In your career, let’s prove what’s possible.
- Design and prepare test fixtures\equipment and executes the test followed by data evaluation
- Test set-up and execution for
- Components/Devices
- Systems/Tools
- Execution of tests
- Start-up of test stand
- Handling of related components
- Operating various measurement systems
- Structured diagnostic and problem-solving methods must be used during start-up and LAB testing
- Apply statistical methods for specification of reliability tests and data evaluation
- Create test documentation based on our standards and meaningful presentation of results
- Active cooperation with other colleagues on test stand or tool in our test floors or in our clean room laboratory and handling of acids
- Forward change requests / improvement suggestions to the developer in charge
|
Semiconductor Equipment Engineer (all genders)
- Independently carrying out maintenance, troubleshooting, and servicing of high-end cleanroom equipment
- Planning and coordinating preventive and corrective maintenance activities on semiconductor tools
- Supporting the continuous improvement of maintenance processes and equipment reliability within the cleanroom environment
- Performing regular inspections of cleanroom facilities and infrastructure
- Assisting the cleanroom team with daily operational and technical tasks
- Preparing and maintaining technical documentation, maintenance records, and operating procedures
- Working closely with equipment suppliers and process engineers to improve tool performance and support advanced process development
- Coordinating service activities with external vendors as well as internal stakeholders
- Supporting organizational and administrative activities within the team to ensure smooth day-to-day operations
|
|
|
In your career, let’s prove what’s possible.
- Is the lead engineer of a development program (product), making sure that mechanical and electrical hardware and the tool software work together to meet the system specification
- Owns developing the system specification based on the product specification and configuration options
- Is accountable for resolving design tradeoffs/conflicts to ensure the design is integrated, such that the overall product performs as described in the system specification
- Assures that the system meets engineering- and compliance standards, especially in the concept and detailed design phases
- Owns BOM (bill of material) setup and execution of the documentation release plan
- Prepares all required program/product related Engineering deliverables (e.g. FMEA, technical specifications, risk analyses)
- Technical responsible that all interfaces for the entire product are well defined and working
- Participates in the cost allocation model and assures that designs meet the cost targets
- Owns developing the reliability allocation model, the reliability design approach and test plans
|
Nutze diese Karrierechance!
- Linux-Administration: Verwaltung und Absicherung von Linux-basierten Systemen (Server, Red Hat-Umgebungen)
- Betrieb & Monitoring: Sicherstellung eines stabilen Betriebs, Überwachung der Systeme sowie Automatisierung von Aufgaben mit Ansible, Bash oder Python
- IT-Sicherheit & SIEM: Betreuung und Weiterentwicklung unseres SIEM-Systems zur Überwachung von Sicherheitsereignissen und Analyse von Log-Daten
- WordPress-Administration: Pflege, Updates und Absicherung unserer WordPress Websites sowie Durchführung von Backups und Performance-Optimierungen
- Support & Dokumentation: Unterstützung im 2nd- und 3rd-Level-Support sowie Erstellung und Pflege technischer Dokumentationen
|
In your career, let’s prove what’s possible.
- Responsible for performing professional process engineering research, development and evaluation in semiconductor environment
- Reviews processing techniques and methods applied in the manufacture, fabrication and evaluation of products including in-house lab demonstrations
- Conceives and plans projects involving definition and selection of new concepts and approaches
- Works with customer and senior engineers cross functionally to understand roadmaps, process flow, inflection points, requirements and business issues/ challenges.
- Acts as customer technology manager in the planning, data collection, analysis and reporting
- Acts as single point of contact accountable for process related customer requests
- Drives introduction and evaluation of new technologies at customer sites including new tool qualification
|
Nutzen Sie diese Karrierechance!
- Betreuung von Hard- und Software des Netzleitsystems (SCADA, Verteilnetzfunktionen, Outage Management, Data Warehouse)
- Unterstützung bei Netzberechnungen, Prognosen und Netzregelung
- Verwaltung und Pflege der Schnittstellen zu IT-/OT-Systemen (z. B. SAP, GIS)
- Umsetzung von IT-/OT-Sicherheitsvorgaben (ISMS, NIS)
- Entwicklung und Implementierung von Automatisierungs- und Digitalisierungslösungen im Leitsystemumfeld
- Anbindung und Integration von Anlagen- und Steuerungssystemen
- Analyse, Optimierung und Standardisierung von Datenflüssen im OT-Bereich
- Einbindung neuer Anforderungen aus dem Flexibilitätsmanagement
|
In your career, let’s prove what’s possible.
- Responsible for performing professional process engineering research, development, and evaluation in support of the company’s complex semiconductor capital equipment and systems.
- Reviews processing techniques and methods applied in the manufacture, fabrication and evaluation of products. Involvement may begin at any step from pilot plant to full-scale manufacturing.
- Conceives and plans projects involving definition and selection of new concepts and approaches in the processing or development of new processes.
- Compiles and evaluates test data to determine appropriate limits and variables for process specifications.
- Supports customer technology managers in the planning, data collection, analysis, and reporting of customer demos to defend existing process applications.
- Drives the adoption of new technology at the customer site. Works closely with customer to demonstrate and introduce new technologies at customer sites through demos, on site evaluations, and new tool qualifications.
- Works with customer and senior engineers cross functionally to understand roadmaps, process flow, inflection points, requirements and business issues/ challenges.
- Works with suppliers to make sure required parts and supplies are available
- Contributes to product development and release activities.
- May act as CTM-single point of contact accountable for process related requests.
|
Dein Aufgabenbereich
- Abgeschlossene technische Ausbildung (LAP, HTL, Universität, FH)
- Erste einschlägige Berufserfahrung, vorzugsweise im Rohrleitungs- und Anlagenbau
- Technisches Verständnis
- Bereitschaft zur Weiterentwicklung
- Hohe zeitliche Flexibilität und Reisebereitschaft
- Sehr gute Englisch Kenntnisse in Wort und Schrift
|
|
|
Was wir bieten
- Flexible Arbeitszeiten und Homeoffice zur besseren Work‑Life‑Balance
- Vielfältige Lern- und Entwicklungsmöglichkeiten (Workshops, Kurse, Mentoring)
- Betriebskantine mit frischem Essen und Gesundheitsangebote
- Kollegiales Umfeld mit regelmäßigen Team-Events und Sportaktivitäten
- Sprachkurse und internationale Vernetzungsmöglichkeiten
- Unterstützung für ältere Mitarbeitende, z. B. reduzierte Arbeitszeiten ab 60 Jahren
- Ganzheitliche Vorsorge für Gesundheit, Sicherheit und Wohlbefinden
|
Vollzeit
Eberndorf
06.08.2026
Eberndorf
Was wir bieten
- Langfristige Perspektive in einer wachsenden Branche
- Geregelte Arbeitszeiten: Montag bis Donnerstag 08:00–17:00 Uhr, Freitag 08:00–14:00 Uhr
- Gute Erreichbarkeit mit öffentlichen Verkehrsmitteln (Bahnhof fußläufig)
- Parkplatzmöglichkeiten vor Ort
- Flache Hierarchien und kurze Entscheidungswege
|
|
|
R&D Process Engineer - Thin Film Deposition (all genders)
- Develop, monitor, and optimize thin film deposition processes (primarily sputtering) to support R&D and prototype fabrication.
- Maintain tool health and stability through performance tracking, SPC monitoring, and preventive maintenance coordination.
- Support researcher use of deposition tools, ensuring safe operation, consistent process quality, and compliance with FAB standards.
- Lead and assist in tool upgrades, process capability improvements, and new equipment evaluation or acquisition.
- Document process parameters, tool performance, and experiment outcomes to ensure traceability and knowledge sharing.
- Serve as the technical interface between the fabrication team and research groups to enable efficient process development and experimentation.
|
|
|
In your career, let’s prove what’s possible.
- Customer Relationship Management: Develop and maintain strong relationships with key accounts, acting as the primary technical point of contact.
- Priority Alignment: Drive alignment between account teams and clean product line on priorities for market penetrations and defenses.
- Process Optimization: Collaborate with customers to optimize semiconductor manufacturing processes, ensuring the highest levels of efficiency and performance.
- Product Demonstrations: Organize product demonstrations and presentations to showcasethe capabilities and benefits of Lam Research technologies.
- Feedback Loop: Gather and relay customer feedback to internal teams to drive continuousimprovement and innovation in our products and services.
- Training and Education: Provide training and educational resources to customers and account teams to enhance their understanding and utilization of Lam Research technologies.
- Cross-Functional Collaboration: Work closely with sales, engineering, and product development teams to align customer needs with company objectives.
|
Vollzeit
Villach, Pavia
07.08.2026
Villach, Pavia
|
Research Engineer – Solid-state quantum systems on chip (all genders)
- Experimental work in the Applied Quantum Sensing team
- Design, develop, and test optical, electronic, magnetic, and microwave solutions for quantum systems-on-chip.
- Drive the development and exploration of novel quantum control protocols and implement software and hardware solutions.
|
|
|
|
|
Ihr Aufgabengebiet
- Optimierung und Weiterentwicklung von Produktionsprozessen
- Analyse von Prozessabweichungen und Einleitung von Gegenmaßnahmen
- Unterstützung bei kontinuierlichen Prozessverbesserungen, Artikelfreigaben und Änderungsdiensten
- Mitwirkung bei Prozessaudits, Prozessanalysen sowie bei produktionsrelevanten Projekten
- Anwendung von Lean-Methoden zur Effizienzsteigerung
- Koordination von Muster- und Versuchsaufträgen
- Erstellen und koordinieren von Prozess Updates
- Durchführen von Maschinen- und Prozessfähigkeitsuntersuchungen
|
|
|
|
|
Senior Research Engineer – Quantum Photonic Integrated Circuit Design and PDK development (all genders)
- Designing photonic integrated circuits (passive components and modulators) for quantum applications based on AlN.
- Contributing to the development and validation of PDK components, including layout, simulation, and documentation.
- Generating layout from design and performing design rule checks
- Characterizing fabricated devices in the lab (optical/electrical testing) and analyzing measurement data
- Designing improvements based on characterization results to enhance device performance and yield
- Collaborating closely with process and fabrication teams to ensure high design-to-fab fidelity
- Contributing to reporting, documentation, publication, IP generation, and patent application
- Supporting industry and academic collaborations within multidisciplinary projects
|
Senior Research Engineer - Process Development for Integrated Photonics Fabrication (all genders)
- PIC Fabrication & Development:Designing, fabricating, and testing PICs.
- Platform Specialization: Focusing primarily on process development for either Aluminum Nitride (AlN) or Thin-Film Lithium Niobate (TFLN) Platform.
- Technology ownership: Owning a platform flow (AlN or TFLN) and acting as a go-to person for fabrication topics, including coordination with cleanroom/process engineering and alignment with design/test needs. This includes mentoring and knowledge transfer, proactive risk/bottleneck identification and mitigation, and contributing to roadmap/benchmarking and experimental strategy.
- DOE- Driven process development:
- Developing and integrating process modules for stable, repeatable fabrication, increasing
- Technology Readiness Level (TRL) and pilot-line readiness.
- Planning and executing Design of Experiments (DOE) to optimize processes.
- Driving process integration, stability, and performance improvements for scalable fabrication.
- Defining Process windows
- Performing data-driven root-cause analysis
- Fabrication: Hands-on work with key fabrication processes including lithography, deposition (PVD/ALD/PECVD), dry etch (ICP-RIE), metrology/SPC, and documentation/change control.
- Collaboration & Teamwork:
- Working closely with SAL’s process engineering team.
- Collaborating to ensure high fabrication fidelity.
- Supporting industry and academic collaborations within multidisciplinary projects.
- Documentation & IP:
- Reporting and thorough documentation of work.
- Contributing to IP generation and patent applications.
|
|
|
Senior Research Engineer – Technology development and process integration for MEMS-based applications (all genders)
- Technology development for MEMS-based devices in various fields such as optics, acoustic, inertial sensors from concept to prototype.
- Development and implementation of DOE to improve device performance.
- Microfabrication and prototyping in cleanroom facility by using 200 mm wafer level technology.
- Advanced testing of developed MEMS devices (electrical, mechanical, acoustic, …).
- Scientific communication / reporting of research results.
|
Vollzeit
Spittal an der Drau, Österreich
07.08.2026
Spittal an der Drau, Österreich
DEINE AUFGABEN:
- Entwicklung technischer Anlagenkonzepte für internationale Recycling- und Abfallaufbereitungsanlagen
- Erstellung technischer Spezifikationen für Maschinen und Anlagenkomponenten
- Auslegung von Fördertechnik, Aufbereitungs- und Sortieranlagen
- Unterstützung bei Layoutplanung, Materialfluss und Anlagenkonzepten
- Prüfung und Bewertung technischer Lieferantenunterlagen
- Koordination technischer Schnittstellen zwischen internen und externen Projektpartnern
- Überwachung technischer Termine und Meilensteine
- Mitarbeit im Änderungsmanagement sowie bei technischen Projektabnahmen
- Technische Abstimmung mit Lieferanten und Partnerunternehmen
- Teilnahme an technischen Projektbesprechungen und Reviews
- Erstellung und Pflege technischer Dokumentationen
|
In your career, let’s prove what’s possible.
- Design, develop, troubleshoot, and debug software programs for enhancements and new products.
- Implement new customer requirements and features in our existing application.
- Maintain and enhance existing code base by investigating and resolving problem areas.
- Demonstrate solutions through clear documentation, flowcharts, and well-structured code.
- Collaborate with cross functional teams to design and develop software programs.
- May visit customer site to provide support and have ability to travel (total is less than 10%).
|
Vollzeit
Spittal an der Drau, Österreich
07.08.2026
Spittal an der Drau, Österreich
DEINE MISSION:
- Eigenverantwortliche Leitung internationaler Baustellen
- Koordination von Montagepersonal, Subunternehmern und Projektpartnern
- Planung und Überwachung der Montageabläufe sowie des Baufortschritts
- Sicherstellung von Qualitäts-, Sicherheits- und HSE-Standards
- Organisation und Durchführung von Baustellenbesprechungen
- Koordination von Inbetriebnahmen, Abnahmen und Anlagenübergaben
- Ansprechpartner für Kunden, Lieferanten und Partner vor Ort
- Unterstützung des Projektmanagements bei Termin-, Kosten- und Claim-Themen
- Erstellung von Baustellendokumentationen und regelmäßigen Reports
|
