In your career, let’s prove what’s possible.
- Assembly and Test Pilot product and modules in high quality
- Working on newest products and design and get them ready for production.
- Work together with colleagues in pilot production area in several areas (mechanical, electrical, chemical or testing area)
- Supporting assembly and documentation of test fixtures and other assemblies
- Reporting issues and drive improvements and new ideas to improve efficiency.
|
In your career, let’s prove what’s possible.
- Responsible for performing professional process engineering research, development and evaluation in semiconductor environment
- Reviews processing techniques and methods applied in the manufacture, fabrication and evaluation of products including in-house lab demonstrations
- Conceives and plans projects involving definition and selection of new concepts and approaches
- Works with customer and senior engineers cross functionally to understand roadmaps, process flow, inflection points, requirements and business issues/ challenges.
- May act as single point of contact accountable for process related customer requests
- Drives introduction and evaluation of new technologies at customer sites including new tool qualifications
|
|
|
Ihre Aufgaben umfassen dabei:
- Mitwirkung im technisch/kaufmännischen Bereich der Verkehrs- und Infrastrukturplanung
- Dokumentation der Leistungserfassung
- Aufmaß- und Rechnungskontrolle
- Bearbeitung von Mehrkostenforderungen
- Unterstützung der Projektleitung beim Vertragsmanagement
- Regieabrechnungen bis zur Rechnungserstellung
- Qualitätsüberwachung, Dokumentation und strukturierte Archivierung
|
|
|
In your career, let’s prove what’s possible.
- Lead process development projects for wet clean technologies used in semiconductor fabrication.
- Manage and mentor a team of process engineers and technicians.
- Design and execute experiments (DOE) to evaluate and optimize process parameters.
- Collaborate with hardware engineering, product marketing, and customer support teams to define and deliver integrated solutions.
- Analyze test data to identify trends, troubleshoot issues, and propose improvements.
- Interface with customers to support demos, qualifications, and technology transfers.
- Drive continuous improvement initiatives to enhance yield, reduce cost, and improve reliability.
- Present technical findings and strategic plans to senior leadership and external stakeholders.
|
IHR AUFGABENGEBIET:
- Abwicklung von Projekten – Typprüfungen, Genehmigungen, Fahrzeugzulassungen, Achslastberechnung
- Kontakt mit den zuständigen Behörden, Prüfstellen und Partnern
- Erstellung der erforderlichen Produktdokumentation
- Überprüfung von Fahrzeugen und Anhänger gem. § 57a
- Diagnoseerstellung und Fehlersuche
|
IHR AUFGABENGEBIET:
- Angebotslegung – Preiskalkulation
- Kundenakquise und Betreuung bestehender Kunden
- Nachkalkulationen
- Produktionsplanung und Mitarbeiterführung
- Material- und Werkzeugbestellung im ERP
- Organisation der Wartung der Produktionsanlagen
|
Vollzeit
Kärnten, Steiermark, Osttirol
12.08.2025
Kärnten, Steiermark, Osttirol
Ihre Aufgabe
- Kundenakquisition und -betreuung
- Technische Beratung
|
Nutzfahrzeuge – Aufbauten
- Montage von Kipper, Ladekränen und Wechselsysteme sowie deren pneumatischen und hydraulischen Komponenten
- Anbau von Hydraulikleitung, Schläuchen und Aggregaten
- Lesen von technischen Zeichnungen und Auftragsbeschreibungen
- selbstständige Durchführung von Heft- und Schweißarbeiten an Stahlkomponenten (MAG)
- selbstständiges Anfertigen von LKW Anbauteile wie Werkzeugkistenhalter, Aufstiegshilfen und Befestigungskonstruktionen
|
SEMICORE Entwicklung & Service GmbH
Vollzeit
Über uns
- Kombination von Hardware- und Softwarethemen für komplexe elektrische Systeme
- Technisches Konstruieren und Auslegen von mechanischen Bauteilen im elektrotechnischen Umfeld
- Entwicklung und Umsetzung von Automatisierungs- und Steuerungslösungen
- Programmierung und Softwareentwicklung für elektrische Anlagen, inklusive Sicherheitskonzepte
- Planung und Umsetzung von Kabelkonfektionierungen sowie Erstellung technischer Dokumentationen
- Mitarbeit in interdisziplinären Entwicklungsteams und Unterstützung bei Inbetriebnahmen
|
Bereich Badezimmer
- Kompetente Kundenberatung im Möbelbereich
- Auf die Bedürfnisse des Kunden abgestimmte Planung von Einrichtungslösungen
- Erstellung von Plänen mit der EDV
- Ordnungsgemäße Abwicklung von Kundenaufträgen
|
Deine Aufgaben
- Elektrische und mechanische Inbetriebnahme gemäß vorhandenen Plänen bzw. Zeichnungen
- Montage sowie Testung der Anlagen
- Durchführung von Diagnosearbeiten und Erarbeitung von Problemlösungen
- Prüfung und Dokumentation des Materials sowie ggf. Abweichungen
- Aktive Mitarbeit an Prozessen zur Verbesserung der Arbeitsabläufe und Produkte
|
Dienstort:
- abgeschlossene Lehre als Elektrotechniker:in bzw. eine vergleichbare Ausbildung (z. B. Abschluss HTL, Fachschule)
- Staatsbürgerschaftsnachweis (z. B. Foto vom Reisepass)
- unbeschränkter Zugang zum österreichischen Arbeitsmarkt (Nachweis entfällt bei EU-Bürger:innen)
|
In your career, let’s prove what’s possible.
- Assembly and Test Pilot product and modules in high quality
- Working on newest products and design and get them ready for production
- Work together with colleagues in pilot production area in several areas (mechanical, electrical, chemical or testing area)
- Supporting assembly and documentation of test fixtures and other assemblies
- Reporting issues and drive improvements and new ideas to improve efficiency
|
Standort
- Eine freiwillige 6. Urlaubswoche ab einem Jahr Betriebszugehörigkeit
- Vergünstigte Einkaufsmöglichkeiten im BAUHAUS
- Prämiensystem
- einen sicheren Arbeitsplatz mit Weiterentwicklungsmöglichkeiten in einem modernen und dynamischen Unternehmen
- Möglichkeit zur Lehre mit Matura
- Hohe Übernahmechancen nach erfolgreichen Ausbildungsabschluss
|
In your career, let’s prove what’s possible.
- Accountable for development, verification and documentation of fluid delivery systems to meet the systems specifications
- Provides concepts and technical designs for chemical fluid systems based on modeling & calculation data
- Accountable that system meets all engineering requirements regarding Compliance and Safety Standards
- Clarification of fluid delivery requirements
- Owns execution of BOM and documentation release plan
- Technical response to meet all interface requirements with other modules and environment
- Prepare all required deliverables based on product development plan (e.g. FMEA, technical specifications, risk analyses)
- Close relationship to our suppliers and internal department to ensure that we receive high quality-, well Performs engineering data analysis of mechanical and electrical aspects of the system by using of appropriate methods
|
In your career, let’s prove what’s possible.
- Implement new customer requirements and features in our existing application
- Maintain existing code base and investigating problem areas
- Demonstrating solutions by providing documentation, flowcharts, and clear code
- Working in cross functional teams throughout our organization
- Ability to travel within USA, Europe, and Asia (total is less than 10%)
|
In your career, let’s prove what’s possible.
- Operate and maintain the lab chemistry delivery and safety systems in conformance with the company EH&S and local government requirements
- Scrubbers and chemicals waste neutralization system operation and maintenance e.g.: maintain pH calibrations, sensors and alarms, refilling of chemicals,...
- Installation and rework of the general lab facilities:
- Cooling water, DI-Water, chemical drains
- CDA, nitrogen, oxygen, CO2, vacuum
- Exhaust lines
- Electrical systems
- Waste management: arrange the chemical and hazardous house waste disposal
- Periodic coverage of facilities on-call duties
- Lab supplies management:
- Order and storage of chemistries and gases
- Order and storage of Wafers.
- Order, store and maintain the safety equipment and PPE
|
In your career, let’s prove what’s possible.
- Troubleshooting and regular maintenance of the lab equipment
- Mechanical and electrical start-up of new lab tools
- Support the process engineers in executing the customer demonstrations
- Support product development by conducting design validation tests and delivering improvement proposals
- Documents the tools configuration and reports the tests results
- Support Lab facilities and willingness to support Lab On-Call team
|
In your career, let’s prove what’s possible.
- Troubleshooting and regular maintenance of the lab equipment
- Mechanical and electrical start-up of new lab tools
- Support the process engineers in executing the customer demonstrations
- Support the product development by conducting design validation tests and delivering improvement proposals
- Documents the tools configuration and reports the tests results
- Support LAB facilities and willingness to support LAB On-Call team
|
|
|
In your career, let’s prove what’s possible.
- You will be responsible for the design of new products and lifecycle management of existing electronic circuits.
- You will be responsible for component selection, design, development, testing and evaluation of control circuits for our machines.
- You will work with a multidisciplinary engineering design team: electrical, mechanical, software, technical support, productivity engineers, and suppliers, on the design, modification, of custom and OEM components.
- You will need to prepare and analyze test plans and procedures to assure that technical and operational requirements are met and properly demonstrated.
- You will be responsible for the collection and analysis of relevant material and data in preparation of your presentation at design, project, and program reviews.
|
In your career, let’s prove what’s possible.
- be involved in all phases of the software development (SW) lifecycle, including the testing, analysis and maintenance of the software system
- participate in the SW deployment process ensuring qualified Software Products are successfully installed at our customer's facilities
- perform troubleshooting of system software related issues
- perform in-house & onsite support of customer install base and resolution of customer issues
- test, troubleshoot and propagate errors clearly to SW and HW Development Engineers
- setup and maintain tool simulators, testing environments, lab support to reproduce issues found in field and verify SW solutions
- understand customer technology & productivity needs and feedback those requirements into software development
- prepare presentations to Lam internal stakeholders and customers
- travel worldwide wherever semiconductor customers are located (up to 25%)
|
In your career, let’s prove what’s possible.
- Accountable for development, verification and documentation of fluid delivery systems to meet the systems specifications
- Provides concepts and technical designs for chemical fluid systems based on modeling & calculation data
- Accountable that system meets all engineering requirements regarding Compliance and Safety Standards
- Clarification of fluid delivery requirements
- Owns execution of BOM and documentation release plan
- Technical response to meet all interface requirements with other modules and environment
- Prepare all required deliverables based on product development plan (e.g. FMEA, technical specifications, risk analyses)
- Close relationship to our suppliers an internal departments to ensure that we receive high quality-, well tested and cost saving solutions for our technical needs
- Performs engineering data analysis of mechanical and electrical aspects of the system by using of appropriate methods and tools (e.g. MATLAB, LabVIEW …)
|
In your career, let’s prove what’s possible.
- Verantwortung für die qualitativ hochwertige Wartung und Reparatur komplexer elektromechanischer Systeme direkt beim Kunden vor Ort.
- Analyse und systematische Fehlersuche bis auf Komponentenebene zur schnellen Identifikation technischer Probleme.
- Durchführung vollständiger Installationen und Inbetriebnahmen sowie Verlagerungen von Anlagen.
- Diagnose und Behebung von Störungen zur Minimierung von Ausfallzeiten und zur Sicherstellung eines reibungslosen Systembetriebs.
- Ableitung und Umsetzung geeigneter Korrekturmaßnahmen bei technischen Problemen.
- Durchführung von Installationen und/oder Verlagerungen von Anlagen an Kundenstandorten.
- Kontinuierliche Weiterbildung durch Schulungen, technische Handbücher, interne Veröffentlichungen und andere relevante Informationsquellen.
- Unterstützung bei komplexen technischen Änderungen und Upgrades gemäß Engineering Change Notifications (ECNs).
- Pflege von Dokumentationen und Berichten zur Koordination mit Vorgesetzten und Kunden.
- Mitwirkung bei der Planung, Steuerung und Umsetzung von Projekten mit begrenztem Umfang und zeitlicher Dauer.
|
In your career, let’s prove what’s possible.
- Responsible for providing quality on-site repair and maintenance service of complex electro-mechanical systems. Analytical troubleshooting of technical problems to component level. Performs complete installation/relocation start-up services
- Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions. Determine corrective actions as required.
- Installations and/or relocations of equipment at customers’ sites.
- Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials.
- Assist in complex field modifications and updates as released in Engineering Change Notifications.
- Maintain records and reports as required to properly coordinate activities with supervisors and customers.
- Planning, management, and execution of projects of a limited scope and duration
|
In your career, let’s prove what’s possible.
- Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions. Determine corrective actions as required.
- Installations and/or relocations of equipment at customers’ sites.
- Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials.
- Assist in complex field modifications and updates as released in Engineering Change Notifications.
- Maintain records and reports as required to properly coordinate activities with supervisors and customers.
- Assist in the planning, management, and execution of projects of a limited scope and duration
- Providing high-quality on-site support for repair and maintenance service of complex electro-mechanical systems.
- Assists with the full installation and relocation processes, including system start-up services
|
|
|
Vollzeit | befristet | Praktikum
|
