|
|
|
|
befristet | Leasing, Zeitarbeit
|
Vollzeit
Villach, Pavia
28.08.2026
Villach, Pavia
|
Vollzeit
Villach, Padua
10.09.2026
Villach, Padua
|
|
|
In your career, let’s prove what’s possible.
- Drives new mechanical developments in concept and feasibility state referring to fundamental new approaches for future applications with special focus on heating technologies.
- Involves problem-solving, creativity, and collaboration with other specialists to bring ideas from concept to reality.
- Prepares high-quality reports and technical presentations to clearly communicate design intent, evaluation, and validation to a diverse audience in design reviews.
- Collaborates with suppliers and internal teams to ensure solutions can be manufactured with high-quality, cost-optimized, and to requirements.
- Provides technical guidance and mentoring to more junior engineers.
- Accountable that system meets all engineering requirements regarding Compliance and Safety Standards.
|
Vollzeit | Leasing, Zeitarbeit
In your career, let’s prove what’s possible.
- Support the full life cycle of mechanical and electro-mechanical systems from concept to productizationincluding conceptualization, designing, CAD modeling, development, and test/validation.
- Designs components using variety of metals, ceramics, quartz, plastics, and advanced coatings.
- Ensure documentation aligns with SEMI, Lam standards, and industry best practices for geometricdimensioning and tolerancing (GD&T).
- Conduct detailed analysis including structural, finite element analysis (FEA), thermal, heat transfer, stress,vibrations, fluid and gas flow dynamics, and manufacturability to properly specify designs.
- Conduct feasibility studies and test plans to characterize and validate design performance.
- Prepare high-quality reports and technical presentations to clearly communicate design intent, evaluationand validation to a diverse audience in design reviews.
- Collaborate with suppliers and internal teams to ensure solutions can be manufactured with high-quality,cost-optimized, and to requirements.
- Provide key deliverables including Failure Modes and Effects Analysis (FMEA), technical specifications,risk analysis, test specifications, and design review presentations
|
In your career, let’s prove what’s possible.
- Design, develop, troubleshoot, and debug software programs for enhancements and new products.
- Implement new customer requirements and features in our existing application.
- Maintain and enhance existing code base by investigating and resolving problem areas.
- Demonstrate solutions through clear documentation, flowcharts, and well-structured code.
- Collaborate with cross functional teams to design and develop software programs.
- May visit customer site to provide support and have ability to travel (total is less than 10%).
|
In your career, let’s prove what’s possible.
- Support the full life cycle of mechanical and electro-mechanical systems from concept to productization including conceptualization, designing, CAD modeling, development, and test/validation.
- Designs components using variety of metals, ceramics, quartz, plastics, and advanced coatings.
- Ensure documentation aligns with SEMI, Lam standards, and industry best practices for geometric dimensioning and tolerancing (GD&T).
- Conduct detailed analysis including structural, finite element analysis (FEA), thermal, heat transfer, stress, vibrations, fluid and gas flow dynamics, and manufacturability to properly specify designs.
- Develop and conduct feasibility studies and test plans to characterize and validate design performance.
- Prepare high-quality reports and technical presentations to clearly communicate design intent, evaluation, and validation to a diverse audience in design reviews.
- Collaborate with suppliers and internal teams to ensure solutions can be manufactured with high-quality, cost-optimized, and to requirements.
- Provide key deliverables including Failure Modes and Effects Analysis (FMEA), technical specifications, risk analysis, test specifications, and design review presentations.
- Provide technical guidance and mentoring to more junior engineers.
|
|
|
Pilot Line PDK & Design Enablement Lead (all genders)
- PDK strategy & roadmap: define and maintain a consolidated PDK roadmap (priorities, maturity targets, releases) aligned with platform and fabrication evolution.
- PDK governance & release management: establish a structured release process (versioning, release notes, change control, qualification evidence, deprecation rules) and ensure predictable delivery for users.
- Design-to-fab interface: act as the interface between designers and fabrication teams to align layer definitions, design rules, tolerances, process assumptions, sign-off criteria, and handover packages.
- PDK content quality: own quality of PDK deliverables such as DRC/LVS/PEX flows (as applicable), models, corners/variability knobs, examples, and user documentation.
- Validation & calibration: coordinate validation and calibration plans with measurement/metrology and process teams; ensure model updates are evidence-based and traceable to wafer data.
- EDA and enablement flows: maintain compatibility with relevant EDA toolchains; provide reference flows, templates, and automation where beneficial (build/release tooling, regression checks).
- User support & enablement: support internal teams and selected external open-access users (onboarding, requirements clarification, feedback capture) and translate user needs into backlog items.
- Documentation & know-how management: ensure strong documentation discipline and coordinate what can be shared externally vs what must be protected, in collaboration with responsible functions.
|
Teilzeit | befristet | Praktikum
|
Vollzeit
Villach, Pavia
26.08.2026
Villach, Pavia
|
|
|
Vollzeit | Teilzeit | Praktikum
|
|
|
In your career, let’s prove what’s possible.
- Design, develop, and maintain electrical and electronic circuits throughout all phases of the product lifecycle.
- Drive component selection, circuit development, design verification, testing, and evaluation of control systems for our products.
- Collaborate closely with a multidisciplinary engineering team, including electrical, mechanical, and software engineers, technical support specialists, productivity engineers, and external suppliers, to design, develop, and enhance custom and OEM components.
- Develop, execute, and analyze test plans and procedures to ensure technical and operational requirements are fully met, validated, and documented.
- Collect, evaluate, and present technical data and findings to support informed decision-making during design, project, and program reviews.
|
|
|
In your career, let’s prove what’s possible.
- Develop and maintain factory capacity models, labor forecasts, and resource planning scenarios
- Perform data-driven analysis to identify bottlenecks and capacity constraints
- Prepare reports and recommendations for site and global stakeholders
|
Vollzeit | Teilzeit | Praktikum
|
In your career, let’s prove what’s possible.
- Perform testing, check-out, and troubleshooting using schematics, diagrams, descriptions, layouts, or defined plans.
- Tests and troubleshoots system level and component level problems in electrical and mechanical systems and sub-systems.
- Inspect materials, components, or products for surface defects and measure circuitry, using electronic test equipment, precision measuring instruments, microscope, and standard procedures.
- Conduct operational test and fault isolation on systems and equipment, help in determining methods or actions to remedy malfunctions.
- Support the design, construction, test, and check-out of test equipment.
- Use test and diagnostic equipment, including test programs, oscilloscopes, signal generators and specialized test apparatus.
- Collaborates with development engineers conducting engineering tests to collect design data or support in research efforts.
|
|
|
In your career, let’s prove what’s possible.
- Designs, develops, and implements cost-efficient methods to test and troubleshoot systemsand equipment for all phases of product development and manufacturing.
- Prepares test and diagnostic programs, designs test fixtures and equipment, and documentsspecifications and procedures for new products.
- Plans labor, cost, timeline, and equipment required for testing
- Managing of work packages for Lam internal and external resources, who supports with testfixture design and Python coding
- Transfer test fixtures to suppliers (including traveling and training)
- Off- and On-side support for supplier
- Support Manufacturing Engineering activities like assembly instruction creation, BOM andassembly verification for specific programs
- Implement new ideas and defining new ways of testing to reduce costs and test time
|
Vollzeit
Porto, Klagenfurt, Villach, München
30.08.2026
Porto, Klagenfurt, Villach, München
|
In your career, let’s prove what’s possible.
- Responsible for performing professional process engineering research, development and evaluation in semiconductor environment
- Reviews processing techniques and methods applied in the manufacture, fabrication and evaluation of products including in-house lab demonstrations
- Conceives and plans projects involving definition and selection of new concepts and approaches
- Works with customer and senior engineers cross functionally to understand roadmaps, process flow, inflection points, requirements and business issues/ challenges.
- Acts as customer technology manager in the planning, data collection, analysis and reporting
- Acts as single point of contact accountable for process related customer requests
- Drives introduction and evaluation of new technologies at customer sites including new tool qualification
|
Wir freuen uns auf Deine Bewerbung!
‘s Fachl Villach
ATRIO, Kärntner Straße 34, 9500 Villach
Nikki Grün
nikki@fachl.at
|
Senior Research Engineer – Nitride Thin-Film Materials (Wide Band Gap) (all genders)
- Development of thin films for piezoelectric and wide-band-gap applications.
- Design and execute experiments to optimize nitride thin film materials, guided by device specifications and performance feedback.
- Structural and functional (e.g. dielectric, electrical, ferroelectric) characterization of the deposited thin films.
- Collaboration with design, fabrication, characterization, and process engineer teams to optimize full process flow and device performance.
- Definition of strategies for material optimization and pursuing scientifically relevant investigations.
- Development of strategies to address novel material properties and novel fields of application.
- Contributing to the standardization of procedures and workflows within the Unit.
- Filing IP disclosures whenever possible and appropriate.
- Contribution to scientific dissemination (publications in high-impact peer-reviewed journals, presentations at conferences).
- Contribution to Unit workflows, project acquisition and project management.
- Position is offered within the Chips JU Pilot Lines.
|
In your career, let’s prove what’s possible.
- Design and deliver self‑healing automation that proactively detects common failure conditions, automatically remediates known issues, and prevents incident recurrence
- Architect and operate one‑click resolution workflows that standardize recovery actions and significantly reduce dependency on manual intervention
- Design, implement, and maintain DevOps‑based automation for software packaging, deployment, and lifecycle management across corporate client endpoints
- Build and own CI/CD pipelines to ensure automation is versioned, tested, secure, and deployed reliably at scale
- Create and maintain robust scripts, tooling, and automation frameworks to eliminate manual operational effort and reduce MTTR
- Integrate automation and remediation logic with endpoint management, monitoring, and alerting platforms to enable event‑driven remediation
- Analyze incident trends and operational pain points to identify and prioritize high‑impact self‑healing use cases
- Partner with Client Services, Security, and other operations teams to align automation outcomes with reliability and risk objectives
- Continuously improve automation coverage, effectiveness, and resilience through metrics, operational feedback, and iterative enhancement
- Document automation solutions, remediation logic, and operational runbooks to support consistent adoption and long‑term maintainability
|
In your career, let’s prove what’s possible.
- be involved in all phases of the software development (SW) lifecycle, including the testing, analysis and maintenance of the software system
- participate in the SW deployment process ensuring qualified Software Products are successfully installed at our customer's facilities
- perform troubleshooting of system software related issues
- perform in-house & onsite support of customer install base and resolution of customer issues
- test, troubleshoot and propagate errors clearly to SW and HW Development Engineers
- setup and maintain tool simulators, testing environments, lab support to reproduce issues found in field and verify SW solutions
- understand customer technology & productivity needs and feedback those requirements into software development
- prepare presentations to Lam internal stakeholders and customers travel worldwide wherever semiconductor customers are located (up to 25%
|
