Ihre Aufgaben:
Arbeiten im Bereich: Verpackung, Hygiene und Pharma Durchführung von Kostenanalysen bestehender Baugruppen und Entwicklung alternativer Lösungen Umsetzung von "Design to Cost" Prinzipien Mitwirkung an der Optimierung und Weiterentwicklung von Anlagen und Maschinen
|
In your career, let’s prove what’s possible.
- Assembly and Test Pilot product and modules in high quality
- Working on newest products and design and get them ready for production.
- Work together with colleagues in pilot production area in several areas (mechanical, electrical, chemical or testing area)
- Supporting assembly and documentation of test fixtures and other assemblies
- Reporting issues and drive improvements and new ideas to improve efficiency.
|
Vollzeit | befristet | Praktikum
In your career, let’s prove what’s possible.
- Support the Process Engineering Team for lab activities, analytical studies and research
- Perform fundamental studies to determine the most suited solution approaches
- Conduct experiments with wet chemicals in beaker and on system level
|
Vollzeit | befristet | Praktikum
In your career, let’s prove what’s possible.
- Analyze and test electrical related components and modules to establish operating data
- Define, set up and conduct experimental tests
- Generate or improve automated test environments
- Evaluate, document and present the test results
- Investigate and improve existing electrical modules and systems
|
Vollzeit | befristet | Praktikum
In your career, let’s prove what’s possible.
- Training Content (support evaluation of contents)
- Web-Based Training (create and update interactive trainings with Articulate Storyline)
- BKM Video creation
- Learning Management system (support of maintenance in LMS system)
- CIP Project Management Support
|
In your career, let’s prove what’s possible.
- Support Process Engineers in preparation for wafer fabrication equipment (WFE) tests, equipment setup, experiments, data collection, and sample submissions
- Operate processing equipment and advanced tools with recipes defined by process engineering teams to collect experiment results and to evaluate chemistry properties
- Process test runs and prepares records, charts, and schematics of results for presentation to engineering to identify yield optimization areas
- Provide technical assistance to process development teams and process engineers
- Assist in technical troubleshooting and improvement opportunities of the application lab tools and experiment setups
|
In your career, let’s prove what’s possible.
- You will be responsible for the design of new products and lifecycle management of existing electronic circuits.
- You will be responsible for component selection, design, development, testing and evaluation of control circuits for our machines.
- You will work with a multidisciplinary engineering design team: electrical, mechanical, software, technical support, productivity engineers, and suppliers, on the design, modification, of custom and OEM components.
- You will need to prepare and analyze test plans and procedures to assure that technical and operational requirements are met and properly demonstrated.
- You will be responsible for the collection and analysis of relevant material and data in preparation of your presentation at design, project, and program reviews.
|
In your career, let’s prove what’s possible.
|
In your career, let’s prove what’s possible.
- Accountable for development, verification and documentation of fluid delivery systems to meet the systems specifications
- Provides concepts and technical designs for chemical fluid systems based on modeling & calculation data
- Accountable that system meets all engineering requirements regarding Compliance and Safety Standards
- Clarification of fluid delivery requirements
- Owns execution of BOM and documentation release plan
- Technical response to meet all interface requirements with other modules and environment
- Prepare all required deliverables based on product development plan (e.g. FMEA, technical specifications, risk analyses)
- Close relationship to our suppliers an internal departments to ensure that we receive high quality-, well tested and cost saving solutions for our technical needs
- Performs engineering data analysis of mechanical and electrical aspects of the system by using of appropriate methods and tools (e.g. MATLAB, LabVIEW …
|
In your career, let’s prove what’s possible.
- Is the lead engineer of a development program (product), making sure that mechanical and electrical hardware and the tool software work together to meet the system specification
- Owns developing the system specification based on the product specification and configuration options
- Is accountable for resolving design tradeoffs/conflicts to ensure the design is integrated, such that the overall product performs as described in the system specification
- Assures that the system meets engineering- and compliance standards, especially in the concept and detailed design phases
- Owns BOM (bill of material) setup and execution of the documentation release plan
- Prepares all required program/product related Engineering deliverables (e.g. FMEA, technical specifications, risk analyses)
- Technical responsible that all interfaces for the entire product are well defined and working
- Participates in the cost allocation model and assures that designs meet the cost targets
- Owns developing the reliability allocation model, the reliability design approach and test plans
|
In your career, let’s prove what’s possible.
- Develop, improve, and standardize test methods and test fixtures for Lam products.
- Lead test fixture transitions to suppliers, including training, documentation, and on-site support when required.
- Own supplier test and facility readiness, including test reviews, sign-off activities, and risk assessment prior to Test fixture building and transitions.
- Coordinate test fixture duplication and rebuild efforts in close collaboration with Manufacturing Engineering and Supplier Test Technician teams.
- Provide remote and on-site support to suppliers during test-related line-down situations to ensure rapid issue resolution.
- Verify and set up duplicated test fixtures to ensure proper functionality and compliance with requirements.
- Maintain and update test documentation and test fixture Bills of Materials (BOMs) as required.
- Drive continuous yield, quality, and process improvements through test data analysis, root cause investigations, and corrective action implementation.
- Support the introduction of new products/components, design changes, or process updates by assessing test impact and readiness at supplier sites.
- Define and maintain supplier test best practices to ensure consistency across remote factories.
- Escalate unresolved or systemic issues to Leads, or Supervisors in a timely and structured manner.
- Perform system-level and component-level electrical and mechanical testing and troubleshooting.
- Utilize test and diagnostic equipment, including test programs, oscilloscopes, signal generators, and specialized test apparatus.
- Define and document test and diagnostic programs, including procedures to support testing of new components based on Non Standard Request or Change Orders.
- Design and develop cost-effective testing methods for systems and equipment throughout product development and manufacturing phases.
- Collaborate with the Manufacturing Engineering team, suppliers, account teams, and Supplier Engineering Technology (SET) members to ensure seamless integration and smooth transitions.
- Work with internal and external stakeholders to influence decisions and drive company objectives
|
In your career, let’s prove what’s possible.
- Responsible for performing professional process engineering research, development and evaluation in semiconductor environment
- Reviews processing techniques and methods applied in the manufacture, fabrication and evaluation of products including in-house lab demonstrations
- Conceives and plans projects involving definition and selection of new concepts and approaches
- Works with customer and senior engineers cross functionally to understand roadmaps, process flow, inflection points, requirements and business issues/ challenges.
- Acts as customer technology manager in the planning, data collection, analysis and reporting
- Acts as single point of contact accountable for process related customer requests
- Drives introduction and evaluation of new technologies at customer sites including new tool qualifications
|
Vollzeit | befristet | Praktikum
In your career, let’s prove what’s possible.
- Training Content (support evaluation of contents)
- Web-Based Training (create and update interactive trainings with Articulate Storyline)
- BKM Video creation
- Learning Management system (support of maintenance in LMS system)
- CIP Project Management Support
|
Vollzeit
Salzburg, Wernberg, Wien
09.04.2026
Salzburg, Wernberg, Wien
Wir sind das "I" und "T" in Retail...:
- Strategie & Weiterentwicklung: Aufbau und kontinuierliche Weiterentwicklung unserer GenAI-Strategie inkl. Priorisierung von Use Cases
- Integration von GenAI-Lösungen: Konzeption, Durchführung und Begleitung von POCs sowie technische und wirtschaftliche Bewertung
- Standards & Governance: Entwicklung von Leitlinien und Standards für den verantwortungsvollen Einsatz von AI
- Workshops & Enablement: Organisation und Durchführung von Workshops, Schulungen und Awareness-Formaten
- Community-Aufbau: Aufbau und Vernetzung einer unternehmensweiten GenAI-Community
- Technologie-Scouting: Beobachtung technologischer Trends und Evaluierung neuer Lösungen hinsichtlich Business Value
|
In your career, let’s prove what’s possible.
- Troubleshooting and regular maintenance of the lab equipment
- Mechanical and electrical start-up of new lab tools
- Support the process engineers in executing the customer demonstrations
- Support product development by conducting design validation tests and delivering improvement proposals
- Documents the tools configuration and reports the tests results
- Support Lab facilities and willingness to support Lab On-Call team
|
|
|
|
|
In your career, let’s prove what’s possible.
- Lead Lean 6 Sigma projects to increase efficiency (labor time, cycle time, bottleneck analysis).
- Train and coach employees (Yello/Green Belt) and enable them to implement the needed improvement.
- Benchmarking and best practice sharing with other sites.
- Enhancing and maintaining improvement platforms and delivering project presentations.
- Support and advise supervisors and managers in the CIP process.
- Coordinate with crossfunctional teams (Inudstrial Engineering, Quality, Manufacturing Engineering).
- Document and report improvement measures and project results.
- Cost calculation (ROI)
|
Vollzeit | Teilzeit | Praktikum
|
Vollzeit | befristet | Praktikum
In your career, let’s prove what’s possible.
- Assistance in electrical and mechanical assembly of control cabinets
- Assistance in troubleshooting
- Assisting the support processes in manufacturing
- Other Job Responsibilities
|
In your career, let’s prove what’s possible.
- Responsible for customer betas including installation, qualification, milestones, technical requirements, training and certification of local teams / customer
- Provides support to engineering and service products both at the factory and in the field
- Includes working in customer wafer fabrication sites / environments as required to fulfil the support function
- Creates and presents reports related to design, reliability, maintenance problems, SW bugs, projects and escalations to the relevant factory groups
- Creates and updates documentation for field service engineers and customers
- Support reported product issues by the field service engineers via problem reports
- Participates and leads as required Knowledge Management activities to share learning worldwide in order to expedite solutions, reduce repeat issues, escalations and improve cycle time closure
- Provides support to customer/users where the product is highly technical or sophisticated in nature
- Represents Lam by creating material and expertly presenting technical findings to the customer
- Can take place at the factory or in the field depending on the need
- Can include travel at short notice (24 hours)
|
In your career, let’s prove what’s possible.
- Customer Relationship Management:
Develop and maintain strong relationships with key accounts,acting as the primary technical point of contact. - Priority Alignment:
Drive alignment between account teams and clean product line on priorities formarket penetrations and defenses. - Process Optimization:
Collaborate with customers to optimize semiconductor manufacturing processes,ensuring the highest levels of efficiency and performance. - Product Demonstrations:
Organize product demonstrations and presentations to showcasethecapabilities and benefits of Lam Research technologies. - Feedback Loop:
Gather and relay customer feedback to internal teams to drive continuousimprovementand innovation in our products and services. - Training and Education:
Provide training and educational resources to customers and account teams toenhance their understanding and utilization of Lam Research technologies. - Cross-Functional Collaboration:
Work closely with sales, engineering, and product development teamsto align customer needs with company objectives.
|
In your career, let’s prove what’s possible.
- be involved in all phases of the software development (SW) lifecycle, including the testing, analysis and maintenance of the software system
- participate in the SW deployment process ensuring qualified Software Products are successfully installed at our customer's facilities
- perform troubleshooting of system software related issues
- perform in-house & onsite support of customer install base and resolution of customer issues
- test, troubleshoot and propagate errors clearly to SW and HW Development Engineers
- setup and maintain tool simulators, testing environments, lab support to reproduce issues found in field and verify SW solutions
- understand customer technology & productivity needs and feedback those requirements into software development
- prepare presentations to Lam internal stakeholders and customers
- travel worldwide wherever semiconductor customers are located (up to 25%)
|
In your career, let’s prove what’s possible.
- Customer Relationship Management: Develop and maintain strong relationships with key accounts, acting as the primary technical point of contact.
- Priority Alignment: Drive alignment between account teams and clean product line on priorities for market penetrations and defenses.
- Process Optimization: Collaborate with customers to optimize semiconductor manufacturing processes, ensuring the highest levels of efficiency and performance.
- Product Demonstrations: Organize product demonstrations and presentations to showcasethe capabilities and benefits of Lam Research technologies.
- Feedback Loop: Gather and relay customer feedback to internal teams to drive continuousimprovement and innovation in our products and services.
- Training and Education: Provide training and educational resources to customers and account teams to enhance their understanding and utilization of Lam Research technologies.
- Cross-Functional Collaboration: Work closely with sales, engineering, and product development teams to align customer needs with company objectives.
|
In your career, let’s prove what’s possible.
- Responsible for providing quality on-site repair and maintenance service of complex electro-mechanicalsystems. Analytical troubleshooting of technical problems to component level
- Performs complete installation/relocation start-up services
- Troubleshoots equipment problems and conduct diagnostic procedures to isolate problems and take stepsto minimize downtime or system interruptions and eliminate equipment malfunctions. Determine correctiveactions as required
- Performs installations and/or relocations of equipment at customers’ sites
- Remains up to date on equipment/tools through appropriate training, manuals, factory periodicals and otherrelevant materials
- Assists in complex field modifications and updates as released in Engineering Change Notifications
- Maintains records and reports as required to properly coordinate activities with supervisors and customers
- Responsible for Planning, management, and execution of projects of a limited scope and duration
- Coaches less experienced collegues within job scope
|
Vollzeit | befristet | Praktikum
|
In your career, let’s prove what’s possible.
- Develops, monitors and supports EHS functions to ensure compliance and continuous improvement. Works collaboratively with stakeholders, teammates, and other support resources.
- Leads projects to address EHS AOP objectives.
- Owns EHS programs that are subject to significant change, re-development, or improvement.
- Capable of motivating stakeholders to meet commitments towards EHS objectives.
- Capable of project planning, prioritization and achievement to goals and schedule.
- Makes interpretations to EHS regulations and protocols in alignment with EHS leadership.
- Decides and aligns on methods for implementing EHS initiatives and the parameters of those initiatives.
- Accountable to the objectives owned by the function and applicable area.
- Manages environmental permits for air, wastewater, stormwater, etc. manages reporting, permit compliance, and regulatory inspections.
- Manage the chemical safety and hygiene plan, including all aspects related to chemical management, chemical exposure monitoring, exposure threshold limit determinations, and risk / assessment mitigation.
|
In your career, let’s prove what’s possible.
- Act as an interface to the regional quality program leaders (QPLs) and the functional quality managers (FQMs) in a worldwide network
|
In your career, let’s prove what’s possible.
- As a Material Program Manager, you act as the interface between a cross-functional program team focusing on the introduction of new products and the Supply Chain Organization
- In this role, you are accountable for establishing a Supply Chain for Lam’s new products that meets performance, cost, quality, capacity, and on-time-delivery requirements
- By applying your great communication skills, you provide fact-based guidance to the cross-functional program team, supporting them to make the right decisions & the program to succeed
- Form & lead cross-functional teams to define sourcing strategies
- Proactively seek and maintain alignments with relevant stakeholders to support program needs and targets
- Execute new product’s cost analyses & cost tracking on a regular basis
- Identify, communicate and manage Supply Chain related program risks and prevent them from materializing
- Identify and execute material cost reduction opportunities utilizing should costing, benchmarking, cost driver analysis, functional cost analysis, etc.
- Provide recommendations for new supplier selection & evaluation
- Support our new products’ fast transition from Pilot to High Volume Manufacturing
- Identify critical path parts & implement measures enabling production to deliver to need date
- Present the status of your deliverables as well as continuous improvement activities in management reviews on a regular basis
|
In your career, let’s prove what’s possible.
- Enable predictable execution by providing a single, trusted plan of record that aligns demand, capacity, material readiness, and constraints across the global network
- Proactively protect delivery performance by identifying structural risks early and driving timely mitigation actions before they impact execution
- Improve capital and capacity efficiency through optimized site loading, volume and mix allocation, and disciplined trade‑off decisions
- Strengthen global planning maturity by driving standardization, governance, and rigor within the S&OP and planning processes
- Increase organizational confidence in the plan through data integrity, transparency, and clear rationale behind all Build Plan decisions
|
