In your career, let’s prove what’s possible.
- Allgemeine Lagertätigkeiten
- Ausführung physischer Aufgaben in Verbindung mit der Einlagerung, Kommissionierung und Verteilung von Waren
- Heben von schweren Gegenständen (bis zu 15 kg) und Bedienung eines Gabelstapler
|
In your career, let’s prove what’s possible.
- Accountable for development, verification and documentation of fluid delivery systems to meet the systems specifications
- Provides concepts and technical designs for chemical fluid systems based on modeling & calculation data
- Accountable that system meets all engineering requirements regarding Compliance and Safety Standards
- Clarification of fluid delivery requirements
- Owns execution of BOM and documentation release plan
- Technical response to meet all interface requirements with other modules and environment
- Prepare all required deliverables based on product development plan (e.g. FMEA, technical specifications, risk analyses)
- Close relationship to our suppliers and internal department to ensure that we receive high quality-, well Performs engineering data analysis of mechanical and electrical aspects of the system by using of appropriate methods
|
In your career, let’s prove what’s possible.
- be involved in all phases of the software development (SW) lifecycle, including the testing, analysis and maintenance of the software system
- participate in the SW deployment process ensuring qualified Software Products are successfully installed at our customer's facilities
- perform troubleshooting of system software related issues
- perform in-house & onsite support of customer install base and resolution of customer issues
- test, troubleshoot and propagate errors clearly to SW and HW Development Engineers
- setup and maintain tool simulators, testing environments, lab support to reproduce issues found in field and verify SW solutions
- understand customer technology & productivity needs and feedback those requirements into software development
- prepare presentations to Lam internal stakeholders and customers
- travel worldwide wherever semiconductor customers are located (up to 25%)
|
In your career, let’s prove what’s possible.
- Develop inspection techniques and metrology recipes supporting the data generation andanalysis for the customer demo support.
- Independently design and conduct experiments, developing tailored analytical methodologies,supporting product development’s engineering testing.
- Plan, carry and oversee complex metrology related projects, documenting results and lessonslearned in BKM.
- Analyze the metrology equipment’s performances and partner with the suppliers on problemsolving and CIP.
- Schedule and organize the needed preventive maintenances and calibrations.
- Support the development of the site’s metrology roadmap, identifying current gaps through thecooperation with the engineering teams, align on the future technical requirements, and setupthe implementation strategies.
- Engage with analytical laboratories and wafers suppliers to extend the available engineeringtesting offer.
|
In your career, let’s prove what’s possible.
- Assembly and Test Pilot product and modules in high quality
- Working on newest products and design and get them ready for production
- Work together with colleagues in pilot production area in several areas (mechanical, electrical, chemical or testing area)
- Supporting assembly and documentation of test fixtures and other assemblies
- Reporting issues and drive improvements and new ideas to improve efficiency
|
In your career, let’s prove what’s possible.
- Act as a quality interface between product development and release program (PDR) and the quality install base team.
- Prevent quality escapes upfront in the early product development stage, by using adequate quality methods and by driving lessons learned form the Install base quality into the development programs.
- Actively monitor and analyse quality performance of alpha and beta stage products and resolve quality issues via systematic root cause and corrective actions prior the release of the products to high volume manufacturing (HVM).
- Bridge quality performance to financial impact (Cost of Quality) and the quality development activities.
- Act as a quality mentor for quality case owners (QCOs)
|
In your career, let’s prove what’s possible.
- Work with our instructional designers and semiconductor equipment subject-matter experts to develop accurate and scalable mixed reality training scenarios
- Work with industry-standard software toolsets to develop scalable, VR-ready 3D CAD models based on our internal CAD equipment models
- Develop a successful and obtainable workflow from the CAD environment to the final VR-based project
- Assist with annual updates to existing VR modules to ensure accuracy
- Establish and maintain a library of VR-ready models and re-usable VR-specific code and scenes
- Establish recommended mixed reality toolsets and best-known methods for future-proofing our development efforts
- Troubleshoot VR hardware/software end-user issues both remotely and in the classroom
- Provide guidance and training to other internal VR developers
|
In your career, let’s prove what’s possible.
- Customer Relationship Management: Develop and maintain strong relationships with key accounts, acting as the primary technical point of contact.
- Priority Alignment: Drive alignment between account teams and clean product line on priorities for market penetrations and defenses.
- Process Optimization: Collaborate with customers to optimize semiconductor manufacturing processes, ensuring the highest levels of efficiency and performance.
- Product Demonstrations: Organize product demonstrations and presentations to showcasethe capabilities and benefits of Lam Research technologies.
- Feedback Loop: Gather and relay customer feedback to internal teams to drive continuousimprovement and innovation in our products and services.
- Training and Education: Provide training and educational resources to customers and account teams to enhance their understanding and utilization of Lam Research technologies.
- Cross-Functional Collaboration: Work closely with sales, engineering, and product development teams to align customer needs with company objectives.
|
In your career, let’s prove what’s possible.
- Ensure OT projects are delivered on time and within budget, minimizing any impact on OT environments.
- Act as a liaison between engineering and manufacturing OT business units, providing guidance on BU projects and ensuring adherence to Lam OT Standards and procedures.
- Participate in global OT alignment meetings.
- Collaborate with both engineering and manufacturing teams to address IT-related issues that affect production.- Implement and maintain IT solutions to enhance manufacturing efficiency and quality control.
- Implement and maintain IT solutions to enhance engineering efficiency and quality control.- Ensure the security and reliability of all OT systems, including backups and disaster recovery plans.
|
In your career, let’s prove what’s possible.
- Design, develop, troubleshoot, and debug software programs for our industrial machine controls applications.
- Write efficient, reliable code in C/C++ for computer devices, as well as interfaces, ensuring functionality and stability.
- Create, optimize, and integrate drivers for peripherals and interfaces like sensors, actuators, and communication modules.
- Analyze and optimize code for memory constraints, performance, and power consumption in embedded environments.
- Ensure maintainability of our first-class codebase through regular peer reviews, testing, and documentation.
- Conduct unit and functional testing, debugging, and troubleshooting of our controls software applications to ensure functionality and stability.
- Collaborate with hardware engineers to integrate software with hardware components and systems.
- Stay updated with industry trends, best practices, and emerging technologies in C++ programming for hardware equipment controls.
- Provide technical guidance and mentoring for junior engineers.
|
In your career, let’s prove what’s possible.
- Designs, develops and manages activities for a specific product or group of products from thebeginning to the end: product definition and planning through production, release, and end ofproduct-lif
- Technical counseling of internal teams on product design and configuration to accommodatecustomer requirements
- Serves as the central resource for Clean Tools with design, process, manufacturing, test,quality and marketing as the product(s) move to production and distribution
- Leads internal meetings and workshops with the product ownership-team and keeps themanagement informed about the results
- Involvement lasts throughout all stages of a product’s lifecycle including modifications,upgrades and maintenance of the product or product line
|
In your career, let’s prove what’s possible.
- Collaboratively engineer innovative semiconductor equipment and process design solutions to quickly resolve customer issues and improve product quality in a dynamic fast-paced challenging environment.
- Supports product development from product prototyping, development, deployment/product release, and initial field support.
- Design and conduct experiments, tests, and prototypes to resolve complex technical problems.
- Present analysis and support technical recommendations clearly and concisely.
- Collaborate with cross-functional and cross-cultural teams to guide the specification and development of products.
- Provides technical support for installation and/or diagnosing, troubleshooting, repairing, and debugging complex product issues.
- Maintain a high degree of customer engagement including face-to-face and international travel to customer sites supporting near term product releases and solve customer issues.
- Work in a cleanroom lab and/or customer semiconductor fab environment.
|
In your career, let’s prove what’s possible.
- Manages a group of program/project managers in business operations that support the Reliant Single Wafer Clean (SWC) product line, which is focused on Specialty Technologies and Advanced Packaging
- Manage order execution
- define and align technical requirements with Account Teams, Customers and Product Management
- coordinates customer hardware and technical specifications
- order change management
- escalation management
- Create spin clean configuration documents and Quotes
- Data maintenance in all relevant internal systems
- Create new Machine non standard requests (NSRs) and link them to the product configuration
- Optimize configurations to reduce product costs and maximize profitability
- Single point of contact and link between regional sales teams and factory for ordered systems
- Maintains relationship with field personnel to ensure timely, accurate, and prompt forecast submissions
- Cost analysis of shipped systems (calculation vs. actuals)
|
In your career, let’s prove what’s possible.
- Responsible for providing quality on-site repair and maintenance service of complex electro-mechanical systems. Analytical troubleshooting of technical problems to component level. Performs complete installation/relocation start-up services
- Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions. Determine corrective actions as required.
- Installations and/or relocations of equipment at customers’ sites.
- Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials.
- Assist in complex field modifications and updates as released in Engineering Change Notifications.
- Maintain records and reports as required to properly coordinate activities with supervisors and customers.
- Planning, management, and execution of projects of a limited scope and duration
|
In your career, let’s prove what’s possible.
- Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions. Determine corrective actions as required.
- Installations and/or relocations of equipment at customers’ sites.
- Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials.
- Assist in complex field modifications and updates as released in Engineering Change Notifications.
- Maintain records and reports as required to properly coordinate activities with supervisors and customers.
- Assist in the planning, management, and execution of projects of a limited scope and duration
- Providing high-quality on-site support for repair and maintenance service of complex electro-mechanical systems.
- Assists with the full installation and relocation processes, including system start-up services
|
In your career, let’s prove what’s possible.
- Is the lead engineer of a development program (product), making sure that mechanical and electrical hardware and the tool software work together to meet the system specification
- Owns developing the system specification based on the product specification and configuration options
- Is accountable for resolving design tradeoffs/conflicts to ensure the design is integrated, such that the overall product performs as described in the system specification
- Assures that the system meets engineering- and compliance standards, especially in the concept and detailed design phases
- Owns BOM (bill of material) setup and execution of the documentation release plan
- Prepares all required program/product related Engineering deliverables (e.g. FMEA, technical specifications, risk analyses)
- Technical responsible that all interfaces for the entire product are well defined and working
- Participates in the cost allocation model and assures that designs meet the cost targets
- Owns developing the reliability allocation model, the reliability design approach and test plans
|
In your career, let’s prove what’s possible.
- Lead process development projects for wet clean technologies used in semiconductor fabrication.
- Manage and mentor a team of process engineers and technicians.
- Design and execute experiments (DOE) to evaluate and optimize process parameters.
- Collaborate with hardware engineering, product marketing, and customer support teams to define and deliver integrated solutions.
- Analyze test data to identify trends, troubleshoot issues, and propose improvements.
- Interface with customers to support demos, qualifications, and technology transfers.
- Drive continuous improvement initiatives to enhance yield, reduce cost, and improve reliability.
- Present technical findings and strategic plans to senior leadership and external stakeholders.
|
In your career, let’s prove what’s possible.
- Implement new customer requirements and features in our existing application
- Maintain existing code base and investigating problem areas
- Demonstrating solutions by providing documentation, flowcharts, and clear code
- Working in cross functional teams throughout our organization
- Ability to travel within USA, Europe, and Asia (total is less than 10%)
|
In your career, let’s prove what’s possible.
- Troubleshooting and regular maintenance of the lab equipment
- Mechanical and electrical start-up of new lab tools
- Support the process engineers in executing the customer demonstrations
- Support product development by conducting design validation tests and delivering improvement proposals
- Documents the tools configuration and reports the tests results
- Support Lab facilities and willingness to support Lab On-Call team
|
In your career, let’s prove what’s possible.
- Assembly and Test Pilot product and modules in high quality
- Working on newest products and design and get them ready for production.
- Work together with colleagues in pilot production area in several areas (mechanical, electrical, chemical or testing area)
- Supporting assembly and documentation of test fixtures and other assemblies
- Reporting issues and drive improvements and new ideas to improve efficiency.
|
In your career, let’s prove what’s possible.
- Support the full life cycle of mechanical and electro-mechanical systems from concept to productization including conceptualization, designing, CAD modeling, development, and test/validation.
- Designs components using variety of metals, ceramics, quartz, plastics, and advanced coatings.
- Ensure documentation aligns with SEMI, Lam standards, and industry best practices for geometric dimensioning and tolerancing (GD&T).
- Conduct detailed analysis including structural, finite element analysis (FEA), thermal, heat transfer, stress, vibrations, fluid and gas flow dynamics, and manufacturability to properly specify designs.
- Develop and conduct feasibility studies and test plans to characterize and validate design performance.
- Prepare high-quality reports and technical presentations to clearly communicate design intent, evaluation, and validation to a diverse audience in design reviews.
- Collaborate with suppliers and internal teams to ensure solutions can be manufactured with high-quality, cost-optimized, and to requirements.
- Provide key deliverables including Failure Modes and Effects Analysis (FMEA), technical specifications, risk analysis, test specifications, and design review presentations.
- Provide technical guidance and mentoring to more junior engineers.
|
In your career, let’s prove what’s possible.
- You will be responsible for the design of new products and lifecycle management of existing electronic circuits.
- You will be responsible for component selection, design, development, testing and evaluation of control circuits for our machines.
- You will work with a multidisciplinary engineering design team: electrical, mechanical, software, technical support, productivity engineers, and suppliers, on the design, modification, of custom and OEM components.
- You will need to prepare and analyze test plans and procedures to assure that technical and operational requirements are met and properly demonstrated.
- You will be responsible for the collection and analysis of relevant material and data in preparation of your presentation at design, project, and program reviews.
|
In your career, let’s prove what’s possible.
- Accountable for development, verification and documentation of fluid delivery systems to meet the systems specifications
- Provides concepts and technical designs for chemical fluid systems based on modeling & calculation data
- Accountable that system meets all engineering requirements regarding Compliance and Safety Standards
- Clarification of fluid delivery requirements
- Owns execution of BOM and documentation release plan
- Technical response to meet all interface requirements with other modules and environment
- Prepare all required deliverables based on product development plan (e.g. FMEA, technical specifications, risk analyses)
- Close relationship to our suppliers an internal departments to ensure that we receive high quality-, well tested and cost saving solutions for our technical needs
- Performs engineering data analysis of mechanical and electrical aspects of the system by using of appropriate methods and tools (e.g. MATLAB, LabVIEW …)
|
In your career, let’s prove what’s possible.
- Drive new mechanical developments in concept and feasibility state referring to fundamental new approaches for future applications.
- Involve problem-solving, creativity, and collaboration with other specialists to bring ideas from concept to reality.
- Prepare high-quality reports and technical presentations to clearly communicate design intent, evaluation, and validation to a diverse audience in design reviews.
- Collaborate with suppliers and internal teams to ensure solutions can be manufactured with high-quality, cost-optimized, and to requirements.
- Provide technical guidance and mentoring to more junior engineers.
|
In your career, let’s prove what’s possible.
- Responsible for performing professional process engineering research, development and evaluation in semiconductor environment
- Reviews processing techniques and methods applied in the manufacture, fabrication and evaluation of products including in-house lab demonstrations
- Conceives and plans projects involving definition and selection of new concepts and approaches
- Works with customer and senior engineers cross functionally to understand roadmaps, process flow, inflection points, requirements and business issues/ challenges.
- May act as single point of contact accountable for process related customer requests
- Drives introduction and evaluation of new technologies at customer sites including new tool qualifications
|
In your career, let’s prove what’s possible.
- Representing Clean Supply Chain towards internal customers and suppliers
- Oversee material readiness from Remote Factories and is holding appropriate people accountable
- Oversee material readiness for Upgrades and Pilot Projects
- Execute annual operating plan requirements to support the factory interface team
- Participate in cross functional teams to identify material delivery risk to manufacturing
- Develop and monitors risk mitigation strategies, and coordinates root cause corrective actions and as well process improvements
- Develop timely reports and key performance indicators to identify/monitor material delivery challenges
- Oversee inventory allocation in a constraint environment: Ensures materials are ordered and in stock to meet company requirements, while maintaining acceptable inventory levels
- Communicate with different internal stakeholders in terms of Supply Chain abilities and risks
|
In your career, let’s prove what’s possible.
- Owns product line technical roadmap and strategic direction
- Delivers competitive and differentiated products and technologies
- Owns P&D execution, meeting customer commitments while ensures profitable products
- Accountable for profitability of the division
- Responsible for annual operational and capital planning for the product line
- Responsible for every aspect of organizational and people agenda for the product line
|
In your career, let’s prove what’s possible.
- Operate and maintain the lab chemistry delivery and safety systems in conformance with the company EH&S and local government requirements
- Scrubbers and chemicals waste neutralization system operation and maintenance e.g.: maintain pH calibrations, sensors and alarms, refilling of chemicals,...
- Installation and rework of the general lab facilities:
- Cooling water, DI-Water, chemical drains
- CDA, nitrogen, oxygen, CO2, vacuum
- Exhaust lines
- Electrical systems
- Waste management: arrange the chemical and hazardous house waste disposal
- Periodic coverage of facilities on-call duties
- Lab supplies management:
- Order and storage of chemistries and gases
- Order and storage of Wafers.
- Order, store and maintain the safety equipment and PPE
|
