In your career, let’s prove what’s possible.
- be involved in all phases of the software development (SW) lifecycle, including the testing, analysis and maintenance of the software system
- participate in the SW deployment process ensuring qualified Software Products are successfully installed at our customer's facilities
- perform troubleshooting of system software related issues
- perform in-house & onsite support of customer install base and resolution of customer issues
- test, troubleshoot and propagate errors clearly to SW and HW Development Engineers
- setup and maintain tool simulators, testing environments, lab support to reproduce issues found in field and verify SW solutions
- understand customer technology & productivity needs and feedback those requirements into software development
- prepare presentations to Lam internal stakeholders and customers travel worldwide wherever semiconductor customers are located (up to 25%
|
In your career, let’s prove what’s possible.
- Improve, and standardize test methods and test fixtures for Lam products.
- Lead test fixture transitions to suppliers, including training, documentation, and on-site support when required.
- Own supplier test and facility readiness, including test reviews, sign-off activities, and risk assessment prior to Test fixture building and transitions.
- Coordinate test fixture duplication and rebuild efforts in close collaboration with pilot team.
- Provide remote and on-site support to suppliers during test-related line-down situations to ensure rapid issue resolution.
- Verify and set up duplicated test fixtures to ensure proper functionality and compliance with requirements.
- Maintain and update test documentation and test fixture Bills of Materials (BOMs) when required.
- Drive continuous yield, quality, and process improvements through test data analysis, root cause investigations, and corrective action implementation.
- Support the introduction of new products/components, design changes, or process updates by assessing test impact and readiness at supplier sites.
- Define and maintain supplier test best practices to ensure consistency across remote factories.
- Escalate unresolved or systemic issues to Leads, or Supervisors in a timely and structured manner.
- Perform system-level and component-level electrical testing and troubleshooting.
- Utilize basic testing equipment such as multi-meter, power supply, and RS connections.
- Define and document test and diagnostic programs, including procedures to support testing of new components based on Non-Standard Request or Change Orders.
- Improve testing methods for systems and equipment throughout product development and manufacturing phases.
- Collaborate with the Manufacturing Engineering team, suppliers, account teams, and Supplier Engineering Technology (SET) members to ensure seamless integration and smooth transitions.
- Work with internal and external stakeholders to influence decisions and drive company objectives
|
Vollzeit | Teilzeit | Praktikum
|
|
|
In your career, let’s prove what’s possible.
- Instruct people from all levels of the organization, customers and others, who need to know about the entire product range; in the internal training center and world-wide; directly on location of the customer
- Apart from training courses you are also responsible for the preparation of detailed training course documentation, certification programs and furthermore also for the support of our training participants
- Conduct technical training courses for customers and/or employees in the use of complex situations for multiple products.
- Interact with customer and functional organizations to develop specifications for content of courses
- Prepare lesson plans from engineering documentation, field service requirements or software documentation. Work with engineering, technical support and manufacturing to ensure that course material reflects current product features
- Instruct participants in both classroom lectures and laboratory sessions
- Follow up to determine applicability of course material
|
In your career, let’s prove what’s possible.
- Develop and maintain factory capacity models, labor forecasts, and resource planning scenarios
- Perform data-driven analysis to identify bottlenecks and capacity constraints
- Prepare reports and recommendations for site and global stakeholders
|
In your career, let’s prove what’s possible.
- Customer Relationship Management:
Develop and maintain strong relationships with key accounts,acting as the primary technical point of contact. - Priority Alignment:
Drive alignment between account teams and clean product line on priorities formarket penetrations and defenses. - Process Optimization:
Collaborate with customers to optimize semiconductor manufacturing processes,ensuring the highest levels of efficiency and performance. - Product Demonstrations:
Organize product demonstrations and presentations to showcasethecapabilities and benefits of Lam Research technologies. - Feedback Loop:
Gather and relay customer feedback to internal teams to drive continuousimprovementand innovation in our products and services. - Training and Education:
Provide training and educational resources to customers and account teams toenhance their understanding and utilization of Lam Research technologies. - Cross-Functional Collaboration:
Work closely with sales, engineering, and product development teamsto align customer needs with company objectives.
|
In your career, let’s prove what’s possible.
- Accountable for development, verification and documentation of fluid delivery systems to meet the systems specifications
- Provides concepts and technical designs for chemical fluid systems based on modeling & calculation data
- Accountable that system meets all engineering requirements regarding Compliance and Safety Standards
- Clarification of fluid delivery requirements
- Owns execution of BOM and documentation release plan
- Technical response to meet all interface requirements with other modules and environment
- Prepare all required deliverables based on product development plan (e.g. FMEA, technical specifications, risk analyses)
- Close relationship to our suppliers an internal departments to ensure that we receive high quality-, well tested and cost saving solutions for our technical needs
- Performs engineering data analysis of mechanical and electrical aspects of the system by using of appropriate methods and tools (e.g. MATLAB, LabVIEW …
|
In your career, let’s prove what’s possible.
At Lam Research, we create equipment that drives technological advancements in the semiconductor industry. Our innovative solutions enable chipmakers to power progress in nearly all aspects of modern life, and it takes each member of our team to make it possible.
Across our organization, our employees come to work and change the world. We take on the toughest challenges with precision and accuracy. We push for the next big semiconductor breakthrough. We lead the way in one of the most critical and fast-moving industries on the planet. And we do it together, with deep connections and limitless collaboration.
The impact we have on the world is made possible by focusing on our people. So we recognize and celebrate our teams’ achievements. We strive to create an inclusive and diverse culture where everyone’s contribution and voice has value. We evaluate and evolve our offerings, so our people receive the support and empowerment to do meaningful things for their lives, careers, and communities.
Because at Lam, we believe that when people are the priority and they’re inspired to unleash the power of innovation for a better world together, anything is possible.
|
In your career, let’s prove what’s possible.
- Serve as single point accountability for critical escalations business/customer critical escalations, ensuring timely, transparent communication and resolution.
- Assess escalation across technical, operational and commercial dimensions to balance priority across the team.
- Accurately document incidents, containment, root cause, and decisions.
- Cross-functional leadership without direct authority
|
In your career, let’s prove what’s possible.
- Designs, develops and manages activities for a specific product or group of products from the beginning to the end: product definition and planning through production, release and end of product line
- Technical counseling of internal teams on product design and configuration to accommodate customer requirements
- Serves as the central resource for Clean Tools with design, process, manufacturing, test, quality and marketing as the product(s) move to production and distribution
- Leads internal meetings and workshops with the product ownership-team and keeps the management informed about the results
- Involvement lasts throughout all stages of a product’s lifecycle including modifications, upgrades and maintenance of the product or product line
|
In your career, let’s prove what’s possible.
- Build production-grade Python packages.
- Follow and build project scaffolds (PowerShell), follow coding standards, and reproducible workflows.
- Transform analyses into standardized currently best-known methods (cBKM)
- Process data and automate data flows; manage and optimize data structure & data bases for big data sets.
- Interact with product and service teams to identify questions and issues for data analysis and experiments.
- Interpret and communicate data analysis results and experiments to product, service & business managers.
- Design, build and maintain dashboards.
- Process confidential data and information according to guidelines.
- Support to setup iterating reports, analysis and dashboards.
|
In your career, let’s prove what’s possible.
- Design, develop, troubleshoot, and debug software programs for enhancements and new products.
- Implement new customer requirements and features in our existing application.
- Maintain and enhance existing code base by investigating and resolving problem areas.
- Demonstrate solutions through clear documentation, flowcharts, and well-structured code.
- Collaborate with cross functional teams to design and develop software programs.
- Provide technical guidance and mentoring for more junior engineers.
- May visit customer site to provide support and have ability to travel (total is less than 10%).
|
In your career, let’s prove what’s possible.
- Designs, develops, and implements cost-efficient methods to test and troubleshoot systemsand equipment for all phases of product development and manufacturing.
- Prepares test and diagnostic programs, designs test fixtures and equipment, and documentsspecifications and procedures for new products.
- Plans labor, cost, timeline, and equipment required for testing
- Managing of work packages for Lam internal and external resources, who supports with testfixture design and ATAC coding
- Transfer test fixtures to suppliers (including traveling and training)
- Off- and On-side support for supplier
- Support Manufacturing Engineering activities like assembly instruction creation, BOM andassembly verification for specific programs
- Implement new ideas and defining new ways of testing to reduce costs and test time
|
Vollzeit
Porto, Klagenfurt, Villach, München
21.07.2026
Porto, Klagenfurt, Villach, München
|
In your career, let’s prove what’s possible.
- Design and prepare test fixtures\equipment and executes the test followed by data evaluation
- Test set-up and execution for
- Components/Devices
- Systems/Tools
- Execution of tests
- Start-up of test stand
- Handling of related components
- Operating various measurement systems
- Structured diagnostic and problem-solving methods must be used during start-up and LAB testing
- Apply statistical methods for specification of reliability tests and data evaluation
- Create test documentation based on our standards and meaningful presentation of results
- Active cooperation with other colleagues on test stand or tool in our test floors or in our clean room laboratory and handling of acids
- Forward change requests / improvement suggestions to the developer in charge
|
In your career, let’s prove what’s possible.
- Customer Relationship Management: Develop and maintain strong relationships with key accounts, acting as the primary technical point of contact.
- Priority Alignment: Drive alignment between account teams and clean product line on priorities for market penetrations and defenses.
- Process Optimization: Collaborate with customers to optimize semiconductor manufacturing processes, ensuring the highest levels of efficiency and performance.
- Product Demonstrations: Organize product demonstrations and presentations to showcasethe capabilities and benefits of Lam Research technologies.
- Feedback Loop: Gather and relay customer feedback to internal teams to drive continuousimprovement and innovation in our products and services.
- Training and Education: Provide training and educational resources to customers and account teams to enhance their understanding and utilization of Lam Research technologies.
- Cross-Functional Collaboration: Work closely with sales, engineering, and product development teams to align customer needs with company objectives.
|
In your career, let’s prove what’s possible.
- Perform testing, check-out, and troubleshooting using schematics, diagrams, descriptions, layouts, or defined plans.
- Tests and troubleshoots system level and component level problems in electrical and mechanical systems and sub-systems.
- Inspect materials, components, or products for surface defects and measure circuitry, using electronic test equipment, precision measuring instruments, microscope, and standard procedures.
- Conduct operational test and fault isolation on systems and equipment, help in determining methods or actions to remedy malfunctions.
- Support the design, construction, test, and check-out of test equipment.
- Use test and diagnostic equipment, including test programs, oscilloscopes, signal generators and specialized test apparatus.
- Collaborates with development engineers conducting engineering tests to collect design data or support in research efforts.
|
In your career, let’s prove what’s possible.
- Customer Relationship Management: Develop and maintain strong relationships with key accounts, acting as the primary technical point of contact.
- Priority Alignment: Drive alignment between account teams and clean product line on priorities for market penetrations and defenses.
- Process Optimization: Collaborate with customers to optimize semiconductor manufacturing processes, ensuring the highest levels of efficiency and performance.
- Product Demonstrations: Organize product demonstrations and presentations to showcasethe capabilities and benefits of Lam Research technologies.
- Feedback Loop: Gather and relay customer feedback to internal teams to drive continuousimprovement and innovation in our products and services.
- Training and Education: Provide training and educational resources to customers and account teams to enhance their understanding and utilization of Lam Research technologies.
- Cross-Functional Collaboration: Work closely with sales, engineering, and product development teams to align customer needs with company objectives.
|
In your career, let’s prove what’s possible.
- Responsible for performing professional process engineering research, development and evaluation in semiconductor environment
- Reviews processing techniques and methods applied in the manufacture, fabrication and evaluation of products including in-house lab demonstrations
- Conceives and plans projects involving definition and selection of new concepts and approaches
- Works with customer and senior engineers cross functionally to understand roadmaps, process flow, inflection points, requirements and business issues/ challenges.
- Acts as customer technology manager in the planning, data collection, analysis and reporting
- Acts as single point of contact accountable for process related customer requests
- Drives introduction and evaluation of new technologies at customer sites including new tool qualifications
|
In your career, let’s prove what’s possible.
- Responsible for performing professional process engineering research, development, and evaluation in support of the company’s complex semiconductor capital equipment and systems.
- Reviews processing techniques and methods applied in the manufacture, fabrication and evaluation of products. Involvement may begin at any step from pilot plant to full-scale manufacturing.
- Conceives and plans projects involving definition and selection of new concepts and approaches in the processing or development of new processes.
- Compiles and evaluates test data to determine appropriate limits and variables for process specifications.
- Supports customer technology managers in the planning, data collection, analysis, and reporting of customer demos to defend existing process applications.
- Drives the adoption of new technology at the customer site. Works closely with customer to demonstrate and introduce new technologies at customer sites through demos, on site evaluations, and new tool qualifications.
- Works with customer and senior engineers cross functionally to understand roadmaps, process flow, inflection points, requirements and business issues/ challenges.
- Works with suppliers to make sure required parts and supplies are available
- Contributes to product development and release activities.
- May act as CTM-single point of contact accountable for process related requests.
|
In your career, let’s prove what’s possible.
- Responsible for performing professional process engineering research, development and evaluation in semiconductor environment
- Reviews processing techniques and methods applied in the manufacture, fabrication and evaluation of products including in-house lab demonstrations
- Conceives and plans projects involving definition and selection of new concepts and approaches
- Works with customer and senior engineers cross functionally to understand roadmaps, process flow, inflection points, requirements and business issues/ challenges.
- Acts as customer technology manager in the planning, data collection, analysis and reporting
- Acts as single point of contact accountable for process related customer requests
- Drives introduction and evaluation of new technologies at customer sites including new tool qualification
|
In your career, let’s prove what’s possible.
- Design and deliver self‑healing automation that proactively detects common failure conditions, automatically remediates known issues, and prevents incident recurrence
- Architect and operate one‑click resolution workflows that standardize recovery actions and significantly reduce dependency on manual intervention
- Design, implement, and maintain DevOps‑based automation for software packaging, deployment, and lifecycle management across corporate client endpoints
- Build and own CI/CD pipelines to ensure automation is versioned, tested, secure, and deployed reliably at scale
- Create and maintain robust scripts, tooling, and automation frameworks to eliminate manual operational effort and reduce MTTR
- Integrate automation and remediation logic with endpoint management, monitoring, and alerting platforms to enable event‑driven remediation
- Analyze incident trends and operational pain points to identify and prioritize high‑impact self‑healing use cases
- Partner with Client Services, Security, and other operations teams to align automation outcomes with reliability and risk objectives
- Continuously improve automation coverage, effectiveness, and resilience through metrics, operational feedback, and iterative enhancement
- Document automation solutions, remediation logic, and operational runbooks to support consistent adoption and long‑term maintainability
|
In your career, let’s prove what’s possible.
- Is the lead engineer of a development program (product), making sure that mechanical and electrical hardware and the tool software work together to meet the system specification
- Owns developing the system specification based on the product specification and configuration options
- Is accountable for resolving design tradeoffs/conflicts to ensure the design is integrated, such that the overall product performs as described in the system specification
- Assures that the system meets engineering- and compliance standards, especially in the concept and detailed design phases
- Owns BOM (bill of material) setup and execution of the documentation release plan
- Prepares all required program/product related Engineering deliverables (e.g. FMEA, technical specifications, risk analyses)
- Technical responsible that all interfaces for the entire product are well defined and working
- Participates in the cost allocation model and assures that designs meet the cost targets
- Owns developing the reliability allocation model, the reliability design approach and test plans
|
In your career, let’s prove what’s possible.
- Design, develop, and maintain electrical and electronic circuits throughout all phases of the product lifecycle.
- Drive component selection, circuit development, design verification, testing, and evaluation of control systems for our products.
- Collaborate closely with a multidisciplinary engineering team, including electrical, mechanical, and software engineers, technical support specialists, productivity engineers, and external suppliers, to design, develop, and enhance custom and OEM components.
- Develop, execute, and analyze test plans and procedures to ensure technical and operational requirements are fully met, validated, and documented.
- Collect, evaluate, and present technical data and findings to support informed decision-making during design, project, and program reviews.
|
In your career, let’s prove what’s possible.
- Perform reporting, analysis, forecasting, and closing activities related to operating expenses and gross margin.
- Analyse actual system gross margin (OCOGS, I&W) and prepare detailed variance analyses versus forecasts, including commentary for Product line forecasts.
- Partner closely with Operations to develop machine-level gross margin forecasts for regular forecast submissions.
- Support revenue recognition by gathering relevant data and acting as a subject matter expert on revenue recognition and I&W policies.
- Contribute to finance projects led by corporate divisions.
- Ensure timely and accurate reporting in line with company standards and deadlines.
|
In your career, let’s prove what’s possible.
- Creation of initial BOM Structure for Development Programs according to the Product Option Architecture
- Implementation and release of new options and features on released Spin Clean products
- Driving releases from development state to HVM Lifecycle
- Preparing Bill of Materials for automated BOM Creation (SAP Item Text rules)
- Maintaining Bill of Materials via engineering change management process (ECM) and structure components according to manufacturing procedures
- Working with cross functional teams on product integration and maintenance
- being the engineering interface to Product- and configuration Management
- Acting as the Single point of contact for Problem Reports (and escalations) from remote factory and on-site production for BOM related questions
- Executing FMEA’s (Failure Mode and effects analysis) – Act as the moderator – leading a cross functional team of experts to identify risks and error cases of modules currently in development. Presents results in a CFT meeting (including executive management)
|
In your career, let’s prove what’s possible.
- Design, develop, and maintain analogue and digital electronic circuits throughout the complete product lifecycle
- Perform component selection, schematic capture, circuit simulation, and PCB design to meet performance, cost, and reliability targets
- Drive technical requirements from concept through implementation, test, and release
- Collaborate with mechanical, software, systems, manufacturing, quality, and service engineering teams during product development
- Support system integration activities involving sensors, actuators, communication networks, and control systems
- Create and maintain engineering documentation including schematics, test reports, BOMs, design reviews, and technical specifications
|
In your career, let’s prove what’s possible.
- Delivers commitment and communication of delivery dates for all assigned systems (Manufacturing Completion Date)
- Drives and coordinates gap reductions between planned- and actual milestones
- Tracks system readiness and provide early warnings/gaps that may affect commitments and pursue all necessary escalation steps
- Serves as deputy to the Area Manager and assumes functional leadership responsibilities as subject matter expert
- Works with Sales Operations, Configuration Support and Engineering to assure design readiness to support overall project timelines, especially Special Customer Requests
- Coordinates timelines with Engineering, Program Management and Pilot operations for new products and customer Evaluation Requests (EVRs)
- Performs continuous System Lead Time Assessment – working with a cross functional team to assess complexity level of a slotted tool and suggest a proper lead time
- Cooperates within Change Management processes – assessing impact of changes on delivery commitments, such as late configuration changes and Manufacturing slot changes
- Engages in Escalation and resolution of issues affecting timely delivery of assigned systems and modules from Remote Factories
- Monitoring shipping acceptance according to required configuration and QA standards
- Ensures closure and completion of open deviation items, participation to cross functional teams, aimed to improving processes related to all of the above (root cause corrective action and process gap awareness)
|
In your career, let’s prove what’s possible.
- Own the cloud platform reference architecture and roadmaps across AWS and Azure; align with enterprise architecture, security, data, and app teams.
- Define and maintain golden paths (IaC modules, pipeline templates, reference stacks) for common workloads (containers, serverless, data, analytics, batch).
- Establish multi-cloud landing zones (AWS Organizations + Control Tower; Azure Management Groups + Landing Zones) with policy, identity, and network guardrails.
|
