In your career, let’s prove what’s possible.
- Design, develop, troubleshoot, and debug software programs for enhancements and new products.
- Implement new customer requirements and features in our existing application.
- Maintain and enhance existing code base by investigating and resolving problem areas.
- Demonstrate solutions through clear documentation, flowcharts, and well-structured code.
- Collaborate with cross functional teams to design and develop software programs.
- Provide technical guidance and mentoring for more junior engineers.
- May visit customer site to provide support and have ability to travel (total is less than 10%).
|
Deine Aufgaben
- Mitgestaltung von Architektur und Design unserer Softwarelösungen
- Konzeption und Weiterentwicklung skalierbarer, robuster Systemarchitekturen
- Entwicklung von Best Practices und Patterns
- Weiterentwicklung von Standards, Libraries und Framework Komponenten
- Unterstützung von Teams bei komplexen Architektur- und Design-Fragen
- Durchführung von Architektur- und Code-Reviews
- Technische Begleitung von Projekten
|
In your career, let’s prove what’s possible.
- be involved in all phases of the software development (SW) lifecycle, including the testing, analysis and maintenance of the software system
- participate in the SW deployment process ensuring qualified Software Products are successfully installed at our customer's facilities
- perform troubleshooting of system software related issues
- perform in-house & onsite support of customer install base and resolution of customer issues
- test, troubleshoot and propagate errors clearly to SW and HW Development Engineers
- setup and maintain tool simulators, testing environments, lab support to reproduce issues found in field and verify SW solutions
- understand customer technology & productivity needs and feedback those requirements into software development
- prepare presentations to Lam internal stakeholders and customers travel worldwide wherever semiconductor customers are located (up to 25%
|
Vollzeit | Teilzeit | Praktikum
|
Vollzeit
Obdach
03.08.2026
Obdach
Ihre Aufgaben
- Entwicklung elektronischer Neuprodukte inklusive Embedded Software (C/C++) für Robotik, Smart Home und Akku-Plattform
- Konzeption, Aufbau und Test elektronischer Baugruppen vom Prototyp bis zur Serienreife
- Entwicklung von Test- und Serviceprogrammen sowie technische Unterstützung bei Neuentwicklungen
- Mitarbeit in Projekten und Sicherstellung von Qualitäts- und Normanforderungen inklusive Auditunterstützung
|
Vollzeit
Villach, Pavia
06.08.2026
Villach, Pavia
|
Vollzeit | Teilzeit | befristet | Praktikum
|
Vollzeit | Leasing, Zeitarbeit
|
Vollzeit | Teilzeit | befristet | Praktikum
|
|
|
|
|
Senior Research Engineer - Process Development for Integrated Photonics Fabrication (all genders)
- PIC Fabrication & Development:Designing, fabricating, and testing PICs.
- Platform Specialization: Focusing primarily on process development for either Aluminum Nitride (AlN) or Thin-Film Lithium Niobate (TFLN) Platform.
- Technology ownership: Owning a platform flow (AlN or TFLN) and acting as a go-to person for fabrication topics, including coordination with cleanroom/process engineering and alignment with design/test needs. This includes mentoring and knowledge transfer, proactive risk/bottleneck identification and mitigation, and contributing to roadmap/benchmarking and experimental strategy.
- DOE- Driven process development:
- Developing and integrating process modules for stable, repeatable fabrication, increasing
- Technology Readiness Level (TRL) and pilot-line readiness.
- Planning and executing Design of Experiments (DOE) to optimize processes.
- Driving process integration, stability, and performance improvements for scalable fabrication.
- Defining Process windows
- Performing data-driven root-cause analysis
- Fabrication: Hands-on work with key fabrication processes including lithography, deposition (PVD/ALD/PECVD), dry etch (ICP-RIE), metrology/SPC, and documentation/change control.
- Collaboration & Teamwork:
- Working closely with SAL’s process engineering team.
- Collaborating to ensure high fabrication fidelity.
- Supporting industry and academic collaborations within multidisciplinary projects.
- Documentation & IP:
- Reporting and thorough documentation of work.
- Contributing to IP generation and patent applications.
|
Senior Research Engineer – Quantum Photonic Integrated Circuit Design and PDK development (all genders)
- Designing photonic integrated circuits (passive components and modulators) for quantum applications based on AlN.
- Contributing to the development and validation of PDK components, including layout, simulation, and documentation.
- Generating layout from design and performing design rule checks
- Characterizing fabricated devices in the lab (optical/electrical testing) and analyzing measurement data
- Designing improvements based on characterization results to enhance device performance and yield
- Collaborating closely with process and fabrication teams to ensure high design-to-fab fidelity
- Contributing to reporting, documentation, publication, IP generation, and patent application
- Supporting industry and academic collaborations within multidisciplinary projects
|
|
|
Senior Research Engineer – Technology development and process integration for MEMS-based applications (all genders)
- Technology development for MEMS-based devices in various fields such as optics, acoustic, inertial sensors from concept to prototype.
- Development and implementation of DOE to improve device performance.
- Microfabrication and prototyping in cleanroom facility by using 200 mm wafer level technology.
- Advanced testing of developed MEMS devices (electrical, mechanical, acoustic, …).
- Scientific communication / reporting of research results.
|
DEINE AUFGABEN
- Aufbauen und Pflegen vertrauensvoller Kundenbeziehungen – mit einem feinen Gespür für Menschen, Rollen und Beziehungsdynamiken
- Projekt(beg)leitung - Angefangen von der Analyse bis hin zum Einsatz beim Kunden und darüber hinaus
- Effiziente Durchführung von Analysen, Interviews, Moderationen von Workshops und deren Dokumentation beim Kunden
- Berücksichtigen ethischer Aspekte im Projektalltag – für verantwortungsvolle Entscheidungen und nachhaltige Lösungen
|
Vollzeit | Teilzeit | Praktikum
|
Research Engineer – Solid-state quantum systems on chip (all genders)
- Experimental work in the Applied Quantum Sensing team
- Design, develop, and test optical, electronic, magnetic, and microwave solutions for quantum systems-on-chip.
- Drive the development and exploration of novel quantum control protocols and implement software and hardware solutions.
|
Senior Research Engineer – Nitride Thin-Film Materials (Wide Band Gap) (all genders)
- Development of thin films for piezoelectric and wide-band-gap applications.
- Design and execute experiments to optimize nitride thin film materials, guided by device specifications and performance feedback.
- Structural and functional (e.g. dielectric, electrical, ferroelectric) characterization of the deposited thin films.
- Collaboration with design, fabrication, characterization, and process engineer teams to optimize full process flow and device performance.
- Definition of strategies for material optimization and pursuing scientifically relevant investigations.
- Development of strategies to address novel material properties and novel fields of application.
- Contributing to the standardization of procedures and workflows within the Unit.
- Filing IP disclosures whenever possible and appropriate.
- Contribution to scientific dissemination (publications in high-impact peer-reviewed journals, presentations at conferences).
- Contribution to Unit workflows, project acquisition and project management.
- Position is offered within the Chips JU Pilot Lines.
|
Semiconductor Equipment Engineer (all genders)
- Independently carrying out maintenance, troubleshooting, and servicing of high-end cleanroom equipment
- Planning and coordinating preventive and corrective maintenance activities on semiconductor tools
- Supporting the continuous improvement of maintenance processes and equipment reliability within the cleanroom environment
- Performing regular inspections of cleanroom facilities and infrastructure
- Assisting the cleanroom team with daily operational and technical tasks
- Preparing and maintaining technical documentation, maintenance records, and operating procedures
- Working closely with equipment suppliers and process engineers to improve tool performance and support advanced process development
- Coordinating service activities with external vendors as well as internal stakeholders
- Supporting organizational and administrative activities within the team to ensure smooth day-to-day operations
|
Senior Scientist - Ion-trap chips (all genders)
- Establishment of infrastructure and set-ups for testing and operation of ion trap devices and development of ion trap systems for Quantum technology applications.
- Coordination and alignment of internal efforts and activities with industrial and academic partners in the pilot line.
- Contribution to design, simulation and characterization of new ion trap chips.
- Dissemination, communication and reporting of research findings to both scientific and non-scientific audiences.
- Supervision of students.
- Activities in relevant networks.
- Project management.
- Project and funding acquisition.
|
Teilzeit | befristet | Praktikum
|
Vollzeit | Teilzeit | befristet | Praktikum
|
|
|
Responsibilities:
- Conduct applied research in humanoid robotics, with a focus on kinematics, dynamics, full-body control, balance, motion planning, and industrial task execution
- Support commissioning, calibration, and testing of humanoid robot platforms, including actuators, sensors, SDK interfaces, safety functions, and operational procedures
- Develop and maintain ROS 2-based software modules for robot state handling, motion commands, sensor interfaces, simulation, data logging, and task execution
- Implement and evaluate classical robot-control methods such as inverse kinematics, inverse dynamics, impedance/admittance control, feedback control, model predictive control, and torque-level control
- Support whole-body motion generation for humanoid manipulation tasks such as reaching, grasping, button pressing, pick-and-place, object handover, inspection, and simple machine-operation tasks
- Assist in translating research outcomes into teaching activities and course content
- Co-supervise bachelor’s theses related to ongoing research projects
- Support proposal preparation for public research funding and cooperation with industry partners
- Actively represent the research group in scientific networks and at conferences
|
In your career, let’s prove what’s possible.
- Creation of initial BOM Structure for Development Programs according to the Product Option Architecture
- Implementation and release of new options and features on released Spin Clean products
- Driving releases from development state to HVM Lifecycle
- Preparing Bill of Materials for automated BOM Creation (SAP Item Text rules)
- Maintaining Bill of Materials via engineering change management process (ECM) and structure components according to manufacturing procedures
- Working with cross functional teams on product integration and maintenance
- being the engineering interface to Product- and configuration Management
- Acting as the Single point of contact for Problem Reports (and escalations) from remote factory and on-site production for BOM related questions
- Executing FMEA’s (Failure Mode and effects analysis) – Act as the moderator – leading a cross functional team of experts to identify risks and error cases of modules currently in development. Presents results in a CFT meeting (including executive management)
|
R&D Process Engineer - Stepper-based Lithography (all genders)
- Develop, optimize, and maintain stepper-based lithography processes for a diverse multi-project R&D environment.
- Establish repeatable process baselines and maintain control through SPC and routine performance monitoring.
- Define and document process parameters, recipes, and SOPs to support repeatable user operation.
- Own stepper tool and periphery equipment, ensuring high uptime and consistent performance for multiple technologies and flows.
- Work closely with process engineers and users to ensure lithography compatibility across varied fabrication flows.
- Work closely with equipment maintenance engineers to ensure tool health.
- Lead hands-on troubleshooting, root cause analysis, and continuous improvement in a fast-changing R&D setting.
- Support tool upgrades, new installations, and capability expansion projects.
|
Vollzeit | Leasing, Zeitarbeit
|
|
|
|
|
