Ihre Aufgaben:
- Instandhaltung, Wartung und Reparatur technischer und mechanischer Anlagen
- Störungssuche, Diagnose und Fehlerbehebung an Produktionsanlagen
- Unterstützung bei der Weiterentwicklung und Umsetzung von Prozessoptimierungen
|
Vollzeit | Teilzeit | Praktikum
Auf einen Blick
- Unterstützung der elektrotechnischen Betriebsführung vom 110kV Trafo bis zur Steckdose
- Durchführung von Bestandsaufnahmen, Analysen und Auswertungen
- Erarbeitung von Konzepten und Präsentationen
- Berechnung von Leistungsreserven an Verteilungen
- Abwicklung von Kleinprojekten
|
In your career, let’s prove what’s possible.
- Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam’s complex electro-mechanical and electronic systems at customer sites.
- Perform analytical problem-solving, troubleshooting, conduct diagnostics, and isolate issues to the component level, and take corrective actions to minimize downtime, system interruptions, and equipment malfunctions.
- Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification.
- Assist in complex field modifications and updates, maintaining records and reports to coordinate activities between Lam and the customer.
- Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction.
- Troubleshoot and create customer response action plans to support customer needs.
- Transparently discuss opportunities and challenges with customer to increase trust.
- Provide technical instruction and mentoring for more junior engineers.
|
Vollzeit | Teilzeit | Praktikum
Auf einen Blick
- Qualitativer Stammdatenaufbau und Datenoptimierung für den Fertigungsbereich
- Ansprechpartner für Themen betreffend der Datenqualität und –stabilität
- Mitarbeit bei Automatisierungs- und Digitalisierungsprojekten
- Statistische Prozesskontrolle, Datenauswertungen und Reporting
- Begleiten und Koordinieren von Fehleranalysen und Fehlerbehebungsprozessen
|
At a glance
- Develop scripts to support automation in AMS Verification (Analog Mixed Signal Verification)
- Convert golden source (Excel) to different other views (csv-based)
- Create scripts to automate frequently performed tasks
- Participate in the development of new verification solutions
|
At a glance
- EDA & Simulation Leadership: Own and advance our EDA toolchain (Ansys, Comsol, Cadence, etc.) and develop/refine innovative simulation methodologies.
- Methodology Guidance: Act as the primary technical expert for simulation methodologies, driving best practices and mentoring engineers in their application.
- Automation & AI Integration: Lead the charge in identifying and implementing automation and AI/ML opportunities within our EDA tools and design workflows.
- Cross-Team Collaboration: Partner with design, layout, and technology teams to ensure optimized and effective simulation solutions.
- Continuous Improvement: Stay ahead of industry trends in EDA, simulation, AI, and automation, bringing new capabilities into our design flow.
|
At a glance
- Do analog focused Mixed-Signal Verification
- Create and maintain verification plans
- Define verification metrics and set-up verification environments, including analog testbenches
- Elaborate and execute tests on analog transistor level (schematic + layout) with digital RTL and gatelevel
- Team up and collaborate with colleagues from analog and digital design and verification, as well as concept engineering
|
At a glance
- Discuss and evaluate upstream platform architecture
- Implement data processing pipelines
- Integrate software tools with workflows of Component Verification engineers
- Support in the development of scripts for loading/transforming data
- Investigate of possible frameworks
- Have direct interactions with our in-house customers
- Document source codes and processes
|
In your career, let’s prove what’s possible.
- Troubleshooting and regular maintenance of the lab equipment
- Mechanical and electrical start-up of new lab tools
- Support the process engineers in executing the customer demonstrations
- Support the product development by conducting design validation tests and delivering improvement proposals
- Documents the tools configuration and reports the tests results
- Support LAB facilities and willingness to support LAB On-Call team
|
At a glance
- Engage in the digital design front-end flow
- Write RTL, perform simulations, linting, synthesis, logic equivalence checks, and automated test pattern generation
- Collaborate with AMS IP project teams for IP designs and internal customers
- Coordinate team-related topics to support the development and growth of the team
|
At a glance
- Define test concepts and manage test specification discussion for Power semiconductor device
- Be responsible for test package development (test hardware and software)
- Closely cooperate with different development teams and production locations
- Optimize test methods to improve quality and reduce test costs
- Implement test solutions in our production locations spanning all around the world
|
In your career, let’s prove what’s possible.
- Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam’s complex electro-mechanical and electronic systems at customer sites.
- Perform analytical problem-solving, troubleshooting, conduct diagnostics, and isolate issues to the component level, and take corrective actions to minimize downtime, system interruptions, and equipment malfunctions.
- Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification.
- Assist in complex field modifications and updates, maintaining records and reports to coordinate activities between Lam and the customer.
- Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction.
- Troubleshoot and create customer response action plans to support customer needs.
- Transparently discuss opportunities and challenges with customer to increase trust.
- Provide technical instruction and mentoring for more junior engineers.
|
In your career, let’s prove what’s possible.
- Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services for Lam’s complex electro-mechanical and electronic systems at customer sites.
- Perform analytical problem-solving, troubleshooting, conduct diagnostics, isolate issues to the component level, and take corrective actions to minimize downtime, system interruptions, and equipment malfunctions.
- Stay up to date on semiconductor capital equipment and Lam products through learning, training, and certification.
- Assist in complex field modifications and updates, maintaining records and reports to coordinate activities between Lam and the customer.
- Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction.
- Troubleshoot and create customer response action plans to support customer needs.
- Transparently discuss opportunities and challenges with customers to increase trust.
- Provide technical instruction and mentoring for more junior engineers.
|
Vollzeit | befristet | Praktikum
Auf einen Blick
- Durchführung von Zuverlässigkeitsuntersuchungen von SMART Power Bauteilen für die Automobilindustrie
- Erfassung von unterschiedlichen Messdaten an elektronischen Schaltkreisen
- Organisation der Bereitstellung von Bauteilen für die Zuverlässigkeitstests
- Verifizierung von gestressten Bauteilen und deren Archivierung
|
At a glance
- Work closely with the Chip-Package-Board CoDesign team to design, implement, test, and maintain innovative software solutions that support semiconductor design processes
- Explore and apply AI/ML algorithms to enhance automation and efficiency in Electronic Design Automation (EDA) workflows and improve Chip-Package-Board CoDesign methodologies
- Develop software solutions using Python, Java, and Cadence SKILL within the EDA framework to support advanced semiconductor design challenges
- Analyze data from design workflows to identify optimization opportunities and implement data-driven solutions using AI/ML approaches
- Create tools that integrate AI/ML-based optimizations for resource-intensive processes such as simulation, design validation, and testing
- Participate in code reviews, maintain high-quality documentation, and develop test plans to ensure robust software solutions
- Acquire skills in "Cadence SKILL" programming and apply it towards developing efficient solutions for CoDesign challenges
- Stay updated with the latest trends in software development, AI/ML, and EDA technologies, actively contributing with new ideas to improve processes
|
At a glance
- Capture and analyze customer inputs on application and product level for the next generation Magnetic Current Sensors
- Analyze and understand relevant applications (like OBC, DCDC converters) in detail by modelling, simulation and measurements on application level to derive valuable features for best fit Magnetic Current Sensors
- Promote, explain and defend our Magnetic Sensor products to the most important Tier 1s and OEMs in Automotive Industry during Design-In activities
- Write technical documents like Data Sheets, Requirements, Manuals, Application Notes and Publications
- Perform analysis and benchmarking of competitors´ Magnetic Current Sensors as well as their support material
- Extend and develop technical training material and perform trainings for worldwide FAE colleagues and key customers to support new product launches and go to market activities
- Be the go-to person for Field Application Engineers during the world-wide Design-In of our Sensor
- Responsible for selected Application Roadmaps and Product Roadmaps
|
In your career, let’s prove what’s possible.
- Endmontage & Test (Teile/Module/Komponenten/Plattformen)
- Elektrische Montage und Tests von LAM-Spin-Clean-Plattformen – Grundlage ist die Konfiguration und die Dokumentation (z.B. Produktionsplan, mechanische Zeichnungen, Schaltpläne, internes Prüfprotokoll etc.)
- Elektrische Montage und Prüfung von Neukundenwünschen (NSR's)
- Strukturierte Diagnostik und Problemlösung
- Durchführung der definierten Prüfschritte (Zwischenprüfungen) gemäß internem Prüfprotokoll
- Aktive Mitarbeit bei der Übergabe von Entwicklungsprojekten an die Produktion
- Kontinuierliche Verbesserung unserer Arbeitsabläufe und Dokumentationen
- Aktiver Wissensaustausch (z.B. interne Schulungen, Lieferantenschulungen)
- Prüfung der Dokumentation, des Materials und Berichterstattung von Abweichungen (z.B. Problembericht)
- Kontinuierliche Qualitätsverbesserung durch aktive Zusammenarbeit und Kommunikation mit den internen Kunden und Lieferanten
- Aktive Mitarbeit an der kontinuierlichen Verbesserung des Produkts, des Geschäftsprozesses und der Systeme (z.B. Dokumentation, internes Prüfprotokoll etc.)
|
Das zeichnet dich aus:
- Elektrotechnische Ausbildung (z.B. LAP Betriebselektriker - idealerweise mit Meisterprüfung)
- Grundkenntnisse in SPS (Siemens S7), ABB Frequenzumrichter, Lenze Servoregler
- Mehrjährige Berufserfahrung vorausgesetzt
- Selbstständigkeit und Eigenverantwortung
- Hohe Kommunikation- und Organisationsfähigkeit erwünscht
- Teamorientiertes Arbeiten
- Führerschein B erforderlich
|
In your career, let’s prove what’s possible.
- Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam’s complex electro-mechanical and electronic systems at customer sites.
- Perform analytical problem-solving, troubleshooting, conduct diagnostics, and isolate issues to the component level, and take corrective actions to minimize downtime, system interruptions, and equipment malfunctions.
- Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification.
- Assist in complex field modifications and updates, maintaining records and reports to coordinate activities between Lam and the customer.
- Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction.
- Troubleshoot and create customer response action plans to support customer needs.
- Transparently discuss opportunities and challenges with customer to increase trust.
- Provide technical instruction and mentoring for more junior engineers.
|
Your Tasks
- Teaching in the field of power electronic components, systems and circuits, as well as associated advising and mentoring of students with an interest in incorporating sustainable and green technologies in power electronics
- Supervision of students at Bachelor and Master levels
- Independent research in industrial power electronics with the aim of leading a research group
- Acquisition and management of national and international funded projects
- Taking on organizational and administrative activities (part of academic self-administration)
- Contribution to the professional profiling and further development of the study programs
- Representing the university in regional and international partnerships and in cooperation with public administra- tion, business, and the scientific community
|
At a glance
- Tackle the field of Acoustic/Ultrasound/Photoacoustic MEMS Systems (micro-electromechanical systems) for imaging applications, with the goal of exploring modern tools in fields like the MathWorks Medical Imaging Toolbox
- Target system demonstrators based on MEMS products and multichannel signal processing platforms, which will allow you to gain experience in hardware design
- Participate and contribute to integrated circuit design and simulation as well as MEMS development activities at the edge of current technology in a global semiconductor leader like ours
|
At a glance
- Lab Coordination:
- Oversee 50+ workbenches and 80 setups, including maintenance, repairs, and reconstruction
- Manage bench assignments for internal projects and coordinate with10+ stakeholder teams
- Operations:
- Handle supplier communication, material purchasing and inventory stocking
- Plan and execute investments for cost-effective, high-quality lab infrastructure
- Supervise and train students, ensure lab access authorization and maintain tools and equipment
- Safety:
- Act as the primary contact for safety audits (1-2 annually) and ensure full compliance
- Coordinate audit preparations (e.g. cleaning, safety documents, fire safety)
- Maintain up-to-date safety regulations and documentation as the legal safety owner
- Customer and Facility Support:
- Prepare setups for customer visits and demonstrations
- Organize storage areas and mechanical rooms for efficient use
- Manage lab entry approvals, training and user lists
|
At a glance
- Get experience with Digital and Mixed-Signal integrated circuits
- Get experience with state of the art design preparation and provisioning techniques
- Get hands-on experience with verifying design data quality
- Get familiar with the Infineon chip development flow and the 3rd Party IP Lifecycle
- Contribute to the automation enhancements of the 3rd Party IP provision flow
|
At a glance
- Define target product specifications of SiC JFET variants for hotswap, Oring, protection switch and circuit breaker applications
- Be the main technical interface to the development and go-to-market teams during the product development and post product launch stages respectively
- Develop application evaluation platforms for product validation and customer promotion
- Perform measurements based on fit for use plan to validate the suitability of SiC JFET based solutions in applications environment and document the relevant results
- Run performance benchmarking tests of internal and external products
- Prepare the product datasheets; develop product and application literature such as application notes, technical articles, promotion material, webinars etc.
- Provide global product support for the customer design-in projects
- Run simulations to replicate real application use scenarios and derive analyses
- Cascade customer feedback to internal development teams
|
At a glance
- Lead the design of cutting-edge RF systems
- Acquire deep understanding of customer needs and lead the technical design accordingly
- Work close with concept, digital, verification engineers in order to achieve highest synergies in targets and quality
- Lead innovation projects to push the performance RF systems through novel solutions
|
Auf einen Blick
- Verantwortung für die Entwicklung und Implementierung von Design-Systemen in der Technologieentwicklung
- Anwendung und Weiterentwicklung von Methoden zur Optimierung von Designprozessen
- Verarbeitung und von Daten aus der Simulation, der Verifikation, der Produktion, dem Testen und den Labormessungen
- Enge Zusammenarbeit mit interdisziplinären Teams zur Sicherstellung der technischen Machbarkeit und Effizienz
- Programmierung und Implementierung von Softwarelösungen in SKILL, Python oder ähnlichen Programmiersprachen
- Mentoring und Unterstützung von Junior Engineers im Team
|
At a glance
- Coordinating the customer success stories process & communicating towards key stake holders within the organization
- Driving regular business performance analyses & reportings towards PMG team and higher management (e.g. orders, cancellations, market development), incl. development of automated dashboards
- Driving analyses required for smooth ramp up of newly launched products (e.g. sample tracking, opportunity funnel development)
- Supporting the creation and revision of general promotion materials (e.g. customer presentations, websites, training videos) & dedicated presentations required for customer visits
- Coordinating regular team meetings within PMG team & relevant keystake holders within the organization
|
At a glance
- Develop new voltages classes and broadening the functionality of the existing products
- Support the ramp up and yield learning phase of new technology platforms like CoolMOS or CoolSiC together with the process integration group
- Closely collaborate with PSS production management, unit process and process integration engineers of FAB Villach
- Develop new MOSFET generations, define together with TCAD and application experts the features of the upcoming generations
- Define unit process requirements along the technology roadmap together with unit process development engineers
- Plan, coordinate and evaluate process experiments including statistical DoEs and ensure process window
- Implement improvement regarding cost, yield and stability with change management processes and/or technology projects
|
At a glance
- Be part of product development projects for our high-voltage discrete products: drive the final data sheet and other go-to-market collaterals such as application notes and evaluation boards
- Drive and support design-ins as a technical customer interface to generate business for our direct customers in close collaboration with product marketing
- Understand the challenges of our customers and how the specific value proposition of our products makes them successful
- Prepare and provide technical documentation and training on the production application level
- Be the technical person for Discrete Automotive Products for inverter applications
|
At a glance
- Solid C-programming skills
- Familiarity with 32-bit microcontrollers: architecture, memory, peripherals
- RTOS basic knowledge (required)
- Good English skills
|
