurately prepared and in compliance with LAM Research internal procedures, all relevant Customs/regulatory requirements
- Team with third party service providers, customs brokers, freight forwarders, and suppliers as necessary to implement and/or maintain customs compliance and logistics processes in support of operations
- Communicate with Austrian customs office
- Review root cause and respond to export issues tied to customs data identified during internal audits
- Document desk procedure
- Create more efficient ways of recurring tasks with support of available tools and/or AI
|
In your career, let’s prove what’s possible.
- Build production-grade Python packages.
- Follow and build project scaffolds (PowerShell), follow coding standards, and reproducible workflows.
- Transform analyses into standardized currently best-known methods (cBKM)
- Process data and automate data flows; manage and optimize data structure & data bases for big data sets.
- Interact with product and service teams to identify questions and issues for data analysis and experiments.
- Interpret and communicate data analysis results and experiments to product, service & business managers.
- Design, build and maintain dashboards.
- Process confidential data and information according to guidelines.
- Support to setup iterating reports, analysis and dashboards.
|
Vollzeit | Leasing, Zeitarbeit
In your career, let’s prove what’s possible.
- Allgemeine Lagertätigkeiten
- Durchführung von Kommissioniertätigkeiten im Lager
- Ein- und Auslagerung sowie innerbetrieblicher Transport von Waren
- Ausführung physischer Aufgaben in Verbindung mit der Einlagerung, Kommissionierung und Verteilung von Waren
- Heben von schweren Gegenständen (bis zu 15 kg) und Bedienung eines Gabelstapler
|
In your career, let’s prove what’s possible.
- Review, analyze and process purchase requisitions
- Process purchase change orders and requests for quotes (RFQ's) to suppliers
- Manage purchase order releases daily to meet demand requirements
- Coordinate purchasing activities with manufacturing, planning and engineering departments to acquire inventory in a cost effective and timely manner
- Work with the suppliers on a daily basis to assure scheduled deliveries are met
- Understand, maintain weekly reports
- Develop and maintain key supplier relationships with day-to-day interface (peer level) to review open action items, suppliers performance to commitments of on time deliveries, future demand and future cost reductions forecasting
|
Vollzeit | Leasing, Zeitarbeit
In your career, let’s prove what’s possible.
- Support the full life cycle of mechanical and electro-mechanical systems from concept to productizationincluding conceptualization, designing, CAD modeling, development, and test/validation.
- Designs components using variety of metals, ceramics, quartz, plastics, and advanced coatings.
- Ensure documentation aligns with SEMI, Lam standards, and industry best practices for geometricdimensioning and tolerancing (GD&T).
- Conduct detailed analysis including structural, finite element analysis (FEA), thermal, heat transfer, stress,vibrations, fluid and gas flow dynamics, and manufacturability to properly specify designs.
- Conduct feasibility studies and test plans to characterize and validate design performance.
- Prepare high-quality reports and technical presentations to clearly communicate design intent, evaluationand validation to a diverse audience in design reviews.
- Collaborate with suppliers and internal teams to ensure solutions can be manufactured with high-quality,cost-optimized, and to requirements.
- Provide key deliverables including Failure Modes and Effects Analysis (FMEA), technical specifications,risk analysis, test specifications, and design review presentations
|
Vollzeit | Leasing, Zeitarbeit
In your career, let’s prove what’s possible.
- Conduct measurements, inspections, and SEM investigations to generate, evaluate, and interpret data in support of customer demonstrations.
- Perform periodic checks of metrology tools using Statistical Process Control (SPC) methods, ensuring they remain within specified limits and deliver consistent output.
- Participate in the planning and coordination of preventive maintenance and calibration activities.
- Serve as the point of contact for equipment suppliers and laboratory visitors during troubleshooting and improvement activities.
- Support metrology engineers in carrying out specialized metrology and analytical tasks.
|
In your career, let’s prove what’s possible.
- Support the full life cycle of mechanical and electro-mechanical systems from concept to productization including conceptualization, designing, CAD modeling, development, and test/validation.
- Designs components using variety of metals, ceramics, quartz, plastics, and advanced coatings.
- Ensure documentation aligns with SEMI, Lam standards, and industry best practices for geometric dimensioning and tolerancing (GD&T).
- Conduct detailed analysis including structural, finite element analysis (FEA), thermal, heat transfer, stress, vibrations, fluid and gas flow dynamics, and manufacturability to properly specify designs.
- Develop and conduct feasibility studies and test plans to characterize and validate design performance.
- Prepare high-quality reports and technical presentations to clearly communicate design intent, evaluation, and validation to a diverse audience in design reviews.
- Collaborate with suppliers and internal teams to ensure solutions can be manufactured with high-quality, cost-optimized, and to requirements.
- Provide key deliverables including Failure Modes and Effects Analysis (FMEA), technical specifications, risk analysis, test specifications, and design review presentations.
- Provide technical guidance and mentoring to more junior engineers.
|
In your career, let’s prove what’s possible.
- Develop, verify, and document fluid delivery systems in accordance with system specifications, engineering standards, and product requirements.
- Create system architectures, technical concepts, and detailed designs based on engineering calculations, modeling, and simulation results.
- Clarify, define, and derive system requirements for new products, features, and technologies.
- Defining operational concepts such as functional and process descriptions (Theory of Operation) for software development.
- Perform engineering analyses of fluidic, mechanical, and electrical system aspects using appropriate methods and tools such as Python, MATLAB, LabVIEW, or comparable engineering software.
- Ensure compliance with all applicable safety, regulatory, and engineering standards through risk assessments, FMEA activities, and technical reviews.
- Own the execution of BOM management, documentation release plans, and required development deliverables throughout the product development process.
- Ensure successful integration of the system by driving technical alignment of interfaces with other modules, subsystems, and the operating environment
- Collaborate closely with suppliers and cross-functional teams to develop robust, high-quality, well-tested, and cost-effective solutions.
|
In your career, let’s prove what’s possible.
- Provide service, maintenance, and repair support for advanced high-tech equipment at customer sites.
- Troubleshoot technical issues and identify root causes of equipment failures.
- Install, start up, and relocate equipment when required.
- Perform diagnostics and implement solutions to minimize downtime.
- Support equipment upgrades and engineering changes.
- Read and work with electrical and mechanical drawings, diagrams, and manuals.
- Maintain accurate service and project documentation.
- Collaborate with customers and internal teams to ensure excellent service.
- Support and execute smaller technical projects and gradually take ownership of more complex tasks.
|
Vollzeit | Teilzeit | befristet | Praktikum
|
In your career, let’s prove what’s possible.
- Plans, schedules, coordinates and/or monitors final approval of products through the complete production cycle
- Works from engineering plans and production specifications to establish production schedules, labor loading, and capacity requirements
- Coordinates production plans to ensure materials are provided according to schedules
- Master Scheduler:
- Provides input to management; schedules and/or interfaces with marketing, sales, production and engineering managers
- Works to resolve (in case of design changes) labor and material shortages, backlogs and other potential schedule interruptions
- Oversees the master schedules and ensures comprehensive compliance with materials requirements for manufacturing
|
In your career, let’s prove what’s possible.
- Responsible for performing professional process engineering research, development and evaluation in semiconductor environment
- Reviews processing techniques and methods applied in the manufacture, fabrication and evaluation of products including in-house lab demonstrations
- Conceives and plans projects involving definition and selection of new concepts and approaches
- Works with customer and senior engineers cross functionally to understand roadmaps, process flow, inflection points, requirements and business issues/ challenges.
- Acts as customer technology manager in the planning, data collection, analysis and reporting
- Acts as single point of contact accountable for process related customer requests
- Drives introduction and evaluation of new technologies at customer sites including new tool qualification
|
In your career, let’s prove what’s possible.
- Responsible for providing quality on-site repair and maintenance service of complex electro-mechanical systems.
- Analytical troubleshooting of technical problems to component level.
- Performs complete installation/relocation start-up services
- Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions. Determine corrective actions as required.
- Installations and/or relocations of equipment at customers’ sites.
- Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials.
- Assist in complex field modifications and updates as released in Engineering Change Notifications.
- Maintain records and reports as required to properly coordinate activities with supervisors and customers.
- Planning, management, and execution of projects of a limited scope and duration
|
Vollzeit | Teilzeit | Freelancer, Projektarbeit
In your career, let’s prove what’s possible.
- Operational proficiency of clean processing equipment and wafer metrology tools
- Along with engineering team, prepare equipment and execute test plans
- Analyze and interpret data to draw inferences and make recommendations
- Perform baseline qualifications of lab tools, identify problems, and work with appropriate team to resolve issues
- Assist process engineers in execution, data collection and test reporting of customer demos
|
In your career, let’s prove what’s possible.
- Market Analysis and Forecasting: Develop and maintain forecast models for existing and new market segments. Maintain application matrix database.
- Market Strategy: Develop and execute product marketing strategies to drive awareness, demand, and adoption of Lam’s products. Collaborate with cross-functional teams to align marketing efforts with business goals.
- Product Positioning: Craft compelling product narratives, positioning, and messaging. Understand customer needs, competitive landscape, and industry trends to create impactful marketing content.
- Customer Insights: Gather insights from customers, sales teams, product line teams and market research. Use data to refine marketing strategies and improve product positioning.
- Collaboration: Work closely with product management, business development, account technologist, engineering, and sales teams. Be the bridge between technical details and customer benefits.
|
|
|
In your career, let’s prove what’s possible.
- Drives new mechanical developments in concept and feasibility state referring to fundamental new approaches for future applications with special focus on heating technologies.
- Involves problem-solving, creativity, and collaboration with other specialists to bring ideas from concept to reality.
- Prepares high-quality reports and technical presentations to clearly communicate design intent, evaluation, and validation to a diverse audience in design reviews.
- Collaborates with suppliers and internal teams to ensure solutions can be manufactured with high-quality, cost-optimized, and to requirements.
- Provides technical guidance and mentoring to more junior engineers.
- Accountable that system meets all engineering requirements regarding Compliance and Safety Standards.
|
Vollzeit | Leasing, Zeitarbeit
In your career, let’s prove what’s possible.
- Effectively read and follow work instructions for proper product assembly
- Create Problem Reports (PRs) and inspection instructions; work closely with engineers to resolve issues related to new product introduction such as manufacturability and form, fit, and function for future builds
- May troubleshoot moderate to highly complex mechanical and software issues within an assembly manufacturing environment
- Perform Risk Management By Walking Around (RMBWA) inspections and document, correct, and/or escalate safety issues/hazards to appropriate individuals/departments
- Effectively work on a team in a fast paced, time-sensitive environment Maintain a clean and organized workspace
- Able to work up to 12 hour shifts in a clean room environment wearing PPE (bunny suit, safety glasses, masks, shields, gloves, safety footwear)
- Consistently demonstrate ability to be flexible and responsive to changing priorities (ex., rework, overtime)
- Willing and able to install components from a working height between 12”-71” and reach into machines to perform tasks
|
In your career, let’s prove what’s possible.
- Develop inspection techniques and metrology recipes supporting the data generation andanalysis for the customer demo support.
- Independently design and conduct experiments, developing tailored analytical methodologies, supporting product development’s engineering testing.
- Plan, carry and oversee complex metrology related projects, documenting results and lessonslearned in BKM.
- Analyze the metrology equipment’s performance and partner with the suppliers on problemsolving and CIP.
- Schedule and organize the needed preventive maintenances and calibrations.
- Support the development of the site’s metrology roadmap, identifying current gaps through the cooperation with the engineering teams, align on the future technical requirements, and setup the implementation strategies.
- Engage with analytical laboratories and wafers suppliers to extend the available engineering testing offer.
|
In your career, let’s prove what’s possible.
- Develop and maintain factory capacity models, labor forecasts, and resource planning scenarios
- Perform data-driven analysis to identify bottlenecks and capacity constraints
- Prepare reports and recommendations for site and global stakeholders
|
In your career, let’s prove what’s possible.
- Designs, develops, and implements cost-efficient methods to test and troubleshoot systemsand equipment for all phases of product development and manufacturing.
- Prepares test and diagnostic programs, designs test fixtures and equipment, and documentsspecifications and procedures for new products.
- Plans labor, cost, timeline, and equipment required for testing
- Managing of work packages for Lam internal and external resources, who supports with testfixture design and Python coding
- Transfer test fixtures to suppliers (including traveling and training)
- Off- and On-side support for supplier
- Support Manufacturing Engineering activities like assembly instruction creation, BOM andassembly verification for specific programs
- Implement new ideas and defining new ways of testing to reduce costs and test time
|
In your career, let’s prove what’s possible.
- Customer Relationship Management:
Develop and maintain strong relationships with key accounts,acting as the primary technical point of contact. - Priority Alignment:
Drive alignment between account teams and clean product line on priorities formarket penetrations and defenses. - Process Optimization:
Collaborate with customers to optimize semiconductor manufacturing processes,ensuring the highest levels of efficiency and performance. - Product Demonstrations:
Organize product demonstrations and presentations to showcasethecapabilities and benefits of Lam Research technologies. - Feedback Loop:
Gather and relay customer feedback to internal teams to drive continuousimprovementand innovation in our products and services. - Training and Education:
Provide training and educational resources to customers and account teams toenhance their understanding and utilization of Lam Research technologies. - Cross-Functional Collaboration:
Work closely with sales, engineering, and product development teamsto align customer needs with company objectives.
|
In your career, let’s prove what’s possible.
- Design, develop, troubleshoot, and debug software programs for enhancements and new products.
- Implement new customer requirements and features in our existing application.
- Maintain and enhance existing code base by investigating and resolving problem areas.
- Demonstrate solutions through clear documentation, flowcharts, and well-structured code.
- Collaborate with cross functional teams to design and develop software programs.
- May visit customer site to provide support and have ability to travel (total is less than 10%).
|
In your career, let’s prove what’s possible.
- Customer Technical Review Meetings (TRMs):
Travel to customer locations to provide updates on Lam clean technology developments and to better understand the customer’s technology roadmap and clean specific challenges. - Market Strategy: Define market strategies and drive alignment between account teams and clean product line on priorities for market penetrations and defenses.
- Product Demonstrations: Organize product demonstrations and presentations to show case the capabilities and benefits of Lam Research technologies.
- Feedback Loop: Gather and relay customer feedback to internal teams to drive continuous improvement and innovation in our products and services.
- Training and Education: Provide training and educational resources to customers and account teams to enhance their understanding and utilization of Lam Research technologies.
- Cross-Functional Collaboration: Serve as the clean single point of contact for account teams while serving as the voice of the customer while working with product line teams such as engineering, product management, business development and sales operations.
|
In your career, let’s prove what’s possible.
- Design and implement enterprise observability strategies across cloud, infrastructure, applications, and platforms.
- Build telemetry pipelines that ingest logs, metrics, traces, events, and topology information.
- Deploy and tune observability platforms to improve operational visibility and service reliability.
- Develop AIOps capabilities including anomaly detection, event correlation, noise reduction, and predictive insights.
- Partner with SRE, platform engineering, cybersecurity, and service operations teams to identify key operational signals.
- Create dashboards, service maps, operational scorecards, and SLO-driven reporting.
- Integrate observability data into AI agents, automation workflows, and operational platforms.
- Establish telemetry standards and observability engineering best practices.
- Drive continuous improvements in MTTD, MTTR, and service health monitoring.
|
In your career, let’s prove what’s possible.
- Lead the design and implementation of Lam's Agent Platform and Internal Developer Platform.
- Build and operate the cloud-native infrastructure supporting AI agents and automation services.
- Establish platform engineering standards, reusable templates, golden paths, and self-service capabilities.
- Implement GitOps, Infrastructure as Code, policy-as-code, and secure software delivery practices.
- Design deployment pipelines, observability standards, operational controls, and runtime governance.
- Partner with architects, SRE teams, and application teams to onboard services onto the platform.
- Define scalability, reliability, and resiliency requirements for enterprise automation workloads.
- Drive adoption of cloud-native engineering practices across the organization.
- Mentor engineers and build platform engineering excellence.
|
