Vollzeit | befristet | Freelancer, Projektarbeit
At a glance
- Preparation of samples to enable materials characterization using SEM
- Evaluation of state-of-the-art electron microscopy techniques (EBSD,ECCI) to analyze semiconductor materials
- Optimization of the applied methodology (sample preparation, characterization technique)
- Investigation of the microstructure, lattice strain and defects in semiconductor materials (Si, SiC) after individual manufacturing steps
- Correlation of the materials characteristic and the industrial processing
- Documentation of the results and preparation of a master’s thesis
|
At a glance
- Assist in testing and extending library of low-level IPs (OTA, current DAC, etc.) and demonstrating the potential of this bottom-up structural approach
- Work in a dynamic environment
- Get the opportunity to sharpen your analog IC Design skills and expand your programming knowledge
- Collaborate with experts in design methodology and analog IC design
|
At a glance
- Get experience with Mixed-Signal High Speed, RF and mmWave and Integrated Circuits.
- Get experience with measurements related to High-Speed PLLs and Data Communication: Jitter, Eye Diagram, BERT.
- Get experience with high-end RF/mmWave measurement equipment.
- Get hand-on experience in Validation and Debugging.
- Design of PCBs for the measurement of products
- Prototype and evaluate new tools and methodologies.
- Familiarize yourself with Validation flow: definition of appropriate measurement setup, automation, data post-processing and analysis.
|
Vollzeit | befristet | Praktikum
At a glance
- Analog blocks in Infineon microcontrollers
- Analog to Digital (ADC) and Digital to Analog (DAC) converters
- High speed interfaces
- High Precision Oscillators and PLLs
- Power Management Systems (PMS)
- Battery Management Systems (BMS)
- DCDC Converter for low voltage applications and Linear Voltage Regulators (LDOs)
- RF blocks for radar systems
- Bias & Control circuits for 5G antennas
|
At a glance
- Gain insight in the power management of state-of-the-art microcontrollers
- Analyze, model, simulate and measure analog mixed-signal circuits and systems
- Getting familiar with the conception, design, verification and validation of electronic building blocks
|
Your future responsibilities
- Contribute to R&D activities for novel test setups in the field of advanced electrical and thermal power semiconductor device and package characterization
- Align with other scientists and engineers to build prototypes and verify simulation results
- Contribute to research projects with international research and industrial partners
- Take on project responsibilities for successful execution of industrial research projects
- Continuously assessing the progress targeting given timeframe and budget
- Organization of work, alignment of resources and coordinate the project team as well as external collaborators
- Reporting internally to and externally to customers and partners
- Management of multi-firm consortia (typically up to 10 partners) collaborating in research projects both nationally and internationally
- Keep the overview and manage technical interdependencies of several project responsibilities
- Support of the project acquisition and thereby being constantly involved in the pushing future research topics
- Being sparring partner for Junior Scientist and supervise PhD and master students
|
Your future responsibilities
- Responsibility for lithography systems, mainly track and exposure tools
- Develop new lithography processes
- Collaborate with research teams within SAL to fabricate state of the art research vehicles
- Ensure stable processes and equipment run for the lithography department
- Evaluate new processes and equipment
- Stay current with industry advancements and emerging technologies in lithography and semiconductor manufacturing.
|
At a glance
- Studying digital design and architectures
- Learning coding in SystemVerilog and Verilog design languages
- Learning scripting in Bash, Tcl, Python
- Learning how to use design tools, schematics and debugging
- Going through trainings related to the digital design and tool chain used
- Learning how to write SystemVerilog assertions
- Writing behavioral models in SystemVerilog
|
In your career, let’s prove what’s possible.
- Drive new mechanical developments in concept and feasibility state referring to fundamental new approaches for future applications.
- Involve problem-solving, creativity, and collaboration with other specialists to bring ideas from concept to reality.
- Prepare high-quality reports and technical presentations to clearly communicate design intent, evaluation, and validation to a diverse audience in design reviews.
- Collaborate with suppliers and internal teams to ensure solutions can be manufactured with high-quality, cost-optimized, and to requirements.
- Provide technical guidance and mentoring to more junior engineers.
|
At a glance
- Drive, define and ensure execution of the product roadmap
- Act as project owner of R&D projects and orchestrate marketing efforts and deliverables (business case development, requirements gathering, etc.) during the development project milestones
- Lead a strategic area of the business, developing cross functional and cross divisional relations, collaborating with technical marketing, R&D, quality, operations and worldwide sales
- Manage and develop a business strategy for the product portfolio, including value proposition building, development/management of leading customer opportunities, positioning and initial pricing
- Analyze the market to gain an extensive understanding of the business environment and drive competitor analyses
- Engage and build strategic relationships with key and channel customers
- Develop sales collateral and training, orchestrate product launches and evangelize product families to wide internal and external audiences
- Report routinely to top management regarding the status of the business and the development efforts
- Represent the Product Line to internal and external partners worldwide
|
In your career, let’s prove what’s possible.
- Customer Relationship Management: Develop and maintain strong relationships with key accounts, acting as the primary technical point of contact.
- Priority Alignment: Drive alignment between account teams and clean product line on priorities for market penetrations and defenses.
- Process Optimization: Collaborate with customers to optimize semiconductor manufacturing processes, ensuring the highest levels of efficiency and performance.
- Product Demonstrations: Organize product demonstrations and presentations to showcase the capabilities and benefits of Lam Research technologies.
- Feedback Loop: Gather and relay customer feedback to internal teams to drive continuous improvement and innovation in our products and services.
- Training and Education: Provide training and educational resources to customers and account teams to enhance their understanding and utilization of Lam Research technologies.
- Cross-Functional Collaboration: Work closely with sales, engineering, and product development teams to align customer needs with company objectives.
|
Vollzeit | befristet | Praktikum
At a glance
- Support component verification engineers in the validation of isolated gate drivers
- Develop setups using automation
- Design PCB boards with Altium
- Document measurement results and debugging setups
- Assist with day-to-day task such as soldering components and maintaining lab equipment
|
In your career, let’s prove what’s possible.
- Verify chemical resistance of new or existing components when exposed to defined chemical
- Conduct material related tests for characterization and/or compatibility
- Drive material related failure analysis from units returned from field
- Test and define hardware limits related to chemical properties (viscosity, concentration, temperature, etc.)
- Drive the release of new chemicals on customer requests in alignment with design, safety & process
- Provide collected technical data in trade-off tables to summarize useable materials in the design/redesign phases with correlated risks
- Drive concept and feasibility projects
|
Your future responsibilities
- Responsibility for dry etch semiconductor fabrication equipment
- Develop new dry etch processes for new materials
- Collaborate with research teams within SAL to fabricate state of the art research vehicles
- Ensure stable processes and equipment run for the dry etch department
- Evaluate new processes and equipment
- Stay current with industry advancements and emerging technologies in lithography and semiconductor manufacturing.
|
In your career, let’s prove what’s possible.
- Develop and characterize new wafer clean wet processes.
- Develop and sustain new processes and process improvements to reduce production costs and increase yields.
- Compile and analyze test data to establish next steps in process development and determine appropriate limits and variables for process specifications.
- Define process specifications and equipment requirements.
- Collaborate internally to plan, collect data, analyze results, and report on customer demos for new and existing process applications.
- Partner cross-functionally and with customers to understand roadmaps, process flow, inflection points, requirements, and business challenges.
- Demonstrate strong communication skills and teamwork ability.
|
In your career, let’s prove what’s possible.
-
Performs IT functions such as design, analysis, evaluation, testing, debugging and implementation of applications programs supporting the company infrastructure business processes and operations. Analyzes, installs, acquires, modifies and supports operating systems, database or utilities software. Plans, conducts and directs the analysis of business problems with automated systems solutions.
|
At a glance
- Analysis of the existing semiconductor chip test programs (e.g. test sequence, instrument connect/disconnect cycles, waiting times, ...)
- Automation or part-automation of the test program analysis and documentation
- Update of test program documentation with focus on D2TI requirements
|
In your career, let’s prove what’s possible.
- Develop and conduct resourcing planning including task and status tracking, vacation planning and backup management.
- Organize feasibility studies, design approaches and test plans to characterize and validate design performance.
- Support the full life cycle of mechanical and electro-mechanical systems from concept to productization including conceptualization, designing, CAD modeling, development, and test/validation.
- Ensure documentation aligns with SEMI, Lam standards, and industry best practices for geometric dimensioning and tolerancing (GD&T).
- Prepare high-quality reports, KPI measuring and technical presentations to clearly communicate design intent, evaluation, and validation to a diverse audience in design reviews.
- Collaborate with suppliers and internal teams to ensure solutions can be manufactured with high-quality, cost-optimized, and to requirements.
- Provide key deliverables including Failure Modes and Effects Analysis (FMEA), technical specifications, risk analysis, test specifications, and design review presentations.
- Provide technical guidance and mentoring to more junior engineers.
|
In your career, let’s prove what’s possible.
- Develops, monitors and supports EHS functions to ensure compliance and continuous improvement. Works collaboratively with stakeholders, teammates, and other support resources.
- Leads projects to address EHS AOP objectives.
- Owns EHS programs that are subject to significant change, re-development, or improvement.
- Capable of motivating stakeholders to meet commitments towards EHS objectives.
- Capable of project planning, prioritization and achievement to goals and schedule.
- Makes interpretations to EHS regulations and protocols in alignment with EHS leadership.
- Decides and aligns on methods for implementing EHS initiatives and the parameters of those initiatives.
- Accountable to the objectives owned by the function and applicable area.
- Manages environmental permits for air, wastewater, stormwater, etc. manages reporting, permit compliance, and regulatory inspections.
- Manage the chemical safety and hygiene plan, including all aspects related to chemical management, chemical exposure monitoring, exposure threshold limit determinations, and risk / assessment mitigation.
|
At a glance
- Lead a team of technical experts developing SiC-MOSFET, Si-IGBT and diode chip technologies across various Infineon sites
- Set technical direction together with your team within the field of SiC and Si power device technologies for electro-mobility
- Hire and on-board new team members in a fast growing team
- Shape the future growth of your team in accordance to the strategic needs of the electro-mobility market and in close alignment with the global and cross-divisional development teams
- Manage interfaces towards the various stakeholders within ATV and across
- Foster continuous improvement of development methods within your team and within the greater development community
|
In your career, let’s prove what’s possible.
- Work in a cleanroom laboratory as part of the Process Engineering team supporting new product development, characterizing current process
- applications, and performing customer demos
- Operational proficiency of clean processing equipment and wafer metrology tools
- Along with engineering team, prepare equipment and execute test plans
- Analyze and interpret data to draw inferences and make recommendations
- Perform baseline qualifications of lab tools, identify problems, and work with appropriate team to resolve issues
- Assist engineers in execution, data collection and test reporting of customer demos
|
Your future responsibilities
- Calorimetric setups for loss estimations in power converters especially in the context of switching losses (soft/hard switching characterization).
- Application of machine learning techniques for predicting losses in power converters based on calorimetric data.
- Novel methods to decouple losses of the power converter and on-state voltage measurements in the context of wide-band gap devices.
- Automation of novel characterization methods for WBG devices and different packages.
- Temperature calibrated power semiconductor simulation models and model validation.
- Accurate characterization and influence of ‘asymmetry’ on the losses of paralleled switching devices.
- Improve power electronic cooling by investigating new materials and methods and evaluate in the lab.
- Tackle the challenges around gate driver requirements for wide-band gap devices.
- Develop Testboards for optimized half-bridge setups for different packaged devices, integration with the gate driver boards and testing.
- Implement sensors and feedback mechanisms in gate drivers, and design algorithms for real-time monitoring and adaptive control based on the operating conditions.
|
At a glance
- Lead a team of project managers, be responsible for supporting functions as well as manage direct reports, including recruiting, performance evaluation, coaching, training and development
- Collaborate / communicate with business functions to transform product roadmaps into a series of actionable and measurable projects to achieve the business objectives
- Actively manage the resource pipeline for project managers and supporting functions
- Ensure project schedule planning and its compliance to internal guidelines
- Drive continuous improvement and quality of project management processes and methods
- Establish proper support of projects regarding requirement management and change management
- Act as project manager for methodology projects
- Ensure that processes and quality guidelines are followed
|
At a glance
- Creating compelling PowerPoint presentations: You will be responsible for developing visually appealing and informative PowerPoint slides to support the communication and presentation needs of the product marketing team. This includes effectively communicating complex information in a clear and concise manner.
- Data analysis and automation using Excel and VBA: You will utilize your skills in Excel and VBA to manipulate and analyze data, create interactive dashboards, and automate repetitive tasks. This may involve cleaning and organizing data, performing analysis, and developing macros to streamline processes and improve efficiency within the team.
- Providing team support: You will collaborate with the product marketing team on various tasks, such as conducting market research, analyzing competitor data and preparing reports. Additionally, you maybe involved in coordinating internal administrative topics to ensure the smooth operation of the team.
|
In your career, let’s prove what’s possible.
- Review, analyze and process purchase requisitions
- Process purchase change orders and requests for quotes to suppliers
- Manage purchase order releases daily to meet demand requirements
- Coordinate purchasing activities with manufacturing, planning and engineering departments to acquire inventory in a cost effective and timely manner
- Work with the suppliers on a daily basis to assure scheduled deliveries are met
- Understand, maintain weekly reports
- Develop and maintain key supplier relationships with day-to-day interface (peer level) to review open action items, suppliers performance to commitments of on time deliveries, future demand and future cost reductions forecasting
|
In your career, let’s prove what’s possible.
- Accountable for development, verification and documentation of fluid delivery systems to meet the systems specifications.
- Provides concepts and technical designs for chemical fluid systems based on modeling & calculation data.
- Accountable that system meets all engineering requirements regarding Compliance and Safety Standards.
- Clarification of fluid delivery requirements.
- Owns execution of BOM and documentation release plan.
- Technical response to meet all interface requirements with other modules and environment.
- Prepare all required deliverables based on product development plan (e.g. FMEA, technical specifications, risk analyses).
- Close relationship to our suppliers an internal departments to ensure that we receive high quality-, well tested and cost saving solutions for our technical needs.
- Performs engineering data analysis of mechanical and electrical aspects of the system by using of appropriate methods and tools (e.g. MATLAB, LabVIEW …).
|
At a glance
- Define, setup and maintain Configuration, Change & Requirement Management infrastructure (SPS, JIRA, JAMA, Release Manager, document management system (DMS), SVN, ClearCase…)
- Identify and maintain all documents that are created and used during project development
- Review of the formalities according to relevant ISO* standards prior to their official releases
- Support the Project Manager with creation and maintenance of Product Configuration, Configuration Baselines and their records
- Support (execution) of Configuration Audits
- Support the engineering team in writing clear requirements and their tracing based on Infineon standard and rules
- Provide consolidated requirements traceability and coverage reports through all requirements levels, based on inputs from engineering team
- Be the project administrator for the requirements management tool and support users in tool handling
- Optional: programming of supportive scripts for Product Configurations within the respective tool scape
|
In your career, let’s prove what’s possible.
- Ensure manufacturing & warehouse loading on time and closely monitor material availability.
- Coordinate with various departments such as procurement, production, and logistics to ensure smooth workflow.
- Monitor the production process to meet few or no delays and ensure deadlines.
- Analyze production specifications data to maximize production output.
- Review and adjust the schedule where needed due to design changes, labor or material shortages, backlogs, or otherinterruptions.
- Maintain and manage inventory levels, ensuring the availability of necessary materials for production.
- Create and submit status and performance reports, collating and interpreting data on the production plan’s progress.
- Collaborate with quality control, warehouse, and other staff.
|
At a glance
- Solid C-programming skills
- Familiarity with 32-bit microcontrollers: architecture, memory, peripherals
- RTOS basic knowledge (required)
- Good English skills
|
In your career, let’s prove what’s possible.
- General Accounting tasks such as Debitor/Creditor Accounting, Asset Management, Bank
- Monthly Closes
- Support in any internal and external Audits
- Year End Preparations and contact person for Tax advisor and Auditors
- PoI for ESG reporting
- Prepare audit documentation in a clear, concise, and timely manner
- Perform Sarbanes-Oxley (SOX) Controls testing, and review testing procedures performed by other team members
- Participate in other projects or assignments as requested such as SAP S/4 Hana
- Preparation of monthly declarations
|
