Vollzeit | befristet | Praktikum
|
In your career, let’s prove what’s possible.
- Is the lead engineer of a development program (product), making sure that mechanical and electrical hardware and the tool software work together to meet the system specification
- Owns developing the system specification based on the product specification and configuration options
- Is accountable for resolving design tradeoffs/conflicts to ensure the design is integrated, such that the overall product performs as described in the system specification
- Assures that the system meets engineering- and compliance standards, especially in the concept and detailed design phases
- Owns BOM (bill of material) setup and execution of the documentation release plan
- Prepares all required program/product related Engineering deliverables (e.g. FMEA, technical specifications, risk analyses)
- Technical responsible that all interfaces for the entire product are well defined and working
- Participates in the cost allocation model and assures that designs meet the cost targets
- Owns developing the reliability allocation model, the reliability design approach and test plans
|
Vollzeit
Villach (Austria), Munich (Germany)
10.04.2026
Villach (Austria), Munich (Germany)
|
Vollzeit
München, Linz
10.04.2026
München, Linz
|
|
|
Vollzeit | befristet | Praktikum
In your career, let’s prove what’s possible.
- Support the Process Engineering Team for lab activities, analytical studies and research
- Perform fundamental studies to determine the most suited solution approaches
- Conduct experiments with wet chemicals in beaker and on system level
|
Vollzeit | befristet | Praktikum
In your career, let’s prove what’s possible.
- Training Content (support evaluation of contents)
- Web-Based Training (create and update interactive trainings with Articulate Storyline)
- BKM Video creation
- Learning Management system (support of maintenance in LMS system)
- CIP Project Management Support
|
In your career, let’s prove what’s possible.
- You will be responsible for the design of new products and lifecycle management of existing electronic circuits.
- You will be responsible for component selection, design, development, testing and evaluation of control circuits for our machines.
- You will work with a multidisciplinary engineering design team: electrical, mechanical, software, technical support, productivity engineers, and suppliers, on the design, modification, of custom and OEM components.
- You will need to prepare and analyze test plans and procedures to assure that technical and operational requirements are met and properly demonstrated.
- You will be responsible for the collection and analysis of relevant material and data in preparation of your presentation at design, project, and program reviews.
|
In your career, let’s prove what’s possible.
- Accountable for development, verification and documentation of fluid delivery systems to meet the systems specifications
- Provides concepts and technical designs for chemical fluid systems based on modeling & calculation data
- Accountable that system meets all engineering requirements regarding Compliance and Safety Standards
- Clarification of fluid delivery requirements
- Owns execution of BOM and documentation release plan
- Technical response to meet all interface requirements with other modules and environment
- Prepare all required deliverables based on product development plan (e.g. FMEA, technical specifications, risk analyses)
- Close relationship to our suppliers an internal departments to ensure that we receive high quality-, well tested and cost saving solutions for our technical needs
- Performs engineering data analysis of mechanical and electrical aspects of the system by using of appropriate methods and tools (e.g. MATLAB, LabVIEW …
|
In your career, let’s prove what’s possible.
|
|
|
Vollzeit | befristet | Praktikum
In your career, let’s prove what’s possible.
- Training Content (support evaluation of contents)
- Web-Based Training (create and update interactive trainings with Articulate Storyline)
- BKM Video creation
- Learning Management system (support of maintenance in LMS system)
- CIP Project Management Support
|
|
|
|
|
Vollzeit | Teilzeit | Praktikum
|
Vollzeit | Teilzeit | befristet | Praktikum
|
In your career, let’s prove what’s possible.
- Develop, improve, and standardize test methods and test fixtures for Lam products.
- Lead test fixture transitions to suppliers, including training, documentation, and on-site support when required.
- Own supplier test and facility readiness, including test reviews, sign-off activities, and risk assessment prior to Test fixture building and transitions.
- Coordinate test fixture duplication and rebuild efforts in close collaboration with Manufacturing Engineering and Supplier Test Technician teams.
- Provide remote and on-site support to suppliers during test-related line-down situations to ensure rapid issue resolution.
- Verify and set up duplicated test fixtures to ensure proper functionality and compliance with requirements.
- Maintain and update test documentation and test fixture Bills of Materials (BOMs) as required.
- Drive continuous yield, quality, and process improvements through test data analysis, root cause investigations, and corrective action implementation.
- Support the introduction of new products/components, design changes, or process updates by assessing test impact and readiness at supplier sites.
- Define and maintain supplier test best practices to ensure consistency across remote factories.
- Escalate unresolved or systemic issues to Leads, or Supervisors in a timely and structured manner.
- Perform system-level and component-level electrical and mechanical testing and troubleshooting.
- Utilize test and diagnostic equipment, including test programs, oscilloscopes, signal generators, and specialized test apparatus.
- Define and document test and diagnostic programs, including procedures to support testing of new components based on Non Standard Request or Change Orders.
- Design and develop cost-effective testing methods for systems and equipment throughout product development and manufacturing phases.
- Collaborate with the Manufacturing Engineering team, suppliers, account teams, and Supplier Engineering Technology (SET) members to ensure seamless integration and smooth transitions.
- Work with internal and external stakeholders to influence decisions and drive company objectives
|
|
|
|
|
|
|
In your career, let’s prove what’s possible.
- be involved in all phases of the software development (SW) lifecycle, including the testing, analysis and maintenance of the software system
- participate in the SW deployment process ensuring qualified Software Products are successfully installed at our customer's facilities
- perform troubleshooting of system software related issues
- perform in-house & onsite support of customer install base and resolution of customer issues
- test, troubleshoot and propagate errors clearly to SW and HW Development Engineers
- setup and maintain tool simulators, testing environments, lab support to reproduce issues found in field and verify SW solutions
- understand customer technology & productivity needs and feedback those requirements into software development
- prepare presentations to Lam internal stakeholders and customers
- travel worldwide wherever semiconductor customers are located (up to 25%)
|
Vollzeit | Teilzeit | Praktikum
|
Vollzeit | Teilzeit | Praktikum
|
|
|
Vollzeit
Villach, Shenzhen, 深圳
07.04.2026
Villach, Shenzhen, 深圳
|
DEINE MISSION:
- Projekte steuern: Du betreust eigenverantwortlich Projekte im Maschinen- und Anlagenbau – von der Planung bis zur Umsetzung.
- Schnittstellen managen: Die enge Abstimmung mit Kunden, Vertrieb und internen Fachabteilungen gehört zu Deinem Alltag.
- Umsetzung koordinieren: Du koordinierst den Schaltschrankbau sowie die Installation von Maschinen und Anlagen.
- Engineering umsetzen: Mit EPLAN P8 erstellst Du Stromlaufpläne für Prototypen und Serienanlagen.
- Strukturen schaffen: Du entwickelst und pflegst Vorlagen, Makros, Stücklisten und alle fertigungsrelevanten Unterlagen.
- Prozesse verbessern: Im Änderungsmanagement bringst Du Dich aktiv ein und pflegst Artikel sowie Baugruppen im ERP-System.
- Weiterentwicklung vorantreiben: Du unterstützt die kontinuierliche Verbesserung von Produkten, Prozessen und Arbeitsplätzen.
|
|
|
In your career, let’s prove what’s possible.
- Responsible for providing quality on-site repair and maintenance service of complex electro-mechanicalsystems. Analytical troubleshooting of technical problems to component level
- Performs complete installation/relocation start-up services
- Troubleshoots equipment problems and conduct diagnostic procedures to isolate problems and take stepsto minimize downtime or system interruptions and eliminate equipment malfunctions. Determine correctiveactions as required
- Performs installations and/or relocations of equipment at customers’ sites
- Remains up to date on equipment/tools through appropriate training, manuals, factory periodicals and otherrelevant materials
- Assists in complex field modifications and updates as released in Engineering Change Notifications
- Maintains records and reports as required to properly coordinate activities with supervisors and customers
- Responsible for Planning, management, and execution of projects of a limited scope and duration
- Coaches less experienced collegues within job scope
|
Vollzeit | befristet | Praktikum
|
|
|
