At a glance
- Get experience with Digital and Mixed-Signal integrated circuits
- Get experience with state of the art design preparation and provisioning techniques
- Get hands-on experience with verifying design data quality
- Get familiar with the Infineon chip development flow and the 3rd Party IP Lifecycle
- Contribute to the automation enhancements of the 3rd Party IP provision flow
|
At a glance
- Assist engineers in system board design and verification of high power density and innovative solutions in DCDC power conversion
- Build evaluation kits and perform system function verification and testing
- Prepare design documentation, application notes and getting started guides for various solutions developed
- Acquire knowledge and methodology in system design, trouble shooting and analysis
- Analyze test results and document the outcomes
- Collaborate and contribute to development projects
|
At a glance
- Get experience with Mixed-Signal High Speed, RF and mmWave and Integrated Circuits.
- Get experience with measurements related to High-Speed PLLs and Data Communication: Jitter, Eye Diagram, BERT.
- Get experience with high-end RF/mmWave measurement equipment.
- Get hand-on experience in Validation and Debugging.
- Design of PCBs for the measurement of products
- Prototype and evaluate new tools and methodologies.
- Familiarize yourself with Validation flow: definition of appropriate measurement setup, automation, data post-processing and analysis.
|
At a glance
- Solid C-programming skills
- Familiarity with 32-bit microcontrollers: architecture, memory, peripherals
- RTOS basic knowledge (required)
- Good English skills
|
Vollzeit | befristet | Praktikum
At a glance
- Analog blocks in Infineon microcontrollers
- Analog to Digital (ADC) and Digital to Analog (DAC) converters
- High speed interfaces
- High Precision Oscillators and PLLs
- Power Management Systems (PMS)
- Battery Management Systems (BMS)
- DCDC Converter for low voltage applications and Linear Voltage Regulators (LDOs)
- RF blocks for radar systems
- Bias & Control circuits for 5G antennas
|
Your Tasks
- Teaching in the field of power electronic components, systems and circuits, as well as associated advising and mentoring of students with an interest in incorporating sustainable and green technologies in power electronics
- Supervision of students at Bachelor and Master levels
- Independent research in industrial power electronics with the aim of leading a research group
- Acquisition and management of national and international funded projects
- Taking on organizational and administrative activities (part of academic self-administration)
- Contribution to the professional profiling and further development of the study programs
- Representing the university in regional and international partnerships and in cooperation with public administra- tion, business, and the scientific community
|
At a glance
- Lead the design of cutting-edge RF systems
- Acquire deep understanding of customer needs and lead the technical design accordingly
- Work close with concept, digital, verification engineers in order to achieve highest synergies in targets and quality
- Lead innovation projects to push the performance RF systems through novel solutions
|
In your career, let’s prove what’s possible.
- Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam’s complex electro-mechanical and electronic systems at customer sites.
- Perform analytical problem-solving, troubleshooting, conduct diagnostics, and isolate issues to the component level, and take corrective actions to minimize downtime, system interruptions, and equipment malfunctions.
- Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification.
- Assist in complex field modifications and updates, maintaining records and reports to coordinate activities between Lam and the customer.
- Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction.
- Troubleshoot and create customer response action plans to support customer needs.
- Transparently discuss opportunities and challenges with customer to increase trust.
- Provide technical instruction and mentoring for more junior engineers.
|
In your career, let’s prove what’s possible.
- Troubleshooting and regular maintenance of the lab equipment
- Mechanical and electrical start-up of new lab tools
- Support the process engineers in executing the customer demonstrations
- Support the product development by conducting design validation tests and delivering improvement proposals
- Documents the tools configuration and reports the tests results
- Support LAB facilities and willingness to support LAB On-Call team
|
At a glance
- Be part of product development projects for our high-voltage discrete products: drive the final data sheet and other go-to-market collaterals such as application notes and evaluation boards
- Drive and support design-ins as a technical customer interface to generate business for our direct customers in close collaboration with product marketing
- Understand the challenges of our customers and how the specific value proposition of our products makes them successful
- Prepare and provide technical documentation and training on the production application level
- Be the technical person for Discrete Automotive Products for inverter applications
|
At a glance
- Maintenance and improvement of an existing development and testing environment
- Further automation of build and test processes
- Prototyping and evaluation of new tools and methodologies
|
At a glance
- Assist with daily task such as soldering components and maintaining lab equipment
- Document measurement results and debugging setups
|
In your career, let’s prove what’s possible.
- Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam’s complex electro-mechanical and electronic systems at customer sites.
- Perform analytical problem-solving, troubleshooting, conduct diagnostics, and isolate issues to the component level, and take corrective actions to minimize downtime, system interruptions, and equipment malfunctions.
- Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification.
- Assist in complex field modifications and updates, maintaining records and reports to coordinate activities between Lam and the customer.
- Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction.
- Troubleshoot and create customer response action plans to support customer needs.
- Transparently discuss opportunities and challenges with customer to increase trust.
- Provide technical instruction and mentoring for more junior engineers.
|
In your career, let’s prove what’s possible.
- Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam’s complex electro-mechanical and electronic systems at customer sites.
- Perform analytical problem-solving, troubleshooting, conduct diagnostics, and isolate issues to the component level, and take corrective actions to minimize downtime, system interruptions, and equipment malfunctions.
- Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification.
- Assist in complex field modifications and updates, maintaining records and reports to coordinate activities between Lam and the customer.
- Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction.
- Troubleshoot and create customer response action plans to support customer needs.
- Transparently discuss opportunities and challenges with customer to increase trust.
- Provide technical instruction and mentoring for more junior engineers.
|
In your career, let’s prove what’s possible.
- Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam’s complex electro-mechanical and electronic systems at customer sites.
- Perform analytical problem-solving, troubleshooting, conduct diagnostics, and isolate issues to the component level, and take corrective actions to minimize downtime, system interruptions, and equipment malfunctions.
- Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification.
- Assist in complex field modifications and updates, maintaining records and reports to coordinate activities between Lam and the customer.
- Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction.
- Troubleshoot and create customer response action plans to support customer needs.
- Transparently discuss opportunities and challenges with customer to increase trust.
- Provide technical instruction and mentoring for more junior engineers.
|
In your career, let’s prove what’s possible.
- Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services for Lam’s complex electro-mechanical and electronic systems at customer sites.
- Perform analytical problem-solving, troubleshooting, conduct diagnostics, isolate issues to the component level, and take corrective actions to minimize downtime, system interruptions, and equipment malfunctions.
- Stay up to date on semiconductor capital equipment and Lam products through learning, training, and certification.
- Assist in complex field modifications and updates, maintaining records and reports to coordinate activities between Lam and the customer.
- Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction.
- Troubleshoot and create customer response action plans to support customer needs.
- Transparently discuss opportunities and challenges with customers to increase trust.
- Provide technical instruction and mentoring for more junior engineers.
|
At a glance
- Work closely with the Chip-Package-Board CoDesign team to design, implement, test, and maintain innovative software solutions that support semiconductor design processes
- Explore and apply AI/ML algorithms to enhance automation and efficiency in Electronic Design Automation (EDA) workflows and improve Chip-Package-Board CoDesign methodologies
- Develop software solutions using Python, Java, and Cadence SKILL within the EDA framework to support advanced semiconductor design challenges
- Analyze data from design workflows to identify optimization opportunities and implement data-driven solutions using AI/ML approaches
- Create tools that integrate AI/ML-based optimizations for resource-intensive processes such as simulation, design validation, and testing
- Participate in code reviews, maintain high-quality documentation, and develop test plans to ensure robust software solutions
- Acquire skills in "Cadence SKILL" programming and apply it towards developing efficient solutions for CoDesign challenges
- Stay updated with the latest trends in software development, AI/ML, and EDA technologies, actively contributing with new ideas to improve processes
|
At a glance
- Challenging product requirements and transferring them into a cost-competitive System-on-Chip architecture
- Contributing to the definition of a common microcontroller architecture for our Power IC Products
- Collaborating with cross-functional teams in Analog/Digital Design, Verification, Firmware Development, Validation, Test, and Project Management to deliver first-pass functional silicon
- Influencing roadmaps and helping to set technology targets for future SOCs
- Being the technical interface to Product Marketing, Technical Marketing and Customers
|
