Senior Scientist - Ion-trap chips (all genders)
- Establishment of infrastructure and set-ups for testing and operation of ion trap devices and development of ion trap systems for Quantum technology applications.
- Coordination and alignment of internal efforts and activities with industrial and academic partners in the pilot line.
- Contribution to design, simulation and characterization of new ion trap chips.
- Dissemination, communication and reporting of research findings to both scientific and non-scientific audiences.
- Supervision of students.
- Activities in relevant networks.
- Project management.
- Project and funding acquisition.
|
Senior Research Engineer – Nitride Thin-Film Materials (Wide Band Gap) (all genders)
- Development of thin films for piezoelectric and wide-band-gap applications.
- Design and execute experiments to optimize nitride thin film materials, guided by device specifications and performance feedback.
- Structural and functional (e.g. dielectric, electrical, ferroelectric) characterization of the deposited thin films.
- Collaboration with design, fabrication, characterization, and process engineer teams to optimize full process flow and device performance.
- Definition of strategies for material optimization and pursuing scientifically relevant investigations.
- Development of strategies to address novel material properties and novel fields of application.
- Contributing to the standardization of procedures and workflows within the Unit.
- Filing IP disclosures whenever possible and appropriate.
- Contribution to scientific dissemination (publications in high-impact peer-reviewed journals, presentations at conferences).
- Contribution to Unit workflows, project acquisition and project management.
- Position is offered within the Chips JU Pilot Lines.
|
R&D Process Engineer - Thin Film Deposition (all genders)
- Develop, monitor, and optimize thin film deposition processes (primarily sputtering) to support R&D and prototype fabrication.
- Maintain tool health and stability through performance tracking, SPC monitoring, and preventive maintenance coordination.
- Support researcher use of deposition tools, ensuring safe operation, consistent process quality, and compliance with FAB standards.
- Lead and assist in tool upgrades, process capability improvements, and new equipment evaluation or acquisition.
- Document process parameters, tool performance, and experiment outcomes to ensure traceability and knowledge sharing.
- Serve as the technical interface between the fabrication team and research groups to enable efficient process development and experimentation.
|
Plasma R&D Process Engineering - Dry Etch / PECVD (all genders)
- Develop, optimize, and sustain plasma etch (dry etch) & deposition (PECVD) processes to support diverse R&D flows.
- Establish stable, repeatable process baselines and maintain tight control through SPC and regular performance monitoring.
- Own and maintain plasma tools, ensuring high uptime and process consistency.
- Define and document process parameters, recipes, and best practices to ensure reproducibility across experiments and flows.
- Collaborate with the process engineering team members to ensure process compatibility across the full fabrication flow.
- Lead troubleshooting, root cause analysis and continuous improvement activities to maintain high process quality and tool uptime.
- Support tool upgrades, new equipment acquisition, and capability expansion projects.
|
In your career, let’s prove what’s possible.
- Review, analyze and process purchase requisitions
- Process purchase change orders and requests for quotes (RFQ's) to suppliers
- Manage purchase order releases daily to meet demand requirements
- Coordinate purchasing activities with manufacturing, planning and engineering departments to acquire inventory in a cost effective and timely manner
- Work with the suppliers on a daily basis to assure scheduled deliveries are met
- Understand, maintain weekly reports
- Develop and maintain key supplier relationships with day-to-day interface (peer level) to review open action items, suppliers performance to commitments of on time deliveries, future demand and future cost reductions forecasting
|
|
|
Vollzeit | befristet | Praktikum
|
|
|
Pilot Line PDK & Design Enablement Lead (all genders)
- PDK strategy & roadmap: define and maintain a consolidated PDK roadmap (priorities, maturity targets, releases) aligned with platform and fabrication evolution.
- PDK governance & release management: establish a structured release process (versioning, release notes, change control, qualification evidence, deprecation rules) and ensure predictable delivery for users.
- Design-to-fab interface: act as the interface between designers and fabrication teams to align layer definitions, design rules, tolerances, process assumptions, sign-off criteria, and handover packages.
- PDK content quality: own quality of PDK deliverables such as DRC/LVS/PEX flows (as applicable), models, corners/variability knobs, examples, and user documentation.
- Validation & calibration: coordinate validation and calibration plans with measurement/metrology and process teams; ensure model updates are evidence-based and traceable to wafer data.
- EDA and enablement flows: maintain compatibility with relevant EDA toolchains; provide reference flows, templates, and automation where beneficial (build/release tooling, regression checks).
- User support & enablement: support internal teams and selected external open-access users (onboarding, requirements clarification, feedback capture) and translate user needs into backlog items.
- Documentation & know-how management: ensure strong documentation discipline and coordinate what can be shared externally vs what must be protected, in collaboration with responsible functions.
|
Pilot Line PDK & Design Enablement Lead (all genders)
- Cross-platform process integration: maintain an end-to-end overview of process flows and module interfaces (e.g., thin films, lithography, etch, metrology closure) across integrated photonics, MEMS and related technology stacks.
- Baseline flows & readiness: define and maintain reference flows versus development lanes; support readiness reviews and ensure clear release criteria for stable execution.
- Process change control & documentation discipline: ensure recipe/version control, run cards, parameter windows, and structured documentation of decisions and learnings.
- Know-how capture: support structured capture of process know-how and clarify what can be shared externally vs protected, in collaboration with responsible functions.
- Traceability / data backbone: ensure wafer genealogy, run history, recipe versions, and measurement linkage are consistently captured to build a scalable single source of truth.
- Coordination interface: act as the key technical coordination contact with SAL MicroFab to align run readiness, documentation requirements, execution constraints, and release criteria (without owning MicroFab operations).
- Stability & continuous improvement: drive variability reduction and improvement loops (metrology closure, deviation handling, root-cause analysis) and feed improvements back into baseline flows and documentation.
- External request (open access): support business development and pilot-line teams by translating external requests into executable technical scopes (capability check, feasibility, assumptions/risks, measurement package, deliverables) and matching requests to the right platform capability.
|
|
|
R&D Process Engineer - Stepper-based Lithography (all genders)
- Develop, optimize, and maintain stepper-based lithography processes for a diverse multi-project R&D environment.
- Establish repeatable process baselines and maintain control through SPC and routine performance monitoring.
- Define and document process parameters, recipes, and SOPs to support repeatable user operation.
- Own stepper tool and periphery equipment, ensuring high uptime and consistent performance for multiple technologies and flows.
- Work closely with process engineers and users to ensure lithography compatibility across varied fabrication flows.
- Work closely with equipment maintenance engineers to ensure tool health.
- Lead hands-on troubleshooting, root cause analysis, and continuous improvement in a fast-changing R&D setting.
- Support tool upgrades, new installations, and capability expansion projects.
|
Semiconductor Equipment Engineer (all genders)
- Independently carrying out maintenance, troubleshooting, and servicing of high-end cleanroom equipment
- Planning and coordinating preventive and corrective maintenance activities on semiconductor tools
- Supporting the continuous improvement of maintenance processes and equipment reliability within the cleanroom environment
- Performing regular inspections of cleanroom facilities and infrastructure
- Assisting the cleanroom team with daily operational and technical tasks
- Preparing and maintaining technical documentation, maintenance records, and operating procedures
- Working closely with equipment suppliers and process engineers to improve tool performance and support advanced process development
- Coordinating service activities with external vendors as well as internal stakeholders
- Supporting organizational and administrative activities within the team to ensure smooth day-to-day operations
|
IHR BEITRAG ZU UNSEREM GEMEINSAMEN EROLG
-
Selbständiges Einrichten, Rüsten und Bedienen unserer Produktionsanlagen sowie aktive Überwachung und Kontrolle der Produktionsabläufe -
Durchführung von Programmkorrekturen und Anpassungen an der Maschinensteuerung -
Laufende Maß- und Qualitätsprüfungen während des Fertigungsprozesses -
Dokumentation produktionsrelevanter Daten -
Einhaltung von Sicherheits-, Qualitäts- und Umweltstandards
|
In your career, let’s prove what’s possible.
- Support the full life cycle of mechanical and electro-mechanical systems from concept to productization including conceptualization, designing, CAD modeling, development, and test/validation.
- Designs components using variety of metals, ceramics, quartz, plastics, and advanced coatings.
- Ensure documentation aligns with SEMI, Lam standards, and industry best practices for geometric dimensioning and tolerancing (GD&T).
- Conduct detailed analysis including structural, finite element analysis (FEA), thermal, heat transfer, stress, vibrations, fluid and gas flow dynamics, and manufacturability to properly specify designs.
- Develop and conduct feasibility studies and test plans to characterize and validate design performance.
- Prepare high-quality reports and technical presentations to clearly communicate design intent, evaluation, and validation to a diverse audience in design reviews.
- Collaborate with suppliers and internal teams to ensure solutions can be manufactured with high-quality, cost-optimized, and to requirements.
- Provide key deliverables including Failure Modes and Effects Analysis (FMEA), technical specifications, risk analysis, test specifications, and design review presentations.
- Provide technical guidance and mentoring to more junior engineers.
|
In your career, let’s prove what’s possible.
- Develop, verify, and document fluid delivery systems in accordance with system specifications, engineering standards, and product requirements.
- Create system architectures, technical concepts, and detailed designs based on engineering calculations, modeling, and simulation results.
- Clarify, define, and derive system requirements for new products, features, and technologies.
- Defining operational concepts such as functional and process descriptions (Theory of Operation) for software development.
- Perform engineering analyses of fluidic, mechanical, and electrical system aspects using appropriate methods and tools such as Python, MATLAB, LabVIEW, or comparable engineering software.
- Ensure compliance with all applicable safety, regulatory, and engineering standards through risk assessments, FMEA activities, and technical reviews.
- Own the execution of BOM management, documentation release plans, and required development deliverables throughout the product development process.
- Ensure successful integration of the system by driving technical alignment of interfaces with other modules, subsystems, and the operating environment
- Collaborate closely with suppliers and cross-functional teams to develop robust, high-quality, well-tested, and cost-effective solutions.
|
In your career, let’s prove what’s possible.
- Customer Relationship Management:
Develop and maintain strong relationships with key accounts,acting as the primary technical point of contact. - Priority Alignment:
Drive alignment between account teams and clean product line on priorities formarket penetrations and defenses. - Process Optimization:
Collaborate with customers to optimize semiconductor manufacturing processes,ensuring the highest levels of efficiency and performance. - Product Demonstrations:
Organize product demonstrations and presentations to showcasethecapabilities and benefits of Lam Research technologies. - Feedback Loop:
Gather and relay customer feedback to internal teams to drive continuousimprovementand innovation in our products and services. - Training and Education:
Provide training and educational resources to customers and account teams toenhance their understanding and utilization of Lam Research technologies. - Cross-Functional Collaboration:
Work closely with sales, engineering, and product development teamsto align customer needs with company objectives.
|
Vollzeit | Leasing, Zeitarbeit
In your career, let’s prove what’s possible.
- Effectively read and follow work instructions for proper product assembly
- Create Problem Reports (PRs) and inspection instructions; work closely with engineers to resolve issues related to new product introduction such as manufacturability and form, fit, and function for future builds
- May troubleshoot moderate to highly complex mechanical and software issues within an assembly manufacturing environment
- Perform Risk Management By Walking Around (RMBWA) inspections and document, correct, and/or escalate safety issues/hazards to appropriate individuals/departments
- Effectively work on a team in a fast paced, time-sensitive environment Maintain a clean and organized workspace
- Able to work up to 12 hour shifts in a clean room environment wearing PPE (bunny suit, safety glasses, masks, shields, gloves, safety footwear)
- Consistently demonstrate ability to be flexible and responsive to changing priorities (ex., rework, overtime)
- Willing and able to install components from a working height between 12”-71” and reach into machines to perform tasks
|
Vollzeit | Teilzeit | Freelancer, Projektarbeit
In your career, let’s prove what’s possible.
- Operational proficiency of clean processing equipment and wafer metrology tools
- Along with engineering team, prepare equipment and execute test plans
- Analyze and interpret data to draw inferences and make recommendations
- Perform baseline qualifications of lab tools, identify problems, and work with appropriate team to resolve issues
- Assist process engineers in execution, data collection and test reporting of customer demos
|
In your career, let’s prove what’s possible.
- Eigenverantwortliche Durchführung der Gehaltsabrechnung für sämtliche MitarbeiterInnen des Konzerns in Österreich
- Administrative Tätigkeiten rund um die Gehaltsabrechnung inklusive pflege des Zeitsystems in Zusammenarbeit mit einer weiteren Kollegin
- Sozialversicherungsrechtliche und steuerrechtliche Administration der Ein- und Austritte
- Bescheinigungs- und Meldewesen sowie die Korrespondenz mit Behörden, Ämtern und Krankenkassen
- Erstellen div. Meldungen und Bestätigungen für Sozialversicherungsanstalten, Finanzbehörden und sonstige Institutionen
- Beratung und Bearbeitung von Auskünften an interne und externe Stellen
- Überwachung von Bezugsverrechnungsschnittstellen
- Erstellen von Auswertungen und Statistiken sowie Stammdatenpflege
- Mitarbeit an internen zukunftsorientierten Projekten in enger Zusammenarbeit mit anderen Abteilungen sowie aktive Rolle bei Prozessoptimierungen im Verantwortungsbereich
|
In your career, let’s prove what’s possible.
- Develop and maintain factory capacity models, labor forecasts, and resource planning scenarios
- Perform data-driven analysis to identify bottlenecks and capacity constraints
- Prepare reports and recommendations for site and global stakeholders
|
In your career, let’s prove what’s possible.
|
In your career, let’s prove what’s possible.
- Provide service, maintenance, and repair support for advanced high-tech equipment at customer sites.
- Troubleshoot technical issues and identify root causes of equipment failures.
- Install, start up, and relocate equipment when required.
- Perform diagnostics and implement solutions to minimize downtime.
- Support equipment upgrades and engineering changes.
- Read and work with electrical and mechanical drawings, diagrams, and manuals.
- Maintain accurate service and project documentation.
- Collaborate with customers and internal teams to ensure excellent service.
- Support and execute smaller technical projects and gradually take ownership of more complex tasks.
|
Vollzeit | Teilzeit | Praktikum
|
Vollzeit | Leasing, Zeitarbeit
In your career, let’s prove what’s possible.
- Support the full life cycle of mechanical and electro-mechanical systems from concept to productizationincluding conceptualization, designing, CAD modeling, development, and test/validation.
- Designs components using variety of metals, ceramics, quartz, plastics, and advanced coatings.
- Ensure documentation aligns with SEMI, Lam standards, and industry best practices for geometricdimensioning and tolerancing (GD&T).
- Conduct detailed analysis including structural, finite element analysis (FEA), thermal, heat transfer, stress,vibrations, fluid and gas flow dynamics, and manufacturability to properly specify designs.
- Conduct feasibility studies and test plans to characterize and validate design performance.
- Prepare high-quality reports and technical presentations to clearly communicate design intent, evaluationand validation to a diverse audience in design reviews.
- Collaborate with suppliers and internal teams to ensure solutions can be manufactured with high-quality,cost-optimized, and to requirements.
- Provide key deliverables including Failure Modes and Effects Analysis (FMEA), technical specifications,risk analysis, test specifications, and design review presentations
|
AUFGABENÜBERSICHT IM DETAIL:
- Verbuchung der laufenden Geschäftsfälle
- Abwicklung des Zahlungsverkehrs und Kontenpflege
- Erstellung von den monatlichen Steuererklärungen und Meldungen (Umsatzsteuervoranmeldung, Zusammenfassende Meldung) für die Länder Österreich, Deutschland, Slowakei
- Mahnwesen
- Erstellung von Statistiken und Auswertungen
- Fachlicher Ansprechpartner für die Kollegen
- Weiterentwicklung interner Prozesse sowie interner Systeme, z.B. Buchungsrichtlinien, Schulung von Mitarbeitern anderer Abteilungen, Digitalisierung
- Datenaufbereitung für die Lohnverrechnung, Erstellung von Dienstverträgen Kreditoren- und Debitorenmanagement inkl. Stammdatenverwaltung Mitarbeit bei der Erstellung von Quartalsabschlüssen
- Ansprechpartner für Finanzbehörden, Wirtschaftsprüfer, Steuerberater und Banken
- Mithilfe bei der Erstellung des Jahresabschlusses nach UGB
- Kontrolle von Import- und Exportdokumenten
|
In your career, let’s prove what’s possible.
- Responsible for providing quality on-site repair and maintenance service of complex electro-mechanical systems.
- Analytical troubleshooting of technical problems to component level.
- Performs complete installation/relocation start-up services
- Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions. Determine corrective actions as required.
- Installations and/or relocations of equipment at customers’ sites.
- Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials.
- Assist in complex field modifications and updates as released in Engineering Change Notifications.
- Maintain records and reports as required to properly coordinate activities with supervisors and customers.
- Planning, management, and execution of projects of a limited scope and duration
|
In your career, let’s prove what’s possible.
- Responsible for performing professional process engineering research, development and evaluation in semiconductor environment
- Reviews processing techniques and methods applied in the manufacture, fabrication and evaluation of products including in-house lab demonstrations
- Conceives and plans projects involving definition and selection of new concepts and approaches
- Works with customer and senior engineers cross functionally to understand roadmaps, process flow, inflection points, requirements and business issues/ challenges.
- Acts as customer technology manager in the planning, data collection, analysis and reporting
- Acts as single point of contact accountable for process related customer requests
- Drives introduction and evaluation of new technologies at customer sites including new tool qualification
|
In your career, let’s prove what’s possible.
- Act as the local compliance lead for the Villach site, with focus on ISO 9001 requirements, Lam corporate policies, and global business processes.
- Maintain and continuously improve the Villach site accountability system in alignment with Lam’s Annual Operations Plan.
- Coordinate cross-functional objective setting, performance tracking, and accountability reviews, including Quarterly Operations Reviews.
- Lead and coordinate ISO 9001 and customer audits for the Villach site in close cooperation with Lam’s global Compliance organization.
- Drive corrective actions and continuous improvement initiatives related to audit findings, process gaps, and management-system nonconformities.
- Facilitate alignment across organizations and functions to ensure clear ownership, timely execution, and measurable progress against site objectives.
- Prepare and communicate performance insights, audit readiness status, and improvement opportunities to local and global leadership teams.
|
|
|
