Senior Research Engineer – Quantum Photonic Integrated Circuit Design and PDK development (all genders)
- Designing photonic integrated circuits (passive components and modulators) for quantum applications based on AlN.
- Contributing to the development and validation of PDK components, including layout, simulation, and documentation.
- Generating layout from design and performing design rule checks
- Characterizing fabricated devices in the lab (optical/electrical testing) and analyzing measurement data
- Designing improvements based on characterization results to enhance device performance and yield
- Collaborating closely with process and fabrication teams to ensure high design-to-fab fidelity
- Contributing to reporting, documentation, publication, IP generation, and patent application
- Supporting industry and academic collaborations within multidisciplinary projects
|
|
|
Senior Scientist - Ion-trap chips (all genders)
- Establishment of infrastructure and set-ups for testing and operation of ion trap devices and development of ion trap systems for Quantum technology applications.
- Coordination and alignment of internal efforts and activities with industrial and academic partners in the pilot line.
- Contribution to design, simulation and characterization of new ion trap chips.
- Dissemination, communication and reporting of research findings to both scientific and non-scientific audiences.
- Supervision of students.
- Activities in relevant networks.
- Project management.
- Project and funding acquisition.
|
befristet | Leasing, Zeitarbeit
|
Senior Research Engineer – Nitride Thin-Film Materials (Wide Band Gap) (all genders)
- Development of thin films for piezoelectric and wide-band-gap applications.
- Design and execute experiments to optimize nitride thin film materials, guided by device specifications and performance feedback.
- Structural and functional (e.g. dielectric, electrical, ferroelectric) characterization of the deposited thin films.
- Collaboration with design, fabrication, characterization, and process engineer teams to optimize full process flow and device performance.
- Definition of strategies for material optimization and pursuing scientifically relevant investigations.
- Development of strategies to address novel material properties and novel fields of application.
- Contributing to the standardization of procedures and workflows within the Unit.
- Filing IP disclosures whenever possible and appropriate.
- Contribution to scientific dissemination (publications in high-impact peer-reviewed journals, presentations at conferences).
- Contribution to Unit workflows, project acquisition and project management.
- Position is offered within the Chips JU Pilot Lines.
|
Senior Research Engineer - Process Development for Integrated Photonics Fabrication (all genders)
- PIC Fabrication & Development:Designing, fabricating, and testing PICs.
- Platform Specialization: Focusing primarily on process development for either Aluminum Nitride (AlN) or Thin-Film Lithium Niobate (TFLN) Platform.
- Technology ownership: Owning a platform flow (AlN or TFLN) and acting as a go-to person for fabrication topics, including coordination with cleanroom/process engineering and alignment with design/test needs. This includes mentoring and knowledge transfer, proactive risk/bottleneck identification and mitigation, and contributing to roadmap/benchmarking and experimental strategy.
- DOE- Driven process development:
- Developing and integrating process modules for stable, repeatable fabrication, increasing
- Technology Readiness Level (TRL) and pilot-line readiness.
- Planning and executing Design of Experiments (DOE) to optimize processes.
- Driving process integration, stability, and performance improvements for scalable fabrication.
- Defining Process windows
- Performing data-driven root-cause analysis
- Fabrication: Hands-on work with key fabrication processes including lithography, deposition (PVD/ALD/PECVD), dry etch (ICP-RIE), metrology/SPC, and documentation/change control.
- Collaboration & Teamwork:
- Working closely with SAL’s process engineering team.
- Collaborating to ensure high fabrication fidelity.
- Supporting industry and academic collaborations within multidisciplinary projects.
- Documentation & IP:
- Reporting and thorough documentation of work.
- Contributing to IP generation and patent applications.
|
Senior Research Engineer – Technology development and process integration for MEMS-based applications (all genders)
- Technology development for MEMS-based devices in various fields such as optics, acoustic, inertial sensors from concept to prototype.
- Development and implementation of DOE to improve device performance.
- Microfabrication and prototyping in cleanroom facility by using 200 mm wafer level technology.
- Advanced testing of developed MEMS devices (electrical, mechanical, acoustic, …).
- Scientific communication / reporting of research results.
|
R&D Process Engineer - Thin Film Deposition (all genders)
- Develop, monitor, and optimize thin film deposition processes (primarily sputtering) to support R&D and prototype fabrication.
- Maintain tool health and stability through performance tracking, SPC monitoring, and preventive maintenance coordination.
- Support researcher use of deposition tools, ensuring safe operation, consistent process quality, and compliance with FAB standards.
- Lead and assist in tool upgrades, process capability improvements, and new equipment evaluation or acquisition.
- Document process parameters, tool performance, and experiment outcomes to ensure traceability and knowledge sharing.
- Serve as the technical interface between the fabrication team and research groups to enable efficient process development and experimentation.
|
In your career, let’s prove what’s possible.
- Market Analysis and Forecasting: Develop and maintain forecast models for existing and new market segments. Maintain application matrix database.
- Market Strategy: Develop and execute product marketing strategies to drive awareness, demand, and adoption of Lam’s products. Collaborate with cross-functional teams to align marketing efforts with business goals.
- Product Positioning: Craft compelling product narratives, positioning, and messaging. Understand customer needs, competitive landscape, and industry trends to create impactful marketing content.
- Customer Insights: Gather insights from customers, sales teams, product line teams and market research. Use data to refine marketing strategies and improve product positioning.
- Collaboration: Work closely with product management, business development, account technologist, engineering, and sales teams. Be the bridge between technical details and customer benefits.
|
In your career, let’s prove what’s possible.
- Customer Relationship Management: Develop and maintain strong relationships with key accounts, acting as the primary technical point of contact.
- Priority Alignment: Drive alignment between account teams and clean product line on priorities for market penetrations and defenses.
- Process Optimization: Collaborate with customers to optimize semiconductor manufacturing processes, ensuring the highest levels of efficiency and performance.
- Product Demonstrations: Organize product demonstrations and presentations to showcasethe capabilities and benefits of Lam Research technologies.
- Feedback Loop: Gather and relay customer feedback to internal teams to drive continuousimprovement and innovation in our products and services.
- Training and Education: Provide training and educational resources to customers and account teams to enhance their understanding and utilization of Lam Research technologies.
- Cross-Functional Collaboration: Work closely with sales, engineering, and product development teams to align customer needs with company objectives.
|
In your career, let’s prove what’s possible.
- Customer Relationship Management:
Develop and maintain strong relationships with key accounts,acting as the primary technical point of contact. - Priority Alignment:
Drive alignment between account teams and clean product line on priorities formarket penetrations and defenses. - Process Optimization:
Collaborate with customers to optimize semiconductor manufacturing processes,ensuring the highest levels of efficiency and performance. - Product Demonstrations:
Organize product demonstrations and presentations to showcasethecapabilities and benefits of Lam Research technologies. - Feedback Loop:
Gather and relay customer feedback to internal teams to drive continuousimprovementand innovation in our products and services. - Training and Education:
Provide training and educational resources to customers and account teams toenhance their understanding and utilization of Lam Research technologies. - Cross-Functional Collaboration:
Work closely with sales, engineering, and product development teamsto align customer needs with company objectives.
|
In your career, let’s prove what’s possible.
- Responsible for performing professional process engineering research, development and evaluation in semiconductor environment
- Reviews processing techniques and methods applied in the manufacture, fabrication and evaluation of products including in-house lab demonstrations
- Conceives and plans projects involving definition and selection of new concepts and approaches
- Works with customer and senior engineers cross functionally to understand roadmaps, process flow, inflection points, requirements and business issues/ challenges.
- Acts as customer technology manager in the planning, data collection, analysis and reporting
- Acts as single point of contact accountable for process related customer requests
- Drives introduction and evaluation of new technologies at customer sites including new tool qualifications
|
In your career, let’s prove what’s possible.
- Responsible for performing professional process engineering research, development, and evaluation in support of the company’s complex semiconductor capital equipment and systems.
- Reviews processing techniques and methods applied in the manufacture, fabrication and evaluation of products. Involvement may begin at any step from pilot plant to full-scale manufacturing.
- Conceives and plans projects involving definition and selection of new concepts and approaches in the processing or development of new processes.
- Compiles and evaluates test data to determine appropriate limits and variables for process specifications.
- Supports customer technology managers in the planning, data collection, analysis, and reporting of customer demos to defend existing process applications.
- Drives the adoption of new technology at the customer site. Works closely with customer to demonstrate and introduce new technologies at customer sites through demos, on site evaluations, and new tool qualifications.
- Works with customer and senior engineers cross functionally to understand roadmaps, process flow, inflection points, requirements and business issues/ challenges.
- Works with suppliers to make sure required parts and supplies are available
- Contributes to product development and release activities.
- May act as CTM-single point of contact accountable for process related requests.
|
In your career, let’s prove what’s possible.
- Responsible for performing professional process engineering research, development and evaluation in semiconductor environment
- Reviews processing techniques and methods applied in the manufacture, fabrication and evaluation of products including in-house lab demonstrations
- Conceives and plans projects involving definition and selection of new concepts and approaches
- Works with customer and senior engineers cross functionally to understand roadmaps, process flow, inflection points, requirements and business issues/ challenges.
- Acts as customer technology manager in the planning, data collection, analysis and reporting
- Acts as single point of contact accountable for process related customer requests
- Drives introduction and evaluation of new technologies at customer sites including new tool qualification
|
In your career, let’s prove what’s possible.
- Allgemeine Lagertätigkeiten
- Audit für fertige Kundenaufträge vor Auslieferung
- Kontrolle von Vollständigkeit, Verpackung und Richtigkeit der Lieferungen
- Ausführung physischer Aufgaben in Verbindung mit der Einlagerung, Kommissionierung und Verteilung von Waren
- Heben von schweren Gegenständen (bis zu 15 kg) und Bedienung eines Gabelstapler
|
In your career, let’s prove what’s possible.
- Design, develop, and maintain electrical and electronic circuits throughout all phases of the product lifecycle.
- Drive component selection, circuit development, design verification, testing, and evaluation of control systems for our products.
- Collaborate closely with a multidisciplinary engineering team, including electrical, mechanical, and software engineers, technical support specialists, productivity engineers, and external suppliers, to design, develop, and enhance custom and OEM components.
- Develop, execute, and analyze test plans and procedures to ensure technical and operational requirements are fully met, validated, and documented.
- Collect, evaluate, and present technical data and findings to support informed decision-making during design, project, and program reviews.
|
In your career, let’s prove what’s possible.
- Design, develop, and maintain analogue and digital electronic circuits throughout the complete product lifecycle
- Perform component selection, schematic capture, circuit simulation, and PCB design to meet performance, cost, and reliability targets
- Drive technical requirements from concept through implementation, test, and release
- Collaborate with mechanical, software, systems, manufacturing, quality, and service engineering teams during product development
- Support system integration activities involving sensors, actuators, communication networks, and control systems
- Create and maintain engineering documentation including schematics, test reports, BOMs, design reviews, and technical specifications
|
In your career, let’s prove what’s possible.
- Provide service, maintenance, and repair support for advanced high-tech equipment at customer sites.
- Troubleshoot technical issues and identify root causes of equipment failures.
- Install, start up, and relocate equipment when required.
- Perform diagnostics and implement solutions to minimize downtime.
- Support equipment upgrades and engineering changes.
- Read and work with electrical and mechanical drawings, diagrams, and manuals.
- Maintain accurate service and project documentation.
- Collaborate with customers and internal teams to ensure excellent service.
- Support and execute smaller technical projects and gradually take ownership of more complex tasks.
|
In your career, let’s prove what’s possible.
- Responsible for providing quality on-site repair and maintenance service of complex electro-mechanical systems.
- Analytical troubleshooting of technical problems to component level.
- Performs complete installation/relocation start-up services
- Troubleshoot equipment problems and conduct diagnostic procedures to isolate problems and take steps to minimize downtime or system interruptions and eliminate equipment malfunctions. Determine corrective actions as required.
- Installations and/or relocations of equipment at customers’ sites.
- Remain up to date on equipment/tools through appropriate training, manuals, factory periodicals and other relevant materials.
- Assist in complex field modifications and updates as released in Engineering Change Notifications.
- Maintain records and reports as required to properly coordinate activities with supervisors and customers.
- Planning, management, and execution of projects of a limited scope and duration
|
In your career, let’s prove what’s possible.
- Perform reporting, analysis, forecasting, and closing activities related to operating expenses and gross margin.
- Analyse actual system gross margin (OCOGS, I&W) and prepare detailed variance analyses versus forecasts, including commentary for Product line forecasts.
- Partner closely with Operations to develop machine-level gross margin forecasts for regular forecast submissions.
- Support revenue recognition by gathering relevant data and acting as a subject matter expert on revenue recognition and I&W policies.
- Contribute to finance projects led by corporate divisions.
- Ensure timely and accurate reporting in line with company standards and deadlines.
|
In your career, let’s prove what’s possible.
- be involved in all phases of the software development (SW) lifecycle, including the testing, analysis and maintenance of the software system
- participate in the SW deployment process ensuring qualified Software Products are successfully installed at our customer's facilities
- perform troubleshooting of system software related issues
- perform in-house & onsite support of customer install base and resolution of customer issues
- test, troubleshoot and propagate errors clearly to SW and HW Development Engineers
- setup and maintain tool simulators, testing environments, lab support to reproduce issues found in field and verify SW solutions
- understand customer technology & productivity needs and feedback those requirements into software development
- prepare presentations to Lam internal stakeholders and customers travel worldwide wherever semiconductor customers are located (up to 25%
|
In your career, let’s prove what’s possible.
- Creation of initial BOM Structure for Development Programs according to the Product Option Architecture
- Implementation and release of new options and features on released Spin Clean products
- Driving releases from development state to HVM Lifecycle
- Preparing Bill of Materials for automated BOM Creation (SAP Item Text rules)
- Maintaining Bill of Materials via engineering change management process (ECM) and structure components according to manufacturing procedures
- Working with cross functional teams on product integration and maintenance
- being the engineering interface to Product- and configuration Management
- Acting as the Single point of contact for Problem Reports (and escalations) from remote factory and on-site production for BOM related questions
- Executing FMEA’s (Failure Mode and effects analysis) – Act as the moderator – leading a cross functional team of experts to identify risks and error cases of modules currently in development. Presents results in a CFT meeting (including executive management)
|
In your career, let’s prove what’s possible.
- Design and implement enterprise observability strategies across cloud, infrastructure, applications, and platforms.
- Build telemetry pipelines that ingest logs, metrics, traces, events, and topology information.
- Deploy and tune observability platforms to improve operational visibility and service reliability.
- Develop AIOps capabilities including anomaly detection, event correlation, noise reduction, and predictive insights.
- Partner with SRE, platform engineering, cybersecurity, and service operations teams to identify key operational signals.
- Create dashboards, service maps, operational scorecards, and SLO-driven reporting.
- Integrate observability data into AI agents, automation workflows, and operational platforms.
- Establish telemetry standards and observability engineering best practices.
- Drive continuous improvements in MTTD, MTTR, and service health monitoring.
|
In your career, let’s prove what’s possible.
- Lead the design and implementation of Lam's Agent Platform and Internal Developer Platform.
- Build and operate the cloud-native infrastructure supporting AI agents and automation services.
- Establish platform engineering standards, reusable templates, golden paths, and self-service capabilities.
- Implement GitOps, Infrastructure as Code, policy-as-code, and secure software delivery practices.
- Design deployment pipelines, observability standards, operational controls, and runtime governance.
- Partner with architects, SRE teams, and application teams to onboard services onto the platform.
- Define scalability, reliability, and resiliency requirements for enterprise automation workloads.
- Drive adoption of cloud-native engineering practices across the organization.
- Mentor engineers and build platform engineering excellence.
|
In your career, let’s prove what’s possible.
- Define the enterprise architecture and technology strategy for Agentic AI, AIOps, autonomous operations, and intelligent automation.
- Establish architectural standards, design patterns, and governance frameworks for AI agents and multi-agent systems.
- Design the integration architecture connecting agents to enterprise systems including ServiceNow, cloud platforms, observability platforms, CMDB, developer platforms, and security tooling.
- Develop reference architectures for AI-powered incident response, service management, platform operations, FinOps, cybersecurity, and disaster recovery.
- Partner with executives and technology leaders to align agentic capabilities with business and operational priorities.
- Evaluate emerging technologies, frameworks, and vendors in AI, automation, platform engineering, and cloud-native ecosystems.
- Define policies, controls, and approval models that enable safe autonomous operations.
- Drive architecture reviews and technical governance across multiple engineering and operations teams.
- Mentor engineers and architects while fostering innovation and best practices.
|
In your career, let’s prove what’s possible.
- Designs, develops, and implements cost-efficient methods to test and troubleshoot systemsand equipment for all phases of product development and manufacturing.
- Prepares test and diagnostic programs, designs test fixtures and equipment, and documentsspecifications and procedures for new products.
- Plans labor, cost, timeline, and equipment required for testing
- Managing of work packages for Lam internal and external resources, who supports with testfixture design and Python coding
- Transfer test fixtures to suppliers (including traveling and training)
- Off- and On-side support for supplier
- Support Manufacturing Engineering activities like assembly instruction creation, BOM andassembly verification for specific programs
- Implement new ideas and defining new ways of testing to reduce costs and test time
|
Vollzeit | Leasing, Zeitarbeit
In your career, let’s prove what’s possible.
- Support the full life cycle of mechanical and electro-mechanical systems from concept to productizationincluding conceptualization, designing, CAD modeling, development, and test/validation.
- Designs components using variety of metals, ceramics, quartz, plastics, and advanced coatings.
- Ensure documentation aligns with SEMI, Lam standards, and industry best practices for geometricdimensioning and tolerancing (GD&T).
- Conduct detailed analysis including structural, finite element analysis (FEA), thermal, heat transfer, stress,vibrations, fluid and gas flow dynamics, and manufacturability to properly specify designs.
- Conduct feasibility studies and test plans to characterize and validate design performance.
- Prepare high-quality reports and technical presentations to clearly communicate design intent, evaluationand validation to a diverse audience in design reviews.
- Collaborate with suppliers and internal teams to ensure solutions can be manufactured with high-quality,cost-optimized, and to requirements.
- Provide key deliverables including Failure Modes and Effects Analysis (FMEA), technical specifications,risk analysis, test specifications, and design review presentations
|
In your career, let’s prove what’s possible.
- Program Leadership: Develop and manage a global process for order readiness and preslot milestone mgmt in alignment with Production Planning initiatives.
- Cross Functional Collaboration: Partner with Regional Sales Operations, Product Groups, NSR Engineering, and internal Order Fulfillment teams to ensure timely configuration and quote completion.
- Risk Management: resolve readiness issue impacting slotting schedule & utilize the Lam Mgmt System (LMS) to drive for timely resolution & decision-making.
- Order Readiness Mgmt: Validate configuration accuracy and completeness for all orders prior to slotting & enforce adherence to pre-slot milestones for all records globally.
- Communications: Develop and deliver clear and concise communications for leadership teams and stakeholders.
- Tracking & Reporting: Develop dashboards and reporting tools to track progress against milestones and provide visibility to leadership on risks, delays, & corrective actions.
- Process Improvement: Identify gaps in order readiness processes and implement best practices for efficiency and accuracy, leveraging SAP & production planning tools & applications.
|
In your career, let’s prove what’s possible.
- Develop inspection techniques and metrology recipes supporting the data generation andanalysis for the customer demo support.
- Independently design and conduct experiments, developing tailored analytical methodologies, supporting product development’s engineering testing.
- Plan, carry and oversee complex metrology related projects, documenting results and lessonslearned in BKM.
- Analyze the metrology equipment’s performance and partner with the suppliers on problemsolving and CIP.
- Schedule and organize the needed preventive maintenances and calibrations.
- Support the development of the site’s metrology roadmap, identifying current gaps through the cooperation with the engineering teams, align on the future technical requirements, and setup the implementation strategies.
- Engage with analytical laboratories and wafers suppliers to extend the available engineering testing offer.
|
Vollzeit | Leasing, Zeitarbeit
In your career, let’s prove what’s possible.
- Conduct measurements, inspections, and SEM investigations to generate, evaluate, and interpret data in support of customer demonstrations.
- Perform periodic checks of metrology tools using Statistical Process Control (SPC) methods, ensuring they remain within specified limits and deliver consistent output.
- Participate in the planning and coordination of preventive maintenance and calibration activities.
- Serve as the point of contact for equipment suppliers and laboratory visitors during troubleshooting and improvement activities.
- Support metrology engineers in carrying out specialized metrology and analytical tasks.
|
