In your career, let’s prove what’s possible.
- Design and prepare test fixtures\equipment and executes the test followed by data evaluation
- Test set-up and execution for
- Components/Devices
- Systems/Tools
- Execution of tests
- Start-up of test stand
- Handling of related components
- Operating various measurement systems
- Structured diagnostic and problem-solving methods must be used during start-up and LAB testing
- Apply statistical methods for specification of reliability tests and data evaluation
- Create test documentation based on our standards and meaningful presentation of results
- Active cooperation with other colleagues on test stand or tool in our test floors or in our clean room laboratory and handling of acids
- Forward change requests / improvement suggestions to the developer in charge
|
In your career, let’s prove what’s possible.
- Responsible for performing professional process engineering research, development and evaluation in semiconductor environment
- Reviews processing techniques and methods applied in the manufacture, fabrication and evaluation of products including in-house lab demonstrations
- Conceives and plans projects involving definition and selection of new concepts and approaches
- Works with customer and senior engineers cross functionally to understand roadmaps, process flow, inflection points, requirements and business issues/ challenges.
- Acts as customer technology manager in the planning, data collection, analysis and reporting
- Acts as single point of contact accountable for process related customer requests
- Drives introduction and evaluation of new technologies at customer sites including new tool qualifications
|
In your career, let’s prove what’s possible.
- Responsible for performing professional process engineering research, development and evaluation in semiconductor environment
- Reviews processing techniques and methods applied in the manufacture, fabrication and evaluation of products including in-house lab demonstrations
- Conceives and plans projects involving definition and selection of new concepts and approaches
- Works with customer and senior engineers cross functionally to understand roadmaps, process flow, inflection points, requirements and business issues/ challenges.
- Acts as customer technology manager in the planning, data collection, analysis and reporting
- Acts as single point of contact accountable for process related customer requests
- Drives introduction and evaluation of new technologies at customer sites including new tool qualification
|
Dein Aufgabenbereich
- Abgeschlossene technische Ausbildung (LAP, HTL, Universität, FH)
- Erste einschlägige Berufserfahrung, vorzugsweise im Rohrleitungs- und Anlagenbau
- Technisches Verständnis
- Bereitschaft zur Weiterentwicklung
- Hohe zeitliche Flexibilität und Reisebereitschaft
- Sehr gute Englisch Kenntnisse in Wort und Schrift
|
In your career, let’s prove what’s possible.
- Responsible for performing professional process engineering research, development, and evaluation in support of the company’s complex semiconductor capital equipment and systems.
- Reviews processing techniques and methods applied in the manufacture, fabrication and evaluation of products. Involvement may begin at any step from pilot plant to full-scale manufacturing.
- Conceives and plans projects involving definition and selection of new concepts and approaches in the processing or development of new processes.
- Compiles and evaluates test data to determine appropriate limits and variables for process specifications.
- Supports customer technology managers in the planning, data collection, analysis, and reporting of customer demos to defend existing process applications.
- Drives the adoption of new technology at the customer site. Works closely with customer to demonstrate and introduce new technologies at customer sites through demos, on site evaluations, and new tool qualifications.
- Works with customer and senior engineers cross functionally to understand roadmaps, process flow, inflection points, requirements and business issues/ challenges.
- Works with suppliers to make sure required parts and supplies are available
- Contributes to product development and release activities.
- May act as CTM-single point of contact accountable for process related requests.
|
Tätigkeiten
- Anfertigung von technischen Zeichnungen und Ausführungsplänen mittels CAD
- Erstellung von Stromlaufplänen und Übersichtsplänen
- Technische Dokumentation und Pflege der Projektdaten
- Unterstützung der Projektleitung bei der Projektabwicklung
|
|
|
|
|
|
|
Ihre Aufgaben:
Eigenverantwortliche Leitung und Abwicklung von ProjektenProjektplanung unter Einhaltung von Kosten-, Termin- und RessourcenvorgabenKoordination mit Bauherren, Planern, Subunternehmern und BauleitungErstellung von Termin- und ResourceplänenFührung des Projektteams & Reporting
|
|
|
Research Engineer – Solid-state quantum systems on chip (all genders)
- Experimental work in the Applied Quantum Sensing team
- Design, develop, and test optical, electronic, magnetic, and microwave solutions for quantum systems-on-chip.
- Drive the development and exploration of novel quantum control protocols and implement software and hardware solutions.
|
Vollzeit
Villach, Pavia
17.07.2026
Villach, Pavia
|
Vollzeit | Teilzeit | befristet | Praktikum
|
|
|
|
|
|
|
Senior Research Engineer – Quantum Photonic Integrated Circuit Design and PDK development (all genders)
- Designing photonic integrated circuits (passive components and modulators) for quantum applications based on AlN.
- Contributing to the development and validation of PDK components, including layout, simulation, and documentation.
- Generating layout from design and performing design rule checks
- Characterizing fabricated devices in the lab (optical/electrical testing) and analyzing measurement data
- Designing improvements based on characterization results to enhance device performance and yield
- Collaborating closely with process and fabrication teams to ensure high design-to-fab fidelity
- Contributing to reporting, documentation, publication, IP generation, and patent application
- Supporting industry and academic collaborations within multidisciplinary projects
|
Senior Research Engineer - Process Development for Integrated Photonics Fabrication (all genders)
- PIC Fabrication & Development:Designing, fabricating, and testing PICs.
- Platform Specialization: Focusing primarily on process development for either Aluminum Nitride (AlN) or Thin-Film Lithium Niobate (TFLN) Platform.
- Technology ownership: Owning a platform flow (AlN or TFLN) and acting as a go-to person for fabrication topics, including coordination with cleanroom/process engineering and alignment with design/test needs. This includes mentoring and knowledge transfer, proactive risk/bottleneck identification and mitigation, and contributing to roadmap/benchmarking and experimental strategy.
- DOE- Driven process development:
- Developing and integrating process modules for stable, repeatable fabrication, increasing
- Technology Readiness Level (TRL) and pilot-line readiness.
- Planning and executing Design of Experiments (DOE) to optimize processes.
- Driving process integration, stability, and performance improvements for scalable fabrication.
- Defining Process windows
- Performing data-driven root-cause analysis
- Fabrication: Hands-on work with key fabrication processes including lithography, deposition (PVD/ALD/PECVD), dry etch (ICP-RIE), metrology/SPC, and documentation/change control.
- Collaboration & Teamwork:
- Working closely with SAL’s process engineering team.
- Collaborating to ensure high fabrication fidelity.
- Supporting industry and academic collaborations within multidisciplinary projects.
- Documentation & IP:
- Reporting and thorough documentation of work.
- Contributing to IP generation and patent applications.
|
|
|
Senior Research Engineer – Technology development and process integration for MEMS-based applications (all genders)
- Technology development for MEMS-based devices in various fields such as optics, acoustic, inertial sensors from concept to prototype.
- Development and implementation of DOE to improve device performance.
- Microfabrication and prototyping in cleanroom facility by using 200 mm wafer level technology.
- Advanced testing of developed MEMS devices (electrical, mechanical, acoustic, …).
- Scientific communication / reporting of research results.
|
Vollzeit | Teilzeit | befristet | Praktikum
|
In your career, let’s prove what’s possible.
- Responsible for performing professional process engineering research, development and evaluation in semiconductor environment
- Reviews processing techniques and methods applied in the manufacture, fabrication and evaluation of products including in-house lab demonstrations
- Conceives and plans projects involving definition and selection of new concepts and approaches
- Works with customer and senior engineers cross functionally to understand roadmaps, process flow, inflection points, requirements and business issues/ challenges.
- Acts as customer technology manager in the planning, data collection, analysis and reporting
- Acts as single point of contact accountable for process related customer requests
- Drives introduction and evaluation of new technologies at customer sites including new tool qualification
|
Was wir bieten
- Abwechslungsreiches Aufgabenfeld mit hoher Eigenverantwortung
- Weiterentwicklungspotenzial
- Kollegiales Betriebsklima
- Langfristige Anstellung
|
Senior Research Engineer – Nitride Thin-Film Materials (Wide Band Gap) (all genders)
- Development of thin films for piezoelectric and wide-band-gap applications.
- Design and execute experiments to optimize nitride thin film materials, guided by device specifications and performance feedback.
- Structural and functional (e.g. dielectric, electrical, ferroelectric) characterization of the deposited thin films.
- Collaboration with design, fabrication, characterization, and process engineer teams to optimize full process flow and device performance.
- Definition of strategies for material optimization and pursuing scientifically relevant investigations.
- Development of strategies to address novel material properties and novel fields of application.
- Contributing to the standardization of procedures and workflows within the Unit.
- Filing IP disclosures whenever possible and appropriate.
- Contribution to scientific dissemination (publications in high-impact peer-reviewed journals, presentations at conferences).
- Contribution to Unit workflows, project acquisition and project management.
- Position is offered within the Chips JU Pilot Lines.
|
In your career, let’s prove what’s possible.
- Accountable for development, verification and documentation of fluid delivery systems to meet the systems specifications
- Provides concepts and technical designs for chemical fluid systems based on modeling & calculation data
- Accountable that system meets all engineering requirements regarding Compliance and Safety Standards
- Clarification of fluid delivery requirements
- Owns execution of BOM and documentation release plan
- Technical response to meet all interface requirements with other modules and environment
- Prepare all required deliverables based on product development plan (e.g. FMEA, technical specifications, risk analyses)
- Close relationship to our suppliers an internal departments to ensure that we receive high quality-, well tested and cost saving solutions for our technical needs
- Performs engineering data analysis of mechanical and electrical aspects of the system by using of appropriate methods and tools (e.g. MATLAB, LabVIEW …
|
Vollzeit
München, Villach
17.07.2026
München, Villach
|
|
|
In your career, let’s prove what’s possible.
- Design and deliver self‑healing automation that proactively detects common failure conditions, automatically remediates known issues, and prevents incident recurrence
- Architect and operate one‑click resolution workflows that standardize recovery actions and significantly reduce dependency on manual intervention
- Design, implement, and maintain DevOps‑based automation for software packaging, deployment, and lifecycle management across corporate client endpoints
- Build and own CI/CD pipelines to ensure automation is versioned, tested, secure, and deployed reliably at scale
- Create and maintain robust scripts, tooling, and automation frameworks to eliminate manual operational effort and reduce MTTR
- Integrate automation and remediation logic with endpoint management, monitoring, and alerting platforms to enable event‑driven remediation
- Analyze incident trends and operational pain points to identify and prioritize high‑impact self‑healing use cases
- Partner with Client Services, Security, and other operations teams to align automation outcomes with reliability and risk objectives
- Continuously improve automation coverage, effectiveness, and resilience through metrics, operational feedback, and iterative enhancement
- Document automation solutions, remediation logic, and operational runbooks to support consistent adoption and long‑term maintainability
|
|
|
