In your career, let’s prove what’s possible.
- Improve, and standardize test methods and test fixtures for Lam products.
- Lead test fixture transitions to suppliers, including training, documentation, and on-site support when required.
- Own supplier test and facility readiness, including test reviews, sign-off activities, and risk assessment prior to Test fixture building and transitions.
- Coordinate test fixture duplication and rebuild efforts in close collaboration with pilot team.
- Provide remote and on-site support to suppliers during test-related line-down situations to ensure rapid issue resolution.
- Verify and set up duplicated test fixtures to ensure proper functionality and compliance with requirements.
- Maintain and update test documentation and test fixture Bills of Materials (BOMs) when required.
- Drive continuous yield, quality, and process improvements through test data analysis, root cause investigations, and corrective action implementation.
- Support the introduction of new products/components, design changes, or process updates by assessing test impact and readiness at supplier sites.
- Define and maintain supplier test best practices to ensure consistency across remote factories.
- Escalate unresolved or systemic issues to Leads, or Supervisors in a timely and structured manner.
- Perform system-level and component-level electrical testing and troubleshooting.
- Utilize basic testing equipment such as multi-meter, power supply, and RS connections.
- Define and document test and diagnostic programs, including procedures to support testing of new components based on Non-Standard Request or Change Orders.
- Improve testing methods for systems and equipment throughout product development and manufacturing phases.
- Collaborate with the Manufacturing Engineering team, suppliers, account teams, and Supplier Engineering Technology (SET) members to ensure seamless integration and smooth transitions.
- Work with internal and external stakeholders to influence decisions and drive company objectives
|
|
|
|
|
Teilzeit | befristet | Praktikum
|
|
|
|
|
|
|
In your career, let’s prove what’s possible.
- Design, develop, and maintain analogue and digital electronic circuits throughout the complete product lifecycle
- Perform component selection, schematic capture, circuit simulation, and PCB design to meet performance, cost, and reliability targets
- Drive technical requirements from concept through implementation, test, and release
- Collaborate with mechanical, software, systems, manufacturing, quality, and service engineering teams during product development
- Support system integration activities involving sensors, actuators, communication networks, and control systems
- Create and maintain engineering documentation including schematics, test reports, BOMs, design reviews, and technical specifications
|
|
|
In your career, let’s prove what’s possible.
- Is the lead engineer of a development program (product), making sure that mechanical and electrical hardware and the tool software work together to meet the system specification
- Owns developing the system specification based on the product specification and configuration options
- Is accountable for resolving design tradeoffs/conflicts to ensure the design is integrated, such that the overall product performs as described in the system specification
- Assures that the system meets engineering- and compliance standards, especially in the concept and detailed design phases
- Owns BOM (bill of material) setup and execution of the documentation release plan
- Prepares all required program/product related Engineering deliverables (e.g. FMEA, technical specifications, risk analyses)
- Technical responsible that all interfaces for the entire product are well defined and working
- Participates in the cost allocation model and assures that designs meet the cost targets
- Owns developing the reliability allocation model, the reliability design approach and test plans
|
|
|
In your career, let’s prove what’s possible.
- Responsible for performing professional process engineering research, development and evaluation in semiconductor environment
- Reviews processing techniques and methods applied in the manufacture, fabrication and evaluation of products including in-house lab demonstrations
- Conceives and plans projects involving definition and selection of new concepts and approaches
- Works with customer and senior engineers cross functionally to understand roadmaps, process flow, inflection points, requirements and business issues/ challenges.
- Acts as customer technology manager in the planning, data collection, analysis and reporting
- Acts as single point of contact accountable for process related customer requests
- Drives introduction and evaluation of new technologies at customer sites including new tool qualification
|
In your career, let’s prove what’s possible.
- Responsible for performing professional process engineering research, development and evaluation in semiconductor environment
- Reviews processing techniques and methods applied in the manufacture, fabrication and evaluation of products including in-house lab demonstrations
- Conceives and plans projects involving definition and selection of new concepts and approaches
- Works with customer and senior engineers cross functionally to understand roadmaps, process flow, inflection points, requirements and business issues/ challenges.
- Acts as customer technology manager in the planning, data collection, analysis and reporting
- Acts as single point of contact accountable for process related customer requests
- Drives introduction and evaluation of new technologies at customer sites including new tool qualification
|
Vollzeit | Leasing, Zeitarbeit
|
In your career, let’s prove what’s possible.
- Design, develop, and maintain electrical and electronic circuits throughout all phases of the product lifecycle.
- Drive component selection, circuit development, design verification, testing, and evaluation of control systems for our products.
- Collaborate closely with a multidisciplinary engineering team, including electrical, mechanical, and software engineers, technical support specialists, productivity engineers, and external suppliers, to design, develop, and enhance custom and OEM components.
- Develop, execute, and analyze test plans and procedures to ensure technical and operational requirements are fully met, validated, and documented.
- Collect, evaluate, and present technical data and findings to support informed decision-making during design, project, and program reviews.
|
|
|
Research Engineer – Solid-state quantum systems on chip (all genders)
- Experimental work in the Applied Quantum Sensing team
- Design, develop, and test optical, electronic, magnetic, and microwave solutions for quantum systems-on-chip.
- Drive the development and exploration of novel quantum control protocols and implement software and hardware solutions.
|
In your career, let’s prove what’s possible.
- Responsible for performing professional process engineering research, development, and evaluation in support of the company’s complex semiconductor capital equipment and systems.
- Reviews processing techniques and methods applied in the manufacture, fabrication and evaluation of products. Involvement may begin at any step from pilot plant to full-scale manufacturing.
- Conceives and plans projects involving definition and selection of new concepts and approaches in the processing or development of new processes.
- Compiles and evaluates test data to determine appropriate limits and variables for process specifications.
- Supports customer technology managers in the planning, data collection, analysis, and reporting of customer demos to defend existing process applications.
- Drives the adoption of new technology at the customer site. Works closely with customer to demonstrate and introduce new technologies at customer sites through demos, on site evaluations, and new tool qualifications.
- Works with customer and senior engineers cross functionally to understand roadmaps, process flow, inflection points, requirements and business issues/ challenges.
- Works with suppliers to make sure required parts and supplies are available
- Contributes to product development and release activities.
- May act as CTM-single point of contact accountable for process related requests.
|
|
|
In your career, let’s prove what’s possible.
- Responsible for performing professional process engineering research, development and evaluation in semiconductor environment
- Reviews processing techniques and methods applied in the manufacture, fabrication and evaluation of products including in-house lab demonstrations
- Conceives and plans projects involving definition and selection of new concepts and approaches
- Works with customer and senior engineers cross functionally to understand roadmaps, process flow, inflection points, requirements and business issues/ challenges.
- Acts as customer technology manager in the planning, data collection, analysis and reporting
- Acts as single point of contact accountable for process related customer requests
- Drives introduction and evaluation of new technologies at customer sites including new tool qualifications
|
Senior Research Engineer - Process Development for Integrated Photonics Fabrication (all genders)
- PIC Fabrication & Development:Designing, fabricating, and testing PICs.
- Platform Specialization: Focusing primarily on process development for either Aluminum Nitride (AlN) or Thin-Film Lithium Niobate (TFLN) Platform.
- Technology ownership: Owning a platform flow (AlN or TFLN) and acting as a go-to person for fabrication topics, including coordination with cleanroom/process engineering and alignment with design/test needs. This includes mentoring and knowledge transfer, proactive risk/bottleneck identification and mitigation, and contributing to roadmap/benchmarking and experimental strategy.
- DOE- Driven process development:
- Developing and integrating process modules for stable, repeatable fabrication, increasing
- Technology Readiness Level (TRL) and pilot-line readiness.
- Planning and executing Design of Experiments (DOE) to optimize processes.
- Driving process integration, stability, and performance improvements for scalable fabrication.
- Defining Process windows
- Performing data-driven root-cause analysis
- Fabrication: Hands-on work with key fabrication processes including lithography, deposition (PVD/ALD/PECVD), dry etch (ICP-RIE), metrology/SPC, and documentation/change control.
- Collaboration & Teamwork:
- Working closely with SAL’s process engineering team.
- Collaborating to ensure high fabrication fidelity.
- Supporting industry and academic collaborations within multidisciplinary projects.
- Documentation & IP:
- Reporting and thorough documentation of work.
- Contributing to IP generation and patent applications.
|
Vollzeit | Teilzeit | befristet | Praktikum
|
Vollzeit | Teilzeit | befristet | Praktikum
|
Teilzeit | befristet | Praktikum
|
Vollzeit
Obdach
10.08.2026
Obdach
Ihre Aufgaben
- Entwicklung elektronischer Neuprodukte inklusive Embedded Software (C/C++) für Robotik, Smart Home und Akku-Plattform
- Konzeption, Aufbau und Test elektronischer Baugruppen vom Prototyp bis zur Serienreife
- Entwicklung von Test- und Serviceprogrammen sowie technische Unterstützung bei Neuentwicklungen
- Mitarbeit in Projekten und Sicherstellung von Qualitäts- und Normanforderungen inklusive Auditunterstützung
|
In your career, let’s prove what’s possible.
- Perform testing, check-out, and troubleshooting using schematics, diagrams, descriptions, layouts, or defined plans.
- Tests and troubleshoots system level and component level problems in electrical and mechanical systems and sub-systems.
- Inspect materials, components, or products for surface defects and measure circuitry, using electronic test equipment, precision measuring instruments, microscope, and standard procedures.
- Conduct operational test and fault isolation on systems and equipment, help in determining methods or actions to remedy malfunctions.
- Support the design, construction, test, and check-out of test equipment.
- Use test and diagnostic equipment, including test programs, oscilloscopes, signal generators and specialized test apparatus.
- Collaborates with development engineers conducting engineering tests to collect design data or support in research efforts.
|
