At a glance
- Get experience with Mixed-Signal High Speed, RF and mmWave and Integrated Circuits.
- Get experience with measurements related to High-Speed PLLs and Data Communication: Jitter, Eye Diagram, BERT.
- Get experience with high-end RF/mmWave measurement equipment.
- Get hand-on experience in Validation and Debugging.
- Design of PCBs for the measurement of products
- Prototype and evaluate new tools and methodologies.
- Familiarize yourself with Validation flow: definition of appropriate measurement setup, automation, data post-processing and analysis.
|
At a glance
- Engage in the digital design front-end flow
- Write RTL, perform simulations, linting, synthesis, logic equivalence checks, and automated test pattern generation
- Collaborate with AMS IP project teams for IP designs and internal customers
- Coordinate team-related topics to support the development and growth of the team
|
At a glance
- Work in the R&D mixed-signal IC design organization
- Support R&D chip designers for daily issues related to mixed-signal IC development flow and related EDA software tools and methodology (1stlevel support)
- Proactively consult chip design projects to ensure proper and efficient usage of working environment, software tools and related methodology
- Collect application specific requirements to the design environment and provide fast solutions (e.g. hot fixes) where needed
- Trigger and track implementation of enhancements of the design environment to ensure on-time availability for productive usage
- Work closely with internal software tool and methodology providers on improving and developing new solutions
- Promote new methodology solutions and support the roll-out of these in design projects
- Share knowledge within the (IFX world-wide) “Design Application Engineering Community
|
At a glance
- Lead the design of cutting-edge RF systems
- Acquire deep understanding of customer needs and lead the technical design accordingly
- Work close with concept, digital, verification engineers in order to achieve highest synergies in targets and quality
- Lead innovation projects to push the performance RF systems through novel solutions
|
At a glance
- Work in the R&D mixed-signal IP design organization
- Support R&D chip designers for daily issues related to mixed-signal IP development flow and related EDA software tools and methodology (1st level support)
- Proactively consult chip design projects to ensure proper and efficient usage of working environment, software tools and related methodology
- Collect application specific requirements to the design environment and provide fast solutions (e.g. hot fixes) where needed
- Trigger and track implementation of enhancements of the design environment to ensure on-time availability for productive
- usage
- Work closely with internal software tool and methodology providers on improving and developing new solutions
- Promote new methodology solutions and support the roll-out of these indesign projects
- Share knowledge within the (IFX world-wide) "Design Application Engineering Community"
|
At a glance
- Drive FPGA design and implementation from SoC-level IFX product perspective
- Develop FPGA, embedded system, application-based platforms (hardware, emulation, mixed-signal)
- Drive result-oriented analysis and debug
- Organize and support system verification and prototyping projects
- Have the potential to develop from technician to team leader and organize the team for multi-dimensional projects with multiple time zones
|
At a glance
- Be the go-to person of the digital verification for complex digital and mixed signal designs, providing hands-on expertise in digital verification, from building environments from scratch to leveraging existing flows
- Oversee and coordinate all aspects of digital verification, including planning, tracking, and reporting, and ensure clear understanding of verification requirements through effective communication with multiple stakeholders
- Collaborate with and contribute to coordination of cross-functional teams, including concept, design, AMS verification, and post-silicon validation teams, to ensure high quality designs
- Focus on all-directions-reuse of the Verification Components to be implemented
- Identify and mitigate risks in dynamic projects, with proactive communication to the project team
- Drive the enhancement of existing verification methodologies and flows, drive required innovation projects and get buy-in from management
- Drive process and efficiency improvements, share your expertise to enable team growth, and inspire and mentor new lead verification engineers to help them succeed in their roles
- Identify and address synergies between digital and analog centric Pre-Silicon verification, and Post-Silicon validation
|
At a glance
- Lead the digital verification of complex digital and mixed signal designs, including IPs, Subsystems, ASIC and SoCs.
- Coordinate the overall digital verification activities such as verification planning, verification tracking and reporting, as well as requirement-based verification
- Conduct the clarification of verification requirements with multiple communication interfaces
- Collaborate with cross-functional teams, including concept, design, AMS verification, and post-silicon validation teams, to ensure high quality designs
- Hands-on contributor to digital verification either from scratch, or using legacy verification environments and flows
- Focus on all-directions-reuse of the Verification Components to be implemented
- Identify and mitigate risks in dynamic projects, with proactive communication to the project team
- Drive the enhancement of existing verification methodologies and flows, drive required innovation projects and get buy-in from management
- Foster process and efficiency improvements where applicable, as well as share your expertise to the other team members so that they are able to grow
- As a technical lead inspire and mentor junior verification engineers while providing invaluable technical support and guidance to development teams and business partners
- Identify and address synergies between digital and analog centric Pre-Silicon verification, and Post-Silicon validation
|
Vollzeit | befristet | Praktikum
At a glance
- Analog blocks in Infineon microcontrollers
- Analog to Digital (ADC) and Digital to Analog (DAC) converters
- High speed interfaces
- High Precision Oscillators and PLLs
- Power Management Systems (PMS)
- Battery Management Systems (BMS)
- DCDC Converter for low voltage applications and Linear Voltage Regulators (LDOs)
- RF blocks for radar systems
- Bias & Control circuits for 5G antennas
|
At a glance
- Be responsible for planning, execution and coordination of pre-silicon verification according to ISO26262
- Coordinate and give technical guidance to team members and consultants
- Work together with concept-, design- and verification teams to ensurethat AURIX™ will continue its success story
- Identify, analyze and eliminate design bugs
- Contribute to the development of cutting-edge verification methodology
- Ramp up fellow engineers with your technical expertise
|
At a glance
- Do analog focused Mixed-Signal Verification
- Create and maintain verification plans
- Define verification metrics and set-up verification environments, including analog testbenches
- Elaborate and execute tests on analog transistor level (schematic + layout) with digital RTL and gatelevel
- Team up and collaborate with colleagues from analog and digital design and verification, as well as concept engineering
|
At a glance
- Be responsible for the Power Supply Concept and Sensing Architecture for Automotive Battery Management Systems
- Breakdown stakeholder requirements and application assumptions into block-based requirements for architectural High Voltage and Sensing components
- Be responsible for High Voltage and Sensing IP handling of all platforms within Automotive Microcontroller
- Drive together with the platform lead architects a strategy which enables a family concept by modular & scalable approach
- Proactively be driving innovation (according to strategy) anticipating industry and market trends
- Modeling capability allows to transfer theoretical concept in a reference for further development
- Cooperate with technical marketing team, platform lead architects, system architects, SW development, design teams and other business lines within Infineon
- Be the interface between our application engineering as well as development teams and drive active knowledge transfer
- Own and create technical documentation in order to provide the requested functional descriptions and documents to guarantee the ISO26262 compliance – Impart implementation knowhow to others
|
At a glance
- Create and maintain verification plans
- Choose the right verification methodology
- Setup verification environments and implementation of functional coverage model
- Elaborate, execute and debug tests on RTL level
- Proactively help increase efficiency of verification activities and mitigate risks early
- Contribute to enhancing verification strategy and architecture of IP test benches
- Team up and collaborate with colleagues from analog and digital design as well as concept engineering
|
At a glance
- Create and maintain verification plans
- Choose the right verification methodology
- Define verification metrics and set-up verification environments
- Elaborate and execute tests on RTL and gate-level
- Team up and collaborate with colleagues from analog and digital design as well as concept engineering
|
At a glance
- Challenging product requirements and transferring them into a cost-competitive System-on-Chip architecture
- Contributing to the definition of a common microcontroller architecture for our Power IC Products
- Collaborating with cross-functional teams in Analog/Digital Design, Verification, Firmware Development, Validation, Test, and Project Management to deliver first-pass functional silicon
- Influencing roadmaps and helping to set technology targets for future SOCs
- Being the technical interface to Product Marketing, Technical Marketing and Customers
|
At a glance
- Identify application trends and future requirements through customer discussions and internal experts
- Assess innovative product ideas and directly influence product roadmaps for low voltage Power MOSFETs (OptiMOS)
- Define product requirements, create target datasheets, and develop go-to-market materials like application notes and evaluation boards
- Serve as the technical interface between R&D teams and customers
- Analyze and assess topologies and application conditions through simulations, prototype measurements and benchmarking for target applications example solar power conversions
- Contribute design-in to design-win activities with leading customers
- Conduct technical discussions, coordinate requirements, and support product validation in system design
- Collaborate closely with regional field application engineering (FAE)teams
- Prepare and provide technical documentation and training on product and application levels
|
Your future responsibilities
- Coordinate ITC development and fabrication across different research units and cleanroom facilities.
- Execute small-scale fabrication and prototype for ITC devices in cleanroom facilities utilizing 200 mm wafer-level technology.
- Coordinate testing of developed ITC devices.
- Co-develop the design, fabrication and technological advancement of ion trap chips.
- Perform quality control and documentation for the statical process control.
- Communicate and report research findings to both scientific and non-scientific audiences.
- Communicate and align with industry and academic partners
- Project management
- R&D project acquisition
|
At a glance
- Capture and analyze customer inputs on application and product level for the next generation Magnetic Current Sensors
- Analyze and understand relevant applications (like OBC, DCDC converters) in detail by modelling, simulation and measurements on application level to derive valuable features for best fit Magnetic Current Sensors
- Promote, explain and defend our Magnetic Sensor products to the most important Tier 1s and OEMs in Automotive Industry during Design-In activities
- Write technical documents like Data Sheets, Requirements, Manuals, Application Notes and Publications
- Perform analysis and benchmarking of competitors´ Magnetic Current Sensors as well as their support material
- Extend and develop technical training material and perform trainings for worldwide FAE colleagues and key customers to support new product launches and go to market activities
- Be the go-to person for Field Application Engineers during the world-wide Design-In of our Sensor
- Responsible for selected Application Roadmaps and Product Roadmaps
|
At a glance
- Provide 3rd Level Support and Application/Platform Lifecycle Management in the area of Production Datawarehouse & Reporting Solutions
- Continuously enhance our Production Reporting Platforms using various technologies (Oracle, Hadoop, Denodo, ...)
- Define, design, build and enhance business intelligence solutions
- Partner up with management, application owner, key business customer and team members for the delivery of regional / global services
- Ensure that systems, processes and methodologies as specified are followed to ensure effective monitoring, control and support of service delivery
- Do Incident and Problem Management to support our internal Infineon customers
|
At a glance
- Be part of product development projects for our high-voltage discrete products: drive the final data sheet and other go-to-market collaterals such as application notes and evaluation boards
- Drive and support design-ins as a technical customer interface to generate business for our direct customers in close collaboration with product marketing
- Understand the challenges of our customers and how the specific value proposition of our products makes them successful
- Prepare and provide technical documentation and training on the production application level
- Be the technical person for Discrete Automotive Products for inverter applications
|
At a glance
- Define target product specifications of SiC JFET variants for hotswap, Oring, protection switch and circuit breaker applications
- Be the main technical interface to the development and go-to-market teams during the product development and post product launch stages respectively
- Develop application evaluation platforms for product validation and customer promotion
- Perform measurements based on fit for use plan to validate the suitability of SiC JFET based solutions in applications environment and document the relevant results
- Run performance benchmarking tests of internal and external products
- Prepare the product datasheets; develop product and application literature such as application notes, technical articles, promotion material, webinars etc.
- Provide global product support for the customer design-in projects
- Run simulations to replicate real application use scenarios and derive analyses
- Cascade customer feedback to internal development teams
|
Your future responsibilities
- Lead and develop the MMT Research Unit: Manage and grow the MMT unit (10-15 researchers) within the Microsystem division.
- Personnel leadership: Oversee personnel management, provide supervision and mentorship fostering a collaborative, productive, and inspiring environment.
- Strategic representation and networking: Represent the unit internally and build external partnerships with academia and industry to enhance visibility and impact.
- Project acquisition and corporate responsibility: Drive project acquisition with international partners, ensuring alignment with corporate goals and financial sustainability.
- Research program and portfolio development: Shape the unit’s research strategy and create a balanced project portfolio in coordination with the Head of Research Division Microsytem Technologies.
|
At a glance
- Develop new voltages classes and broadening the functionality of the existing products
- Support the ramp up and yield learning phase of new technology platforms like CoolMOS or CoolSiC together with the process integration group
- Closely collaborate with PSS production management, unit process and process integration engineers of FAB Villach
- Develop new MOSFET generations, define together with TCAD and application experts the features of the upcoming generations
- Define unit process requirements along the technology roadmap together with unit process development engineers
- Plan, coordinate and evaluate process experiments including statistical DoEs and ensure process window
- Implement improvement regarding cost, yield and stability with change management processes and/or technology projects
|
In your career, let’s prove what’s possible.
- Provide quality on-site repair, maintenance service, and complete installation/relocation start-up services of Lam’s complex electro-mechanical and electronic systems at customer sites.
- Perform analytical problem-solving, troubleshooting, conduct diagnostics, and isolate issues to the component level, and take corrective actions to minimize downtime, system interruptions, and equipment malfunctions.
- Keep up to date on semiconductor capital equipment and Lam products through learning, training, and certification.
- Assist in complex field modifications and updates, maintaining records and reports to coordinate activities between Lam and the customer.
- Serve as a subject matter expert, representing Lam to our valued customers, delivering exceptional customer satisfaction.
- Troubleshoot and create customer response action plans to support customer needs.
- Transparently discuss opportunities and challenges with customer to increase trust.
- Provide technical instruction and mentoring for more junior engineers.
|
